Deck 5: Bill of Materials

Question 1

A bill of materials basically consists of the size (length, width, and thickness), the kind of material, the part name or item number, and the number of pieces required.

Answer 1

True

Question 2

The width of a(n) ____________________ of stock does not exceed 6 inches.

Answer 2

flat bar

Question 3

The first number in the AISI-SAE classification system indicates the ____.

A) nominal percentage of the alloying component
B) basic type of steel
C) actual percentage of carbon content
D) nominal percentage of carbon content

Answer 3

B

Question 4

The last two or three numbers in the AISI-SAE classification system indicate the ____.

A) nominal percentage of the alloying component
B) basic type of steel
C) actual percentage of carbon content
D) nominal percentage of carbon content

Question 5

Low carbon steel has a carbon content of ____. a. .30% and less b. .30% to .50%
C) .50% to .90% d. .80% to 1.50%
ANSWER: a

Question 6

Metal plate is greater than ____ inches in thickness.

A) 3/18
B) 3/16
C) 5/18
D) 5/16

Question 7

To prepare the bill of materials, each part must be considered in relation to the whole.

Question 8

For complex or irregularly shaped objects, ____________________ may be added to the bill of materials to fully describe certain parts.

Question 9

An AISI-SAE classification for a type of steel consists of either three or four numbers.

Question 10

The second number in the AISI-SAE classification system represents the nominal percentage of the ____________________ component.

Question 11

In the American Society for Testing and Materials system, the letter "____________________" is used for nonferrous metals.

Question 12

In the American Society for Testing and Materials system, the letter "____" is used to identify ferrous metals.

A) A
B) B
C) F
D) M

Question 13

Sheet metal is defined as metal ____" or less in thickness and more than 6" in width.

A) 3/16
B) 5/16
C) 3/8
D) 5/8

Question 14

The designer/drafter is seldom required to prepare a list or bill of materials along with weldment drawings.

Question 15

Many companies use a Project ____________________ worksheet in one form or another to track the progress and costs of a project.

Question 16

High carbon steel has a carbon content of ____. a. .30% and less b. .30% to .50%
C) .50% to .90% d. .80% to 1.50%
ANSWER: c

Question 17

Both plate and sheet are available in widths up to ____ inches.

A) 100
B) 150
C) 200
D) 250

Question 18

When it is necessary to specify a particular type of steel in a bill of material, it is often identified by a(n) ____ classification number.

A) SAE-AISI
B) SAE
C) AISI
D) AISI-SAE

Question 19

The list or bill of materials enables some other person, such as a stockroom attendant, a welder's helper, or the operator of flamecutting equipment, to cut or otherwise prepare the various stock pieces needed to fabricate the object.

Question 20

Bills of materials may be included as a part of a ____.

A) Summary Sheet
B) Project Summary Worksheet
C) Project Worksheet
D) Project Summary