Deck 6: Delta - Designing HPE Server Solutions

Question 1

An HPE Synergy compute module has a template-based server profile with two identically configured connections, each containing five VLANs. What is the most efficient method the integrator can use to add a new VLAN to each connection?

A) Add the new VLAN to the network set configured in the profile template, and update the server profile from the template
B) Add the new VLAN under Edit server profile connections
C) Add the new VLAN to the network set configured in the profile template
D) Add the new VLAN under Edit server profile connections in the profile template, and update the server profile from the template

Answer 1

Add the new VLAN to the network set configured in the profile template, and update the server profile from the template

Question 2

What must an integrator do before an existing cluster can be imported to the HPE Composer?

A) The vCenter Server must be integrated with the HPE Composer
B) The cluster must be vSAN enabled
C) The HPE Composer must have at least two management interfaces to connect to the cluster
D) The cluster must be enabled for HPE Composer integration

Answer 2

The vCenter Server must be integrated with the HPE Composer

Question 3

What are valid uses for an IPv4 address pool when configuring an HPE Synergy solution? (Choose two.)

A) assignment of IP addresses for NICs in an operating system
B) assignment of IP addresses for Composer appliances
C) assignment of IP addresses for PXE booting to a deployment server
D) assignment of IP addresses for interconnect modules
E) assignment of IP addresses for iLOs

Answer 3

assignment of IP addresses for interconnect modules
assignment of IP addresses for iLOs

Question 4

Which management tool required by HPE Infosight must be deployed at the customer site?

A) HPE Global Dashboard
B) HPE OneView
C) HPE iLO Amplifier
D) HPE StoreServ Management Console (SSMC)

Question 5

In a 3-frame HPE Synergy environment, how should an integrator place the image Streamer modules to allow for redundancy to all of the management connections?

A) one Image Streamer module in frame 2, and a second Image Streamer Module in frame 3 (2 total)
B) two Image Streamer modules in frame 2, and two Image Streamer modules in frame 3 (4 total)
C) one Image Streamer module in each Synergy frame (3 total)
D) two Image Streamer modules in frame 1 (2 total)

Question 6

A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server. Which OS build plan managed by HPE OneView for vCenter Server can the customer use?

A) ICsp-Based Deployment
B) iLO Federation-Based Deployment
C) Image Streamer-Based Deployment
D) PXE-Based Deployment

Question 7

How many redundant fabrics are supported in an HPE Synergy frame?

A) 1
B) 2
C) 3
D) 4

Question 8

An integrator prepares deployment documents with the list of all the hardware and software components. The integrator also needs a list of all infrastructure services deployed, with the functionality described. Which services are provided by the vCenter Server component and should be placed in the report? (Choose two.)

A) Auto Deploy
B) Single Sign-On
C) Update Manager
D) Lookup Service
E) Certificate Authority

Question 9

An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames. Which configuration steps must the integrator perform to provide the customer with this functionality?

A) Enable Remote Support and Insight Online Integration in the Composer UI
B) Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
C) Configure OneView with iLO Amplifier pack
D) Activate iLO Federation on all installed compute nodes

Question 10

Which HPE Synergy D3940 storage module configuration is valid?

A) a single RAID set to be shared across the SAS fabric to multiple compute nodes as a virtualization host datastore
B) maximum of three HPE Synergy D3940 storage modules per frame to be used by any compute module within the management ring
C) any number of the drives from storage module to be mapped to any single compute node
D) a pair of disks to house Composer backups and Synergy firmware bundles

Question 11

A customer has a datacenter with 3-frame Master/Satellite Synergy solution. They plan to add two additional frames to the remote datacenter, but they want to have a single management tool. How should the integrator set up the management of the datacenter?

A) Add two frames from the remote datacenter as remote enclosures using existing Composer
B) Install one Composer in every frame in both local and remote datacenter
C) Deploy one Composer in each site and link them together
D) Connect the management links with fibre cables if the distance between datacenters is more than 500m

Question 12

A customer is planning an HPE Synergy solution with 20 frames and needs to minimize the number of management ports that are required to connect the frames into the existing management network. Which procedure should the integrator use to address the customer's concern?

A) Connect the RJ-45 front ports of each frame to an external switch. Then, connect the uplink from the external switch into the customer's management network.
B) Connect FLMs from all frames to two external switches for redundancy. Then, connect the two uplinks from the two switches into the customer's management network.
C) Connect the RJ-45 front ports of each frame to two external switches for redundancy. Then, connect the uplink from the two switches into the customer's management network.
D) Connect FLMs from all frames into a management ring. Then, connect the management ring to the customer's management network using two uplinks.

Question 13

A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails. What must an integrator do to fix this problem?

A) Install the snapshot agent on the operating system to enable online snapshot operations
B) Select the "Force" checkbox to ignore the warning, and revert to the snapshot because this is a data volume
C) Navigate to the SSMC and revert to the snapshot using HPE 3PAR tools
D) Disconnect the volume from the server, then revert to the snapshot and reconnect back to the server

Question 14

How can an integrator use an HPE Synergy D3940 storage module to provision shared storage to compute modules without requiring a separate SAN to be connected to the frame?

A) Configure drives as DAS storage, and use Image Streamer to present the disks as iSCSI targets to the whole frame.
B) Configure drives as SAN storage, and configure a Smart Array P416ie-m Controller into HBA mode. Add the SAN disk to the server profile.
C) Configure drives as DAS storage, and use StoreVirtual VSA to present the disks as iSCSI storage to the whole frame.
D) Configure drives as SAN storage, and configure a P240nr array controller into HBA mode. Add the SAN disk to the server profile.

Question 15

A customer needs to evaluate Image Streamer as Proof-of-Concept (PoC) in a test and development tab environment. At a minimum, what does a Synergy integrator need in order to support this requirement?

A) a three-frame environment with redundant composer and Image Streamer appliances
B) a single frame with single composer and Image Streamer appliances
C) a two-frame environment with single composer and Image Streamer appliances
D) a single frame with redundant Image Streamer appliances

Question 16

A customer has forgotten the password for the HPE Composer managing the customer's HPE Synergy Infrastructure. Where can the customer reset the password with the assistance of HPE Support?

A) FLM Access to Synergy Console
B) Virtual Center server
C) Front Access Panel to Synergy Console
D) Maintenance Console screen

Question 17

A customer needs to aggregate uplink ports from two Virtual Connect interconnects to increase bandwidth and availability of the networks configured for HPE Synergy platform. Which steps must the integrator perform in the configuration to meet the customer's needs?

A) Connect Satellite modules using Ports L1 and L4
B) Connect Ports Q7 and Q8 on the Master interconnect Modules (ICM)
C) Install Redundant Frame Link Modules and a second management ring
D) Enable Intelligent Resilient Fabric (IRF) on the Virtual Connect Modules

Question 18

Which storage solution can be used for volume provisioning using HPE Composer?

A) MSA 2040
B) HPE StoreEasy 1560
C) HPE 3PAR StoreServ
D) HPE XP7 Storage

Question 19

A customer needs to expand a single-frame Synergy solution to two frames. What should the integrator do to establish a proper management network for the two frames?

A) Connect the RJ-45 management ports of the Virtual Connect modules together with redundant CAT6A cables.
B) Disconnect the existing management ring, and cable the Frame Link Modules in the first frame to the Frame Link Modules in the added frame.
C) Connect the RJ-45 front panel connectors on the two frames together with a single CAT6A cable.
D) In the Synergy console, select the Frame Link Modules in the new frame and define the connection between them.

Question 20

A customer needs to significantly improve I/O performance to a database server. Which product should an integrator implement as part of a Synergy composable solution?

A) HPE Synergy D3940 storage module with SSD drives
B) HPE Composer with NVMe drives
C) HPE Synergy compute module with a Tesla accelerator
D) HPE Synergy Image Streamer

Question 21

An integrator is performing initial configuration of three-frame Synergy solution with HPE Image Streamer. Which networks must be created for this configuration? (Choose two.)

A) management
B) data
C) console
D) deployment
E) internal

Question 22

A customer has a five-frame Synergy deployment with redundant Composers. An integrator needs to install Image Streamer. What must the integrator consider before taking the planned action?

A) Image Streamer requires the use of the MGMT port from both of the FLMs in the frame where the Image Streamer appliance is installed
B) The frame where the Image Streamer is being installed must not contain an Interconnect Module
C) The location of the Image Streamer must be manually modified through the Composer
D) A connection to the management network must be established to an FLM in the same frame that houses the Image Streamer

Question 23

Refer to the exhibit. An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available. What is the likely cause of this issue?

A) FCoE capable interconnect modules are not installed in the Synergy frame
B) Defined FCoE network is not associated with a SAN or does not have VLAN Id defined
C) A FCoE connection is not available, as there is no LIG configured for FCoE connectivity
D) The FCoE connection has not been added as a Fibre Channel connection within a server profile

Question 24

A customer has received a second frame for their HPE Synergy environment. The customer has added the second frame to the rack and correctly cabled the power and management ring. Based on the design shown, which changes need to be made to the configuration to ensure high availability? (Choose two.)

A) Split the management uplinks across both frames
B) Configure high availability in vCenter for the HPE OneView appliance
C) Configure high availability on the Frame Link Modules
D) Enable high availability in the Settings of the Composer
E) Move one of the Composers to the second frame

Question 25

An integrator is validating an HPE Synergy solution design for a customer that has the following requirements: 20 half-height compute modules 2x 20Gb connectivity to each compute module single fabric domain for LAN and SAN connectivity single management network for managing the solution no single point of failure The compute modules boot from a 3PAR array connected to the Synergy Interconnect modules through a pair of Brocade Fibre Channel switches. Which components must be part of the solution? (Choose two.)

A) four HPE Synergy FC SE 40Gb F8 modules
B) two HPE Synergy Composes
C) two Frame Link Modules in each HPE Synergy 12000 Frame
D) two HPE Synergy Image Streamers
E) redundant Frame Link Module Front Panel

Question 26

An integrator has planned a highly available Synergy Composable Fabric with 20Gb Interconnect Link Modules. What is the maximum number of SY 480 Gen10 compute modules the integrator can install into this configuration?

A) 24
B) 36
C) 48
D) 60

Question 27

During an initial setup of a Synergy environment, an integrator needs to enable or disable authorized Service access. What will be the outcome when the integrator disables this service?

A) Authenticated administrators will be unable to make changes to the system
B) Authorized users will be unable to generate a support dump
C) Authenticated administrators will be unable to access the system
D) Authorized support will be unable to diagnose the system

Question 28

A customer is considering implementing a DRS cluster, but they would like to know how DRS can help to achieve performance goals. How should an integrator respond?

A) When powering on a virtual machine, a DRS cluster can automatically place it on the optimal host.
B) Selected virtual machines will be assigned higher priority when the amount of physical resources will drop below a specific level.
C) A DRS cluster will migrate a virtual machine to a different host when available network bandwidth will drop below a specific level.
D) If more than 50 virtual machines will be running on a single host, DRS cluster will configure CPU affinity to proportional resource allocation.

Question 29

What is the main difference between HPE SimpliVity 2600 and HPE SimpliVity 380?

A) HPE SimpliVity 380 is shipped in 5-node cluster configuration, while SimpliVity 2600 offers flexible expanding
B) HPE SimpliVity 380 integrates with Hyper-V only, while HPE SimpliVity 2600 supports any virtualization platform
C) HPE SimpliVity 380 is licensed per virtual machine, while HPE SimpliVity 2600 is licensed per capacity
D) HPE SimpliVity 380 uses hardware deduplication, while HPE SimpliVity 2600 uses software deduplication

Question 30

A customer connected a logical drive from 3PAR StoreServ array to the Windows Server 2016 as a data drive. The customer complains that in the Disk Manager, they can see the same volume four times. What can an integrator do to fix this issue?

A) Delete any three logical drives and leave one of them
B) Go to the SSMC and enable multipathing option for this volume
C) Create an NTFS partition on any logical drive to consolidate the logical drives
D) Install an MPIO component to hide redundant paths to the volume

Question 31

Using a two-port FLM, what is the minimum number of frames needed to implement a solution that includes redundant Composers and Image Streamers?

A) 1
B) 2
C) 3
D) 4

Question 32

Which technology used in HPE SimpliVity allows a reduction in storage consumption?

A) trunking
B) hashing
C) consolidation
D) compression

Question 33

Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?

A) HPE Intelligent Provisioning
B) HPE Global Dashboard
C) iLO Amplifier Pack
D) HPE Composer

Question 34

A customer wants to boot Synergy compute nodes from external LUN located on HPE MSA 2050 SAN Storage. What should an integrator consider when implementing this configuration?

A) Using HPE Composer, only volumes up to 4TB can be created on the MSA2050
B) Additional integration license must be purchased for the MSA2050 and Synergy platforms
C) Automated zoning functionality cannot be used, as MSA2050 is not supported in HPE Composer
D) MSA2050 must be imported first to the HPE Composer before volume presentation can be done

Question 35

Refer to the exhibit. A customer has an HPE Synergy 2-frame configuration, as shown. The customer has a new project and needs to increase the number of compute modules. What is the maximum number of compute nodes that the customer's fabric could support?

A) 24
B) 36
C) 48
D) 60

Question 36

A customer is expanding its Synergy environment from one rack with a 3-frame master/satellite configuration to five racks (15 Synergy Frames) with identical hardware configurations. What must the integrator do to perform this Synergy expansion?

A) Create new Logical Enclosure (LE), Logical Enclosure Group (LIG), and Enclosure Group (EG) for each rack
B) Create a new Logical Enclosure (LE) for each rack using existing templates
C) Re-home the Logical Enclosure (LE) using the edited Enclosure Group (EG) and Logical Interconnect Group (LIG)
D) Perform hardware discovery from the console, and copy the Logical Enclosure (LE)

Question 37

Using SSMC, an integrator has added a new CPG on the HPE 3PAR StoreServ array integrated with HPE Composer. The new CPG is not visible in the HPE Composer. What must the integrator do to see the new CPG in the HPE Composer console?

A) Run the discovery process on the 3PAR StoreServ array from the SSMC interface.
B) Add the CPG using the HPE Composer interface.
C) Add the CPG to the Storage Components scope using the SSMC interface.
D) Run the refresh procedure on the 3PAR StoreServ array from HPE Composer

Question 38

Refer to the exhibit. A Synergy integrator needs to establish the module cluster links between two master modules, as shown. Which ports can the integrator use for the module cluster links?

A) 1 and 2
B) 3 and 4
C) 5 and 6
D) 7 and 8

Question 39

Refer to the exhibit. An integrator needs to create a volume on the FC_r6 CPG using HPE Composer, but the CPG is not available for provisioning. The integrator checked the Storage Pools section, and the CPG is visible. What must the integrator do to enable volume provisioning on this CPG?

A) Select this CPG in the HPE Composer, select Edit from the Action menu, and change the CPG state to Managed
B) Navigate to the Storage Systems section in the HPE Composer, select the 3PAR array, and re-import required CPG
C) Login to the SSMC and add the HPE Composer certificate for the CPGs which are in the Discovered state
D) Login to the HPE SSMC and remove the read only parameter for this CPG

Question 40

A customer has forgotten the password for the HPE Composer managing the customer's HPE Synergy infrastructure. Which information is needed to regain access to the console? (Choose two.)

A) management IP address
B) appliance IP address
C) serial number
D) request code
E) authorization code

Question 41

A customer needs to deploy additional management components, such as vCenter Server and HPE Global Dashboard. According to HPE best practices, how should an integrator deploy these components?

A) Deploy VMware HA cluster on two dedicated management servers, then deploy management components to this cluster.
B) Deploy vCenter Server as a virtual machine on the Hyper-V host and HPE Global Dashboard to the domain controller.
C) Install vCenter Server on the domain controller, then deploy HPE Global Dashboard to the HPE Composer or HPE OneView appliance.
D) Deploy vCenter Server to any Windows machine, and install HPE Global Dashboard on the same server.

Question 42

A customer wants to add nodes to the existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?

A) The cluster must be imported to HPE OneView
B) An additional VMkernel port must be created for OneView integration
C) All local datastores must be disconnected or removed from the other cluster nodes
D) At least one node of the cluster must be placed in the maintenance mode

Question 43

Is this a correct statement about how containers fit within a DevOps model? Containers help to provide simple deployment and scaling for applications in production, but only if the customer deploys them within an orchestration solution.

A) Yes
B) No

Question 44

A customer is unable to boot to a 3.5TB volume created and presented to a compute node. What is likely preventing the boot?

A) The system is set to UEFI instead of Legacy Boot mode
B) The system is set to Legacy Boot mode instead of UEFI
C) Boot volumes larger than 2.2TB are not supported on Synergy
D) Boot volumes larger than 3TB are not supported on HPE Synergy

Question 45

Refer to the exhibit. A customer with the design shown needs to perform an in-place upgrade to its environment to scale the two-frame single homed Multimodule Link Aggregation Group (MLAG) configuration to a three-frame configuration. The new frame needs to provide a redundant 20Gb connection for the compute module ports in Fabric 3. Which interconnect modules should the integrator use in Frame 3?

A) HPE Virtual Connect SE 40Gb F8 module in bay 3 and HPE Virtual Connect SE 40Gb F8 Module in bay 6
B) HPE Synergy 10Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6
C) HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 20Gb Interconnect Link Module in bay 6
D) HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6

Question 46

A customer needs a new infrastructure solution for its VMware vSphere environment. Is this a valid proposal to give the customer the benefits of cluster aware management with HPE OneView for vCenter (OV4VC)? HPE Synergy solution with Virtual Connect (VC) modules

A) Yes
B) No

Question 47

A customer using HPE Synergy is unable to access certain VLANs from a single NIC port of a compute module. Which configuration option in the server profile needs to be verified to ensure that the server profile has the correct configuration?

A) multiple Networks are assigned to the connection
B) multiple VLAN checkbox is selected
C) VxLAN has not been enabled
D) assigned Network Set includes all needed VLANs

Question 48

Is this a reason to use VVols on an HPE storage array to support a VMware vSphere environment? because VVol acts as plug-ins, integrating array monitoring and management on vCenter

A) Yes
B) No

Question 49

A customer has a Hyper-V and ESXi hypervisors deployed on an HPE Synergy platform. The customer needs a tool that will provide health and performance monitoring. Because their environment is very dynamic, the tool should also help them to optimize performance and predict and prevent problems. Which tool should the customer use?

A) HPE InfoSight
B) HPE OneView for vCenter Server
C) HPE Composer
D) HPE Global Dashboard

Question 50

During a first-time installation of HPE Synergy, an external monitor is not available to the integrator. Which approach should the integrator take to perform the first-time setup?

A) Download MSTCS, connect the laptop to the front Panel Ethernet port, and open a RDP Session to 192.168.10.1 on port 443.
B) Download VNC Viewer, connect the laptop to the front Panel Ethernet port, and open a VNC-connection to 192.168.10.1 on port 5900.
C) Download Telnet, connect the laptop to the front Panel Ethernet port, and open a connection to 192.168.10.1 on port 8443.
D) Download PuTTY, connect the laptop to the front Panel Ethernet port, and open an SSH connection to 192.168.10.1 on any port (default is 22).

Question 51

Which policy can an integrator apply when creating a datastore using HPE OneView for vCenter Server?

A) Data at Rest encryption policy
B) Round Robin load balancing policy
C) Recovery Manager Central policy
D) virtual machine Restart policy

Question 52

A customer is planning to deploy OneView for vCenter Server to improve management procedures for growing virtualization environment. The customer is concerned about resources required by HPE OneView for vCenter Server. Which statement about deploying HPE OneView for vCenter Server is true?

A) It is deployed as an application on the Windows Server machine with at least 48GB of memory.
B) It is deployed as a part of the HPE Composer installation.
C) It is deployed as a virtual machine on the supported hypervisor.
D) It can only be deployed if HPE Global Dashboard is already installed.

Question 53

A customer needs a new infrastructure solution for its VMware vSphere environment. Is this a valid proposal to give the customer the benefits of cluster aware management with HPE OneView for vCenter (OV4VC)? HPE ProLiant DL servers with HPE ILO Advanced licenses

A) Yes
B) No

Question 54

Which component of the HPE Synergy solution should you use to set the firmware/driver baseline and the installation method for Synergy Compute nodes?

A) Composer
B) Smart Update
C) Image Streamer
D) Global Dashboard

Question 55

A Synergy integrator is unable to assign an HPE 3PAR Virtual Volume to a new server profile in HPE Composer. The Virtual Volume has been previously assigned to another profile. Which setting in HPE Composer is preventing the integrator from assigning the volume to the new profile?

A) private, in the volume properties
B) shared, in the volume properties
C) private, in the storage pool properties
D) shared, in the storage pool properties

Question 56

A customer needs to upgrade an HPE Synergy 12000 frame with an HPE Virtual Connect SE 32Gb Fibre Channel (FC) Module. Which steps must the integrator take to install the upgrade?

A) Modify the Synergy 40Gb F8 Logical Interconnect Group (LIG), and add the FC uplink set and storage networks.
B) Create one redundant Logical Interconnect Group (LIG) with two uplink sets, one for SAN-A and one for SAN-B.
C) Create two new Logical Interconnect Groups (LIGs) that are non-redundant Side-A/Side-B, one for SAN-A and one for SAN-B.
D) Edit the Enclosure Group and specify HPE Virtual Connect SE 32Gb FC Module in interconnect bays 1 and 2.

Question 57

Is this a typical use case for a cluster of HPE SimpliVity 380Gs? software-defined storage (SDS) for Microsoft Hyper-V environments

A) Yes
B) No

Question 58

A customer has an HPE SimpliVity Federation based on VMware. The customer wants to add self-service catalogs that users can use to establish services built on the SimpliVity cluster. Provisioning services will require workflows that include tasks, including cloning VMs and creating datastores. Is this a way to achieve this goal? Deploy HPE Composable Fabric for SimpliVity.

A) Yes
B) No

Question 59

Is this an essential component to include in the control layer of a software defined infrastructure (SDI)? Agile business applications

A) Yes
B) No

Question 60

A customer needs to deploy a farm of Windows Server 2019 Hyper-V using an Image Streamer. The customer discovered that the OS Build Plan for this OS is not available from the Image Streamer interface. How can the customer access all the tools and scripts needed to provision the required operating system?

A) The customer has to update Image Streamer firmware, as with the new firmware all OS Build Plans are updated and new ones are added.
B) The customer must buy an Image Streamer upgrade license to get support for the latest operating systems.
C) The customer needs to download the artifact bundle from the internet that will provide all required components.
D) The customer can use any Windows build plan because they are self-updating.

Question 61

A customer has a Microsoft Hyper-V virtualized environment. You are helping a customer replace some of the hosts with an HPE SimpliVity cluster. Is this a correct guideline for adding and managing the new cluster? Use the Deployment Manager with Microsoft System Center Virtual Machine Manager (SCVMM) to add nodes to SCVMM one at a time.

A) Yes
B) No

Question 62

Is this a guideline for deploying HPE SimpliVity networks? The Storage network should have jumbo frames enabled (MTU of 9000).

A) Yes
B) No

Question 63

You are proposing an HPE Synergy solution for the customer's VMware vSphere environment. Is this a guideline for supporting ease of provisioning, management, and monitoring for the software-defined infrastructure? Use Synergy server profile templates to support simplified scaling.

A) Yes
B) No

Question 64

A customer has a Microsoft Hyper-V environment and wants to be able to deploy an OS on bare metal HPE ProLiant servers with Microsoft System Center Virtual Machine Manager (SCVMM). Is this part of the process for enabling this feature? Use extracted drivers to create an HPE ProLiant Updates Catalog (PUC).

A) Yes
B) No

Question 65

Is this a requirement for using the grow cluster feature in HPE OneView for vCenter (OV4VC)? The existing cluster members are discovered and managed in HPE OneView, but not in vCenter.

A) Yes
B) No

Question 66

A customer has a Red Hat OpenShift Container Platform (OCP) solution. You suggest deploying HPE Nimble and the HPE CSI Driver. With this proposal, can HPE Nimble fulfill this role for the solution? Host images for the private registry.

A) Yes
B) No

Question 67

Is this a benefit of using NetEdit to manage ARubaOS-CX switches? better change management with the ability to validate changes or rollback changes

A) Yes
B) No

Question 68

A customer has a virtualized data center that uses VMware. The virtualized workloads include latency-sensitive databases. You are considering proposing that the customer move the workloads to HPE SimpliVity. Does this correctly describe how well HPE SimpliVity can handle the latency-sensitive workloads? HPE SimpliVity helps to support low latency by localizing a VM's data on both the node that runs the VM and a backup node that runs the VM if the first node fails.

A) Yes
B) No

Question 69

A customer wants to start using containers. They have decided on Docker containers and Kubernetes for managing the containers, but their IT department not have a great deal of expertise in Kubernetes. The customer requires a packaged solution that supports a private registry and role-based access control. It should also be able to integrate with middleware tools for messaging and CI/CD pipeline management. The customer needs help sorting through orchestration platform options. Is this correct advice that you can provide? Red Hat OpenShift Container Platform (OCP) and Docker Enterprise Engine (EE) both meet the customer's security needs.

A) Yes
B) No

Question 70

Is this a reason that a virtualization farm benefits from deployment on software-defined infrastructure (SDI)? SDI helps customers scale out virtualization farms more quickly.

A) Yes
B) No

Question 71

A customer has a Microsoft Hyper-V virtualized environment. You are helping a customer replace some of the hosts with an HPE SimpliVity cluster. Is this a correct guideline for adding and managing the new cluster? Obtain scripts from HPE to use with the HPE Deployment Manager with Microsoft System Center Virtual Machine Manager (SCVMM).

A) Yes
B) No

Question 72

A customer has a virtualized data center that uses VMware. The virtualized workloads include latency-sensitive databases. You are considering proposing that the customer move the workloads to HPE SimpliVity. Does this correctly describe how well HPE SimpliVity can handle the latency-sensitive workloads? HPE SimpliVity is not recommended for latency sensitive workloads, and you should propose a different solution.

A) Yes
B) No

Question 73

Is this a benefit of using the HPE OneView RESTful API to monitor and manage HPE infrastructure? replacing HTTPS and SSH-based security with the more secure IPMI-based options

A) Yes
B) No

Question 74

A customer has a containerized environment that uses Kubernetes. Developers attached a Volume to a pod, and the Volume disappeared when the pod stopped. Is this a correct way to help the customer preserve data beyond the lifetime of the pod? Make sure that the Volume has the same name as a Virtual Volume on a backend 3PAR array. You can use an HPE-provided Ansible playbook to correlate the two.

A) Yes
B) No

Question 75

The architect must design Microsoft Storage Spaces Direct on HPE infrastructure, in order to meet customer requirements. Is this a correct principle that the architect must consider? Set up RAID 1 or mirroring on the drives with OS volumes.

A) Yes
B) No

Question 76

Refer to the exhibit. The exhibit indicates the customer NSX design and your plan for the connected ToR switches, which are ArubaOS-CX switches. Is this something that you must do to make the network design fit with the customer design? Enable VXLAN on the ArubaOS-CX switches and link VXLAN IDs 5000-5100 to VLAN 10.

A) Yes
B) No

Question 77

The architect must design Microsoft Storage Spaces Direct on HPE infrastructure, in order to meet customer requirements. Is this a correct principle that the architect must consider? Use the same RAID level on storage pool drives and the drives with OS volumes.

A) Yes
B) No

Question 78

Is this a requirement for using the grow cluster feature in HPE OneView for vCenter (OV4VC)? Cluster members have Advanced licenses for OneView.

A) Yes
B) No

Question 79

A customer has a Microsoft Hyper-V virtualized environment. You are helping a customer replace some of the hosts with an HPE SimpliVity cluster. Is this a correct guideline for adding and managing the new cluster? Use the HPE SimpliVity Image Streamer to deploy the Hyper-V hypervisor to the nodes automatically.

A) Yes
B) No

Question 80

You need to help a customer add VMware NSX to a data center which has HPE FlexFabric switches. Each server rack is served by two FlexFabric switches in an IRF stack. The IRF stacks connect to a FlexFabric spine in a leaf-spine architecture. Switch-to-switch links are routed, and the network uses OSPF. Is this how the customer's needs can be met? The physical infrastructure should use OSPF to communicate routes with the NSX ESGs.

A) Yes
B) No