Deck 15: Lean Accounting and Productivity Measurement

Full screen (f)
exit full mode
Question
Implementing the value-stream structure requires an increase in employees.
Use Space or
up arrow
down arrow
to flip the card.
Question
The two lean accounting approaches are average-costing and value-stream cost reporting.
Question
Value-stream costing reports the actual revenues and actual costs on a weekly basis for each value stream.
Question
Employee empowerment is a major difference between traditional and lean environments.
Question
The value stream focuses on just value-added activities.
Question
Allocating efficiency chooses the least costly, technically efficient combination of inputs.
Question
Productivity measurement is a quantitative assessment of increases or decreases in productivity.
Question
Customer value is the difference between what a customer receives and what they give up.
Question
Productivity is concerned with the efficiency of input usage in producing output.
Question
Profile measurement provides a series of profiles for all operational measures.
Question
Partial measures allow managers to focus on the use of the total production and are easily interpreted.
Question
Lean manufacturing is concerned with eliminating waste in manufacturing processes.
Question
The disadvantage of using partial measures in isolation is that it can be misleading.
Question
A Box Scorecard is used by the lean control system to compare operational, capacity, and financial figures
Question
The productivity measure of all inputs simultaneously is called total productivity measurement.
Question
Technical efficiency is concerned with a given input using no more than needed output.
Question
Lean manufacturing adds value by reducing labor costs.
Question
Profit-linked productivity measurement involves the measuring of the amount of profit related to productivity change.
Question
Operational partial measures are difficult to interpret by those within an organization.
Question
Changes in product-costing and operational control approaches are crucial to a value-stream based lean manufacturing system.
Question
Lean manufacturing benefits of better quality, reduced lead times, inventory reductions, and reduced setup times result in

A) lower manufacturing costs.
B) increased production rates.
C) reductions in innovative capabilities.
D) both a and b.
Question
The component which provides a server or vector of separate and distinct partial operational measures is called __________ measurement.
Question
Maximizing customer value, on-demand production, and zero setup times are realized in the pursuit of __________ .
Question
__________ allocation is the only allocation used regularly in a value stream cost assignment.
Question
The process of producing output efficiently using the least amount of inputs is
called __________ .
Question
The quantitative assessment of productivity changes is called __________ measurement.
Question
The accounting approach designed to support and encourage lean manufacturing is called __________ accounting.
Question
Identifying value streams may be accomplished by using a two-dimensional matrix where __________ are listed on one dimension, and __________ on a second dimension.
or
or
Question
The achievement of __________ efficiency and __________ efficiency is the point of total productive efficiency.
Question
The departments or cells that contain all the related operations needed to produce a family of products are called __________ .
Question
The worth of one or more features of a product for which customers are willing to pay is called __________ .
Question
Which is NOT a benefit of lean manufacturing?

A) increased productivity
B) reduced lead times
C) reduced direct labor costs
D) reductions in inventory
Question
Lean manufacturing is best defined as

A) an operating approach that reports on the effectiveness of the management of the organization.
B) an operating approach designed to eliminate waste and maximize customer value.
C) an operating approach that is designed to analyze the activities of the organization.
D) an operating approach that is designed to compute variances between expectations and actual performance.
Question
The point at which technical and allocative efficiency are achieved is called __________ efficiency.
Question
The __________ is used by the lean control system to compare operational, capacity, and financial metrics.
Question
The difference between the total profit change and the profit-linked productivity change is
called the __________ component.
Question
A difference between Toyota's lean manufacturing system and Ford's lean enterprise system is

A) Toyota incorporated employee empowerment, team structure, cellular manufacturing, small batches, and reduced setup times as integral pieces of their system.
B) Toyota was not structured to deal with product variety.
C) Toyota valued process over employees.
D) Low volume products were not compatible with either system.
Question
In a lean environment, many overhead costs are assigned to products as directly __________ costs.
Question
Which of the following is NOT a characteristic of a lean manufacturing system?

A) delivery of the right product in the right quantity
B) zero defect
C) delivery of product the exact time a customer needs it
D) all of the above
Question
An assessment of productive efficiency for all inputs combined is called __________ measurement.
Question
The new product value stream focuses on

A) developing new products for new customers.
B) providing current products to current customers.
C) providing current products to new customers and new products to new customers.
D) the production, sale, and delivery of products.
Question
The departments or cells which contain all the operations in close proximity that are needed to produce a family of products.

A) Manufacturing cells
B) Value stream cells
C) Batch departments
D) Plant departments
Question
The processing department can produce one unit every 5 minutes and is the last department before the finishing department. Under traditional manufacturing where a batch equals 10 units, how long will it be before the first unit in the batch can move from the processing department to the finishing department?

A) 5 minutes
B) 50 minutes
C) 10 minutes
D) not enough information is given
Question
In a demand-pull system

A) production is triggered by a forecast.
B) production is triggered by a customer order.
C) production is triggered by a vendor shipment.
D) production is triggered by an economic reorder point.
Question
Reducing the time it takes to configure equipment to produce a different product is an example of

A) cellular manufacturing.
B) batch processing.
C) reduced setup/changeover times.
D) value flow stream.
Question
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. Which area represents the bottleneck operation?</strong> A) finishing B) casting C) molding D) mixing <div style=padding-top: 35px> There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. Which area represents the bottleneck operation?

A) finishing
B) casting
C) molding
D) mixing
Question
To identify value streams using a two-dimensional matrix, the following two items must be utilized:

A) value indicators; costs
B) activities/processes; costs
C) quality indicators; products
D) activities/processes; products
Question
Lean manufacturing shares many of the same methodologies as

A) activity-based management.
B) JIT manufacturing.
C) process costing.
D) none of the above.
Question
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. How long does it take to produce a batch of 20 units under a traditional manufacturing approach?</strong> A) 380 minutes B) 415 minutes C) 35 minutes D) none of the above <div style=padding-top: 35px> There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. How long does it take to produce a batch of 20 units under a traditional manufacturing approach?

A) 380 minutes
B) 415 minutes
C) 35 minutes
D) none of the above
Question
The worth of one or more features of a product for which the customer is willing to pay is defined as:

A) Value
B) Quality
C) Efficiency
D) Innovation
Question
The value stream

A) is made up of all activities, both value-added and non-value-added, required to bring a product group or service from its starting point to a finished product in the hands of the customer.
B) is made up value-added activities required to bring a product group or service from its starting point to a finished product in the hands of the customer.
C) is where the production stream is triggered by forecast.
D) is a series of steps designed to set target costs.
Question
Identification of a "value stream," pursuit of perfection, and making value flow without interruption are examples of

A) total quality management.
B) activity-based costing.
C) principles of lean thinking.
D) Kanban processing.
Question
There are two basic types of non-value added activities. They are

A) activities avoidable in the long run and activities unavoidable in the short run due to current technology or production methods.
B) activities avoidable in the short run and activities unavoidable in the long run due to current technology or production methods.
C) activities unavoidable in the short run due to current technology and activities avoidable due to production methods.
D) activities avoidable in the short run and activities unavoidable in the short run due to current technology or production methods.
Question
In a traditional manufacturing setup

A) there is significant move and wait time.
B) organization is by function into departments.
C) products are produced in large batches.
D) all of the above.
Question
Figure 15-2 The following information relates to Cranmore Manufacturing:
To produce a unit of product:
<strong>Figure 15-2 The following information relates to Cranmore Manufacturing: To produce a unit of product:   There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes. Refer to Figure 15-2. What is the cycle time of operation?</strong> A) 60 minutes B) 20 minutes C) 35 minutes D) 16 minutes <div style=padding-top: 35px> There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes.
Refer to Figure 15-2. What is the cycle time of operation?

A) 60 minutes
B) 20 minutes
C) 35 minutes
D) 16 minutes
Question
Figure 15-2 The following information relates to Cranmore Manufacturing:
To produce a unit of product:
<strong>Figure 15-2 The following information relates to Cranmore Manufacturing: To produce a unit of product:   There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes. Refer to Figure 15-2. If Cranmore produces in batches of 10 units, how much time would have elapsed by the time the 10th unit is produced under a manufacturing cell environment (assuming the cell is processing continuously)?</strong> A) 60 minutes B) 65 minutes C) 150 minutes D) some other amount <div style=padding-top: 35px> There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes.
Refer to Figure 15-2. If Cranmore produces in batches of 10 units, how much time would have elapsed by the time the 10th unit is produced under a manufacturing cell environment (assuming the cell is processing continuously)?

A) 60 minutes
B) 65 minutes
C) 150 minutes
D) some other amount
Question
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. What is the production rate?</strong> A) 8.6 units per hour B) 7 units per hour C) 21 units per hour D) 19 units per hour <div style=padding-top: 35px> There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. What is the production rate?

A) 8.6 units per hour
B) 7 units per hour
C) 21 units per hour
D) 19 units per hour
Question
The order fulfillment value stream focuses on

A) developing new products for new customers.
B) providing current products to current customers.
C) providing current products to new customers and new products to new customers.
D) the production, sale, and delivery of products.
Question
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. How long would it take to process the first unit of a 20-unit batch under a cellular manufacturing setup?</strong> A) 21 minutes B) 12 minutes C) 19 minutes D) 60 minutes <div style=padding-top: 35px> There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. How long would it take to process the first unit of a 20-unit batch under a cellular manufacturing setup?

A) 21 minutes
B) 12 minutes
C) 19 minutes
D) 60 minutes
Question
The production rate

A) tells how many units of a product can be produced by the manufacturing cell.
B) calculates how many minutes it takes an operation to process one unit of product.
C) calculates the processing time of the slowest department.
D) calculates the wait and move time of a production.
Question
In calculating product costs for a value stream with multiple products, average product costs are a good estimate of individual product costs if

A) the products are similar and consume resources in approximately the same proportion.
B) the product mix is relatively stable.
C) the products are homogenous.
D) all of the above.
Question
Emphasis on departmental efficiency

A) causes bottleneck departments to over-produce and build work-in-process inventories.
B) causes stock outs related to demand-pull systems.
C) is a critical component of a lean accounting system.
D) none of the above.
Question
Which of the following is NOT considered a major source of waste?

A) waiting
B) joint products
C) overproduction of goods not needed
D) defective products
Question
Which of the following is true in regards to a lean accounting system?

A) The cost of people with specialized skills, such as industrial engineers, are allocated to all manufacturing cells based on an activity driver.
B) Workers are multiskilled and responsible for setting up equipment, maintaining equipment, and operating equipment.
C) Implementing a value stream system will require more workers.
D) Workers are highly skilled in one specialized area or activity and are not expected to spend time on other value-added activities.
Question
The pursuit of perfection is realized in

A) zero setup times.
B) producing on demand.
C) maximizing customer value.
D) all of the above.
Question
Figure 15-2 The following information relates to Cranmore Manufacturing:
To produce a unit of product:
<strong>Figure 15-2 The following information relates to Cranmore Manufacturing: To produce a unit of product:   There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes. Refer to Figure 16-2. What is the production rate?</strong> A) 12 units per hour B) 20 units per hour C) 15 units per hour D) 7.5 units per hour <div style=padding-top: 35px> There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes.
Refer to Figure 16-2. What is the production rate?

A) 12 units per hour
B) 20 units per hour
C) 15 units per hour
D) 7.5 units per hour
Question
Figure 15 - 3 Based on the following information:
<strong>Figure 15 - 3 Based on the following information:   Refer to Figure 15-3. What is the product cost based on total average conversion cost? (Round to nearest cent.)</strong> A) $100.56 B) $48.32 C) $36.04 D) $50.78 <div style=padding-top: 35px> Refer to Figure 15-3. What is the product cost based on total average conversion cost? (Round to nearest cent.)

A) $100.56
B) $48.32
C) $36.04
D) $50.78
Question
In a lean environment, many overhead costs are assigned to

A) products using driver tracing.
B) products as directly traceable costs.
C) products using allocation methods.
D) costs using plantwide overhead rates.
Question
The document used by the lean control system that compares operational, capacity, and financial metrics with prior week performances and with a future desired state is called:

A) balanced scorecard
B) profit analysis worksheet
C) box scorecard
D) performance improvement plan
Question
If a facility has costs of $100,000 per year and 20,000 square feet, and if 19,000 square feet are absorbed by the value streams, what happens to the unabsorbed cost of the remaining 1,000 feet?

A) allocated to all the value streams based on proportionate square foot usage
B) assigned to all value streams equally
C) absorbed by the largest value stream
D) deducted from revenue as a separate item
Question
In the calculation of product costs for value streams with multiple products, units shipped instead of units produced is used as the denominator because

A) it reduces conversion costs assigned to the value stream.
B) it motivates managers to reduce inventories.
C) units shipped are always greater than units produced.
D) units shipped is not used.
Question
The only allocation used regularly in a value stream cost assignment is

A) facilities.
B) depreciation.
C) maintenance.
D) setup costs.
Question
Which of the following is NOT considered a major source of waste?

A) costs spent on defect detection
B) unnecessary movement of goods
C) unnecessary transport of goods
D) design of goods and services that don't meet the needs of the customer
Question
Which of the following is a reason traditional costing approaches may NOT work in a lean manufacturing environment?

A) Standard costing variances encourage overproduction.
B) Distorted product costs may conceal the outcome of success of a lean system.
C) Traditional operational controls work against demand-pull systems.
D) all of the above.
Question
With multiple products in a value stream, unit cost will increase if

A) more units are shipped than produced.
B) more units are produced than shipped.
C) average conversion cost is used instead of total average cost.
D) none of the above.
Question
Figure 15 - 3 Based on the following information:
<strong>Figure 15 - 3 Based on the following information:   Refer to Figure 15-3. What is the product cost based on total average cost? (Round to nearest cent.)</strong> A) $54.05 B) $42.59 C) $48.32 D) $93.37 <div style=padding-top: 35px> Refer to Figure 15-3. What is the product cost based on total average cost? (Round to nearest cent.)

A) $54.05
B) $42.59
C) $48.32
D) $93.37
Question
Why might labor costs be reduced in a value stream system?

A) The elimination of the need for any specialized skilled employees such as industrial engineers or production schedulers.
B) The labor costs of industrial engineers and production schedulers can be pooled and allocated to the value streams.
C) Some of the workers can be cross-trained to perform value-added activities within the value stream.
D) none of the above.
Question
The JIT solution

A) requires carrying materials inventory in order to lower the cost of inventory without production delays.
B) requires selection of vendors based on lowest cost alone.
C) exploits supplier linkages by negotiating long-term contracts with a few chosen suppliers located closest to the production facility and establishing more supplier involvement.
D) requires a solid forecast to push production.
Question
Which of the following is NOT a limitation of a value stream cost assignment?

A) Initially, it may not be possible to allocate all the people needed in a value stream to that stream exclusively.
B) There will always be some individuals whose related costs will remain outside of any particular value stream.
C) A value stream is usually organized around a family of products.
D) Having a value stream for each product is not practical.
Question
What is the usual formula for calculating product costs for value streams with multiple products?

A) total value stream cost of period / units shipped for period
B) budgeted value stream cost of period / units shipped for period
C) total value stream cost of period / units sold for period
D) budgeted value stream cost of period / forecasted units shipped for period
Unlock Deck
Sign up to unlock the cards in this deck!
Unlock Deck
Unlock Deck
1/172
auto play flashcards
Play
simple tutorial
Full screen (f)
exit full mode
Deck 15: Lean Accounting and Productivity Measurement
1
Implementing the value-stream structure requires an increase in employees.
False
2
The two lean accounting approaches are average-costing and value-stream cost reporting.
False
3
Value-stream costing reports the actual revenues and actual costs on a weekly basis for each value stream.
True
4
Employee empowerment is a major difference between traditional and lean environments.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
5
The value stream focuses on just value-added activities.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
6
Allocating efficiency chooses the least costly, technically efficient combination of inputs.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
7
Productivity measurement is a quantitative assessment of increases or decreases in productivity.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
8
Customer value is the difference between what a customer receives and what they give up.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
9
Productivity is concerned with the efficiency of input usage in producing output.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
10
Profile measurement provides a series of profiles for all operational measures.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
11
Partial measures allow managers to focus on the use of the total production and are easily interpreted.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
12
Lean manufacturing is concerned with eliminating waste in manufacturing processes.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
13
The disadvantage of using partial measures in isolation is that it can be misleading.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
14
A Box Scorecard is used by the lean control system to compare operational, capacity, and financial figures
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
15
The productivity measure of all inputs simultaneously is called total productivity measurement.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
16
Technical efficiency is concerned with a given input using no more than needed output.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
17
Lean manufacturing adds value by reducing labor costs.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
18
Profit-linked productivity measurement involves the measuring of the amount of profit related to productivity change.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
19
Operational partial measures are difficult to interpret by those within an organization.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
20
Changes in product-costing and operational control approaches are crucial to a value-stream based lean manufacturing system.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
21
Lean manufacturing benefits of better quality, reduced lead times, inventory reductions, and reduced setup times result in

A) lower manufacturing costs.
B) increased production rates.
C) reductions in innovative capabilities.
D) both a and b.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
22
The component which provides a server or vector of separate and distinct partial operational measures is called __________ measurement.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
23
Maximizing customer value, on-demand production, and zero setup times are realized in the pursuit of __________ .
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
24
__________ allocation is the only allocation used regularly in a value stream cost assignment.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
25
The process of producing output efficiently using the least amount of inputs is
called __________ .
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
26
The quantitative assessment of productivity changes is called __________ measurement.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
27
The accounting approach designed to support and encourage lean manufacturing is called __________ accounting.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
28
Identifying value streams may be accomplished by using a two-dimensional matrix where __________ are listed on one dimension, and __________ on a second dimension.
or
or
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
29
The achievement of __________ efficiency and __________ efficiency is the point of total productive efficiency.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
30
The departments or cells that contain all the related operations needed to produce a family of products are called __________ .
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
31
The worth of one or more features of a product for which customers are willing to pay is called __________ .
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
32
Which is NOT a benefit of lean manufacturing?

A) increased productivity
B) reduced lead times
C) reduced direct labor costs
D) reductions in inventory
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
33
Lean manufacturing is best defined as

A) an operating approach that reports on the effectiveness of the management of the organization.
B) an operating approach designed to eliminate waste and maximize customer value.
C) an operating approach that is designed to analyze the activities of the organization.
D) an operating approach that is designed to compute variances between expectations and actual performance.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
34
The point at which technical and allocative efficiency are achieved is called __________ efficiency.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
35
The __________ is used by the lean control system to compare operational, capacity, and financial metrics.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
36
The difference between the total profit change and the profit-linked productivity change is
called the __________ component.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
37
A difference between Toyota's lean manufacturing system and Ford's lean enterprise system is

A) Toyota incorporated employee empowerment, team structure, cellular manufacturing, small batches, and reduced setup times as integral pieces of their system.
B) Toyota was not structured to deal with product variety.
C) Toyota valued process over employees.
D) Low volume products were not compatible with either system.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
38
In a lean environment, many overhead costs are assigned to products as directly __________ costs.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
39
Which of the following is NOT a characteristic of a lean manufacturing system?

A) delivery of the right product in the right quantity
B) zero defect
C) delivery of product the exact time a customer needs it
D) all of the above
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
40
An assessment of productive efficiency for all inputs combined is called __________ measurement.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
41
The new product value stream focuses on

A) developing new products for new customers.
B) providing current products to current customers.
C) providing current products to new customers and new products to new customers.
D) the production, sale, and delivery of products.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
42
The departments or cells which contain all the operations in close proximity that are needed to produce a family of products.

A) Manufacturing cells
B) Value stream cells
C) Batch departments
D) Plant departments
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
43
The processing department can produce one unit every 5 minutes and is the last department before the finishing department. Under traditional manufacturing where a batch equals 10 units, how long will it be before the first unit in the batch can move from the processing department to the finishing department?

A) 5 minutes
B) 50 minutes
C) 10 minutes
D) not enough information is given
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
44
In a demand-pull system

A) production is triggered by a forecast.
B) production is triggered by a customer order.
C) production is triggered by a vendor shipment.
D) production is triggered by an economic reorder point.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
45
Reducing the time it takes to configure equipment to produce a different product is an example of

A) cellular manufacturing.
B) batch processing.
C) reduced setup/changeover times.
D) value flow stream.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
46
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. Which area represents the bottleneck operation?</strong> A) finishing B) casting C) molding D) mixing There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. Which area represents the bottleneck operation?

A) finishing
B) casting
C) molding
D) mixing
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
47
To identify value streams using a two-dimensional matrix, the following two items must be utilized:

A) value indicators; costs
B) activities/processes; costs
C) quality indicators; products
D) activities/processes; products
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
48
Lean manufacturing shares many of the same methodologies as

A) activity-based management.
B) JIT manufacturing.
C) process costing.
D) none of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
49
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. How long does it take to produce a batch of 20 units under a traditional manufacturing approach?</strong> A) 380 minutes B) 415 minutes C) 35 minutes D) none of the above There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. How long does it take to produce a batch of 20 units under a traditional manufacturing approach?

A) 380 minutes
B) 415 minutes
C) 35 minutes
D) none of the above
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
50
The worth of one or more features of a product for which the customer is willing to pay is defined as:

A) Value
B) Quality
C) Efficiency
D) Innovation
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
51
The value stream

A) is made up of all activities, both value-added and non-value-added, required to bring a product group or service from its starting point to a finished product in the hands of the customer.
B) is made up value-added activities required to bring a product group or service from its starting point to a finished product in the hands of the customer.
C) is where the production stream is triggered by forecast.
D) is a series of steps designed to set target costs.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
52
Identification of a "value stream," pursuit of perfection, and making value flow without interruption are examples of

A) total quality management.
B) activity-based costing.
C) principles of lean thinking.
D) Kanban processing.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
53
There are two basic types of non-value added activities. They are

A) activities avoidable in the long run and activities unavoidable in the short run due to current technology or production methods.
B) activities avoidable in the short run and activities unavoidable in the long run due to current technology or production methods.
C) activities unavoidable in the short run due to current technology and activities avoidable due to production methods.
D) activities avoidable in the short run and activities unavoidable in the short run due to current technology or production methods.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
54
In a traditional manufacturing setup

A) there is significant move and wait time.
B) organization is by function into departments.
C) products are produced in large batches.
D) all of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
55
Figure 15-2 The following information relates to Cranmore Manufacturing:
To produce a unit of product:
<strong>Figure 15-2 The following information relates to Cranmore Manufacturing: To produce a unit of product:   There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes. Refer to Figure 15-2. What is the cycle time of operation?</strong> A) 60 minutes B) 20 minutes C) 35 minutes D) 16 minutes There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes.
Refer to Figure 15-2. What is the cycle time of operation?

A) 60 minutes
B) 20 minutes
C) 35 minutes
D) 16 minutes
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
56
Figure 15-2 The following information relates to Cranmore Manufacturing:
To produce a unit of product:
<strong>Figure 15-2 The following information relates to Cranmore Manufacturing: To produce a unit of product:   There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes. Refer to Figure 15-2. If Cranmore produces in batches of 10 units, how much time would have elapsed by the time the 10th unit is produced under a manufacturing cell environment (assuming the cell is processing continuously)?</strong> A) 60 minutes B) 65 minutes C) 150 minutes D) some other amount There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes.
Refer to Figure 15-2. If Cranmore produces in batches of 10 units, how much time would have elapsed by the time the 10th unit is produced under a manufacturing cell environment (assuming the cell is processing continuously)?

A) 60 minutes
B) 65 minutes
C) 150 minutes
D) some other amount
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
57
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. What is the production rate?</strong> A) 8.6 units per hour B) 7 units per hour C) 21 units per hour D) 19 units per hour There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. What is the production rate?

A) 8.6 units per hour
B) 7 units per hour
C) 21 units per hour
D) 19 units per hour
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
58
The order fulfillment value stream focuses on

A) developing new products for new customers.
B) providing current products to current customers.
C) providing current products to new customers and new products to new customers.
D) the production, sale, and delivery of products.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
59
Figure 15-1 The following information relates to Lancashire Manufacturing:
To produce a unit of product:
<strong>Figure 15-1 The following information relates to Lancashire Manufacturing: To produce a unit of product:   There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes. Refer to Figure 15-1. How long would it take to process the first unit of a 20-unit batch under a cellular manufacturing setup?</strong> A) 21 minutes B) 12 minutes C) 19 minutes D) 60 minutes There is a wait time of 8 minutes before the mixing department begins a batch, 5 minutes between the mixing and molding departments, a move and pre-wait between molding and casting of 10 minutes, and a move and pre-wait between the casting and finishing departments of 12 minutes.
Refer to Figure 15-1. How long would it take to process the first unit of a 20-unit batch under a cellular manufacturing setup?

A) 21 minutes
B) 12 minutes
C) 19 minutes
D) 60 minutes
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
60
The production rate

A) tells how many units of a product can be produced by the manufacturing cell.
B) calculates how many minutes it takes an operation to process one unit of product.
C) calculates the processing time of the slowest department.
D) calculates the wait and move time of a production.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
61
In calculating product costs for a value stream with multiple products, average product costs are a good estimate of individual product costs if

A) the products are similar and consume resources in approximately the same proportion.
B) the product mix is relatively stable.
C) the products are homogenous.
D) all of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
62
Emphasis on departmental efficiency

A) causes bottleneck departments to over-produce and build work-in-process inventories.
B) causes stock outs related to demand-pull systems.
C) is a critical component of a lean accounting system.
D) none of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
63
Which of the following is NOT considered a major source of waste?

A) waiting
B) joint products
C) overproduction of goods not needed
D) defective products
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
64
Which of the following is true in regards to a lean accounting system?

A) The cost of people with specialized skills, such as industrial engineers, are allocated to all manufacturing cells based on an activity driver.
B) Workers are multiskilled and responsible for setting up equipment, maintaining equipment, and operating equipment.
C) Implementing a value stream system will require more workers.
D) Workers are highly skilled in one specialized area or activity and are not expected to spend time on other value-added activities.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
65
The pursuit of perfection is realized in

A) zero setup times.
B) producing on demand.
C) maximizing customer value.
D) all of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
66
Figure 15-2 The following information relates to Cranmore Manufacturing:
To produce a unit of product:
<strong>Figure 15-2 The following information relates to Cranmore Manufacturing: To produce a unit of product:   There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes. Refer to Figure 16-2. What is the production rate?</strong> A) 12 units per hour B) 20 units per hour C) 15 units per hour D) 7.5 units per hour There is a wait time of 5 minutes before the cutting department begins a batch, 15 minutes between the cutting and welding departments, a move and pre-wait between welding and polishing of 12 minutes, and a move and pre-wait between the polishing and finishing departments of 8 minutes.
Refer to Figure 16-2. What is the production rate?

A) 12 units per hour
B) 20 units per hour
C) 15 units per hour
D) 7.5 units per hour
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
67
Figure 15 - 3 Based on the following information:
<strong>Figure 15 - 3 Based on the following information:   Refer to Figure 15-3. What is the product cost based on total average conversion cost? (Round to nearest cent.)</strong> A) $100.56 B) $48.32 C) $36.04 D) $50.78 Refer to Figure 15-3. What is the product cost based on total average conversion cost? (Round to nearest cent.)

A) $100.56
B) $48.32
C) $36.04
D) $50.78
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
68
In a lean environment, many overhead costs are assigned to

A) products using driver tracing.
B) products as directly traceable costs.
C) products using allocation methods.
D) costs using plantwide overhead rates.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
69
The document used by the lean control system that compares operational, capacity, and financial metrics with prior week performances and with a future desired state is called:

A) balanced scorecard
B) profit analysis worksheet
C) box scorecard
D) performance improvement plan
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
70
If a facility has costs of $100,000 per year and 20,000 square feet, and if 19,000 square feet are absorbed by the value streams, what happens to the unabsorbed cost of the remaining 1,000 feet?

A) allocated to all the value streams based on proportionate square foot usage
B) assigned to all value streams equally
C) absorbed by the largest value stream
D) deducted from revenue as a separate item
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
71
In the calculation of product costs for value streams with multiple products, units shipped instead of units produced is used as the denominator because

A) it reduces conversion costs assigned to the value stream.
B) it motivates managers to reduce inventories.
C) units shipped are always greater than units produced.
D) units shipped is not used.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
72
The only allocation used regularly in a value stream cost assignment is

A) facilities.
B) depreciation.
C) maintenance.
D) setup costs.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
73
Which of the following is NOT considered a major source of waste?

A) costs spent on defect detection
B) unnecessary movement of goods
C) unnecessary transport of goods
D) design of goods and services that don't meet the needs of the customer
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
74
Which of the following is a reason traditional costing approaches may NOT work in a lean manufacturing environment?

A) Standard costing variances encourage overproduction.
B) Distorted product costs may conceal the outcome of success of a lean system.
C) Traditional operational controls work against demand-pull systems.
D) all of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
75
With multiple products in a value stream, unit cost will increase if

A) more units are shipped than produced.
B) more units are produced than shipped.
C) average conversion cost is used instead of total average cost.
D) none of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
76
Figure 15 - 3 Based on the following information:
<strong>Figure 15 - 3 Based on the following information:   Refer to Figure 15-3. What is the product cost based on total average cost? (Round to nearest cent.)</strong> A) $54.05 B) $42.59 C) $48.32 D) $93.37 Refer to Figure 15-3. What is the product cost based on total average cost? (Round to nearest cent.)

A) $54.05
B) $42.59
C) $48.32
D) $93.37
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
77
Why might labor costs be reduced in a value stream system?

A) The elimination of the need for any specialized skilled employees such as industrial engineers or production schedulers.
B) The labor costs of industrial engineers and production schedulers can be pooled and allocated to the value streams.
C) Some of the workers can be cross-trained to perform value-added activities within the value stream.
D) none of the above.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
78
The JIT solution

A) requires carrying materials inventory in order to lower the cost of inventory without production delays.
B) requires selection of vendors based on lowest cost alone.
C) exploits supplier linkages by negotiating long-term contracts with a few chosen suppliers located closest to the production facility and establishing more supplier involvement.
D) requires a solid forecast to push production.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
79
Which of the following is NOT a limitation of a value stream cost assignment?

A) Initially, it may not be possible to allocate all the people needed in a value stream to that stream exclusively.
B) There will always be some individuals whose related costs will remain outside of any particular value stream.
C) A value stream is usually organized around a family of products.
D) Having a value stream for each product is not practical.
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
80
What is the usual formula for calculating product costs for value streams with multiple products?

A) total value stream cost of period / units shipped for period
B) budgeted value stream cost of period / units shipped for period
C) total value stream cost of period / units sold for period
D) budgeted value stream cost of period / forecasted units shipped for period
Unlock Deck
Unlock for access to all 172 flashcards in this deck.
Unlock Deck
k this deck
locked card icon
Unlock Deck
Unlock for access to all 172 flashcards in this deck.