Question 1

Define plates as associated with steel materials and give the symbol for plate steel.

Accepted Answer

. Plates are flat pieces of steel of various thicknesses used at the intersection of different members and for the fabrication of custom connectors. Symbol: PL or P.

Question 2

How is a bond beam constructed? 59728_ch22_EOC_ptg01.indd 1 22/02/16 11:03 am

Accepted Answer

. Steel is placed in a block with a channel or cell running through it, and grout or concrete is poured into the cells to reinforce the structure.

Question 3

Identify the three basic methods of using concrete for build- ing construction.

Accepted Answer

Poured in place at the job site. Formed at the job site and lifted into place. Formed off-site and delivered ready to be put in place.

Question 4

Briefly describe welded wire reinforcement.

Accepted Answer

Welded wire reinforcement is m

Question 5

Describe bars as associated with steel materials.

Accepted Answer

. Bars are the smallest of structural st

Question 6

Identify the primary components of concrete.

Accepted Answer

Portland c

Question 7

Describe the modular principles of concrete block construction.

Accepted Answer

. Wall lengths, opening locati

Question 8

Give a sample equal leg angle callout.

Accepted Answer

The answer of Give a sample equal leg angle callout....

Question 9

How should location dimensions be established to the following members?

Accepted Answer

. a. To centerline i

Question 10

Describe the purpose of placing reinforcing steel in pouredin- place concrete.

Accepted Answer

Used to re

Question 11

Give a sample pipe callout.

Accepted Answer

The answer of Give a sample pipe callout....

Question 12

Give a sample rebar callout.

Accepted Answer

The answer of Give a sample rebar callout....

Question 13

Name at least three types of structural systems commonly used for prefabricated steel structure systems.

Accepted Answer

. Single-span ridge

Question 14

Give a sample rectangular tubing callout. 2

Accepted Answer

The answer of Give a sample rectangular tubing callout. 2...

Question 15

Define precast-prestressed concrete.

Accepted Answer

. Concrete is prestressed by placing ste

Question 16

How should concrete rebar clear distances be dimensioned?

Accepted Answer

. From the surface o

Question 17

Describe how welded wire reinforcement is specified.

Accepted Answer

The answer of Describe how welded wire reinforcement is specified....

Question 18

Describe a panelized roof system.

Accepted Answer

The answer of Describe a panelized roof system....

Question 19

Give a sample glulam callout.

Accepted Answer

The answer of Give a sample glulam callout....

Question 20

What type of bolt head is assumed unless otherwise speci- fied on a drawing?

Accepted Answer

The answer of What type of bolt head is assumed...

Exam 22: Structural Drafting

Define plates as associated with steel materials and give the symbol for plate steel.

How is a bond beam constructed? 59728_ch22_EOC_ptg01.indd 1 22/02/16 11:03 am

Identify the three basic methods of using concrete for build- ing construction.

Briefly describe welded wire reinforcement.

Describe bars as associated with steel materials.

Identify the primary components of concrete.

Describe the modular principles of concrete block construction.

Give a sample equal leg angle callout.

How should location dimensions be established to the following members?

Describe the purpose of placing reinforcing steel in pouredin- place concrete.

Give a sample pipe callout.

Give a sample rebar callout.

Name at least three types of structural systems commonly used for prefabricated steel structure systems.

Give a sample rectangular tubing callout. 2

Define precast-prestressed concrete.

How should concrete rebar clear distances be dimensioned?

Describe how welded wire reinforcement is specified.

Describe a panelized roof system.

Give a sample glulam callout.

What type of bolt head is assumed unless otherwise speci- fied on a drawing?

Introduction to Engineering Drawing and Design Test

Drafting Equipment, Media, and Reproduction Methods

Computer-Aided Design and Drafting Cadd

Manufacturing Materials and Processes

Sketching Applications

Lines and Lettering

Drafting Geometry

Multiviews

Auxiliary Views

Dimensioning

Fasteners and

Sections, Revolutions, and Conventional Breaks

Geometric Dimensioning and Tolerancing

Pictorial Drawings and Technical Illustrations

Working Drawings

Mechanisms: Linkages, Cams, Gears, and Bearings

Belt and Chain Drives

Welding Processes and Representations

Precision Sheet Metal Drafting

Electrical and Electronic Drafting

Industrial Process Piping

Heating, Ventilating, and Air-Conditioning Hvac, and Pattern Development

Civil Drafting Problems

Filters