Deck 4: Capacitance

Full screen (f)
exit full mode
Question
<strong>  In which of these configurations is (are) the electric field(s) uniform?</strong> A) 1 B) 2 C) 3 D) 1 and 3 E) 1, 2, and 3 <div style=padding-top: 35px> In which of these configurations is (are) the electric field(s) uniform?

A) 1
B) 2
C) 3
D) 1 and 3
E) 1, 2, and 3
Use Space or
up arrow
down arrow
to flip the card.
Question
<strong>  Two flat parallel plates are d = 0.40 cm apart. The potential difference between the plates is 360 V. The electric field at the point P at the center is approximately</strong> A) 90 kN/C B) 3.6 kN/C C) 0.9 kN/C D) zero E) 3.6 *10<sup>5</sup> N/C <div style=padding-top: 35px> Two flat parallel plates are d = 0.40 cm apart. The potential difference between the plates is 360 V. The electric field at the point P at the center is approximately

A) 90 kN/C
B) 3.6 kN/C
C) 0.9 kN/C
D) zero
E) 3.6 *105 N/C
Question
Which of the following statements about parallel plate capacitor is false?

A) The two plates have equal charges.
B) The capacitor store charges on the plates.
C) The capacitance is proportional to the area.
D) The capacitance is inversely proportional to the separation between the plates.
E) A charged capacitor stores energy.
Question
A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.

A) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor. <div style=padding-top: 35px>
B) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor. <div style=padding-top: 35px>
C) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor. <div style=padding-top: 35px>
D) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor. <div style=padding-top: 35px>
E) It is not possible to construct such a capacitor.
Question
Two large metallic plates are parallel to each other and charged. The distance between the plates is d. The potential difference between the plates is V. The magnitude of the electric field <strong>Two large metallic plates are parallel to each other and charged. The distance between the plates is d. The potential difference between the plates is V. The magnitude of the electric field   in the region between the plates and away from the edges is given by</strong> A) d/V B) V<sup>2</sup>/d C) dV D) V/d<sup>2 </sup> E) None of these is correct. <div style=padding-top: 35px> in the region between the plates and away from the edges is given by

A) d/V
B) V2/d
C) dV
D) V/d2
E) None of these is correct.
Question
If the area of the plates of a parallel plate capacitor is halved and the separation between the plates tripled, then by what factor does the capacitance change?

A) increase by a factor of 6
B) decrease by a factor of 2/3
C) decrease by a factor of 1/6
D) increase by a factor of 3/2
E) decrease by a factor of 1/2
Question
If a capacitor of capacitance 2.0 µF is given a charge of 1.0 mC, the potential difference across the capacitor is

A) 0.50 kV
B) 2.0 V
C) 2.0 µV
D) 0.50 V
E) None of these is correct.
Question
If the area of the plates of a parallel-plate capacitor is doubled, the capacitance is

A) not changed.
B) doubled.
C) halved.
D) increased by a factor of 4.
E) decreased by a factor of 1/4.
Question
A coaxial cable consists of a wire of radius 0.30 mm and an outer conducting shell of radius 1.0 mm. Its capacitance for a 2 m length of the cable is approximately

A) 0.22 nF
B) 34 nF
C) 46 pF
D) 92 pF
E) 184 pF
Question
Which of the following statements is false?

A) In the process of charging a capacitor, an electric field is produced between its plates.
B) The work required to charge a capacitor can be thought of as the work required to create the electric field between its plates.
C) The energy density in the space between the plates of a capacitor is directly proportional to the first power of the electric field.
D) The potential difference between the plates of a capacitor is directly proportional to the electric field.
E) All of these are true.
Question
A parallel-plate capacitor has square plates of side 8.0 cm separated by 0.80 mm. If you charge this capacitor to 15 V, the amount of charge transferred from one plate to the other is

A) 71 nC
B) 7.1 nC
C) 1.1 pC
D) 1.1 nC
E) 7.1 pC
Question
You want to store 1010 excess electrons on the negative plate of a capacitor at 9.0 V. How large a capacitance must you use?

A) 0.014 µF
B) 0.18 µF
C) 0.18 nF
D) 14 pF
E) 5.6 pF
Question
If you increase the charge on a parallel-plate capacitor from 3 µC to 9 µC and increase the plate separation from 1 mm to 3 mm, the energy stored in the capacitor changes by a factor of

A) 27
B) 9
C) 3
D) 8
E) 1/3
Question
A coaxial cable consists of a wire of radius 0.30 mm and an outer conducting shell of radius 1.0 mm. Its capacitance per unit length is approximately

A) 17 nF/m
B) 0.11 nF/m
C) 92 pF/m
D) 23 pF/m
E) 46 pF/m
Question
You make a homemade capacitor out of two flat circular metal plates, each of radius
5 cm, and hold them a distance of 1 cm apart. You then connect each plate to the terminals of a 6-V battery. What would be the capacitance of your capacitor?

A) 7.0 * 10-12 F
B) 2.2 * 10-11 F
C) 2.2 * 10-12 F
D) 2.2 * 10-10 F
E) 7.0 * 10-10 F
Question
A capacitor of capacitance C holds a charge Q when the potential difference across the plates is V. If the charge Q on the plates is doubled to 2Q,

A) the capacitance becomes (1/2)V.
B) the capacitance becomes 2C.
C) the potential changes to (1/2)V.
D) the potential changes to 2V.
E) the potential does not change.
Question
Doubling the potential difference across a capacitor

A) doubles its capacitance.
B) halves its capacitance.
C) quadruples the charge stored on the capacitor.
D) halves the charge stored on the capacitor.
E) does not change the capacitance of the capacitor.
Question
An 80-nF capacitor is charged to a potential of 500 V. How much charge accumulates on each plate of the capacitor?

A) 4.0 * 10-4 C
B) 4.0 *10-5 C
C) 4.0 *10-10 C
D) 1.6 *10-10 C
E) 1.6 * 10-7 C
Question
Doubling the potential difference across a capacitor

A) doubles its capacitance.
B) halves its capacitance.
C) quadruples the charge stored on the capacitor.
D) doubles the charge stored on the capacitor.
E) produces none of the above results.
Question
<strong>  As the voltage in the circuit is increased (but not to the breakdown voltage), the capacitance</strong> A) increases. B) decreases. C) does not change. D) increases, decreases, or does not change, depending on the charge on the plates of the capacitor. E) does none of these. <div style=padding-top: 35px> As the voltage in the circuit is increased (but not to the breakdown voltage), the capacitance

A) increases.
B) decreases.
C) does not change.
D) increases, decreases, or does not change, depending on the charge on the plates of the capacitor.
E) does none of these.
Question
If the potential difference of a capacitor is reduced by one-half, the energy stored in that capacitor is

A) reduced to one-half.
B) reduced to one-quarter.
C) increased by a factor of 2.
D) increased by a factor of 4.
E) not changed.
Question
The charge on each capacitor in a set of capacitors in parallel is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Question
Use the following figure to answer the next five problems: <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram below. If the potential difference between A and B is 24.5 V, what is the total energy stored in this system of capacitors if C<sub>1</sub> = 5.0 µF, C<sub>2</sub> = 4.0 µF, and C<sub>3</sub> = 3.0 µF?</strong> A) 1.7 * 10<sup>-4</sup> J B) 1.5 *10<sup>-4</sup> J C) 2.2 *10<sup>-5</sup> J D) 6.8 * 10<sup>-4</sup> J E) 4.0 * 10<sup>-4</sup> J <div style=padding-top: 35px>

-You connect three capacitors as shown in the diagram below. If the potential difference between A and B is 24.5 V, what is the total energy stored in this system of capacitors if C1 = 5.0 µF, C2 = 4.0 µF, and C3 = 3.0 µF?

A) 1.7 * 10-4 J
B) 1.5 *10-4 J
C) 2.2 *10-5 J
D) 6.8 * 10-4 J
E) 4.0 * 10-4 J
Question
A coaxial cable consists of a wire of radius 1.0 mm and an outer conducting shell of radius 8 mm. A 20 V potential difference is applied between the wire and the shell. What is the energy stored per meter of the cable?

A) 5.35 nJ/m
B) 10.7 nJ/m
C) 2.67 nJ/m
D) 61.6 pJ/m
E) 123 pJ/m
Question
Use the following figure to answer the next five problems:  <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram. C<sub>1</sub> = C<sub>3</sub> = 2.5  \mu F, and C<sub>2</sub> = 5.0  \mu F. A potential difference of 9.0 V is maintained between the terminals A and B. The magnitude of the charge on capacitor C<sub>3</sub> is approximately</strong> A) 4.2  \mu C B) 4.8  \mu C C) 17  \mu C D) 37  \mu C E) 90  \mu C <div style=padding-top: 35px>

-You connect three capacitors as shown in the diagram. C1 = C3 = 2.5 μ\mu F, and
C2 = 5.0 μ\mu F. A potential difference of 9.0 V is maintained between the terminals A and B. The magnitude of the charge on capacitor C3 is approximately

A) 4.2 μ\mu C
B) 4.8 μ\mu C
C) 17 μ\mu C
D) 37 μ\mu C
E) 90 μ\mu C
Question
If the area of the plates of a parallel plate capacitor is halved and the separation between the plates tripled, while the charge on the capacitor remains constant, then by what factor does the energy stored in the capacitor change?

A) increase by a factor of 2
B) decrease by a factor of 2/3
C) increase by a factor of 6
D) increase by a factor of 3/2
E) decrease by a factor of 1/6
Question
The voltage across each capacitor in a set of capacitors in parallel is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Question
If 20 capacitors, each of 100 μ\mu F, were connected in parallel across a 12-V battery, what would be the total energy stored in the capacitors?

A) 2.9 * 10-1 J
B) 7.2 * 10-3 J
C) 1.2 * 10-2 J
D) 1.4 *10-1 J
E) 3.6 * 10-4 J
Question
You attach a 30-pF capacitor across a 1.5-V battery. How much energy is stored in the capacitor?

A) 3.4 * 10-11 J
B) 4.5 * 10-11 J
C) 6.7 * 10-11 J
D) 3.4 * 10-8 J
E) 4.5 * 10-8 J
Question
Use the following figure to answer the next five problems:  <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram. C<sub>1</sub> = 5.0  \mu F, C<sub>2</sub> = 4.0  \mu F, and C<sub>3</sub> = 3.0  \mu F. If you apply 12 V between points A and B, the energy stored in C<sub>3</sub> will be approximately</strong> A) 0.16 mJ B) 41  \mu J C) 0.12 mJ D) 0.41 mJ E) 16 mF <div style=padding-top: 35px>

-You connect three capacitors as shown in the diagram. C1 = 5.0 μ\mu F, C2 = 4.0 μ\mu F, and
C3 = 3.0 μ\mu F. If you apply 12 V between points A and B, the energy stored in C3 will be approximately

A) 0.16 mJ
B) 41 μ\mu J
C) 0.12 mJ
D) 0.41 mJ
E) 16 mF
Question
A coaxial cable has the inner wire of radius a = 1 mm and the outside shield of radius
B = 8 mm. The electric field strength between the wire and the shield is given by  <strong>A coaxial cable has the inner wire of radius a = 1 mm and the outside shield of radius B = 8 mm. The electric field strength between the wire and the shield is given by   . The electrostatic energy per meter of the cable is</strong> A) 0.328 nJ B) 6.69  \mu J C) 3.34  \mu J D) 14.5  \mu J E) zero <div style=padding-top: 35px>  . The electrostatic energy per meter of the cable is

A) 0.328 nJ
B) 6.69 μ\mu J
C) 3.34 μ\mu J
D) 14.5 μ\mu J
E) zero
Question
You charge a 4.0-µF capacitor to 150 V. How much additional energy must you add to charge it to 300 V?

A) 0.60 mJ
B) 0.14 J
C) 18 µJ
D) 0.30 mJ
E) 0.28 J
Question
The energy stored in a capacitor is directly proportional to

A) the voltage across the capacitor.
B) the charge on the capacitor.
C) the reciprocal of the charge on the capacitor.
D) the square of the voltage across the capacitor.
E) None of these is correct.
Question
A parallel plate capacitor is constructed using two square metal sheets, each of side
L = 10 cm. The plates are separated by a distance d = 2 mm and a voltage applied between the plates. The electric field strength within the plates is E = 4000 V/m. The energy stored in the capacitor is

A) 0.71 nJ
B) 1.42 nJ
C) 2.83 nJ
D) 3.67 nJ
E) zero
Question
You connect three capacitors as shown in the diagram. C1 = C3 = 2.5 μ\mu F, and
C2 = 5.0 μ\mu F. A potential difference of 9.0 V is maintained between the terminals A and B. The voltage across on capacitor C3 is approximately

A) 1.2 V
B) 7.9 V
C) 3.2 V
D) 5.4 V
E) 6.8 V
Question
A coaxial cable consists of a wire of radius 1.0 mm and an outer conducting shell of radius 8 mm. A 20 V potential difference is applied between the wire and the shell. What is the energy stored in a 2 m length of the cable?

A) 5.35 nJ
B) 10.7 nJ
C) 2.67 nJ
D) 61.6 pJ
E) 123 pJ
Question
A 2.0-µF capacitor has a potential difference of 5000 V. The work done in charging it was

A) 2.5 J
B) 5.0 J
C) 25 J
D) 5.0 mJ
E) 0.50 kJ
Question
Use the following figure to answer the next five problems:  <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram below. The effective capacitance of this combination when C<sub>1</sub> = 5.0 \mu F, C<sub>2</sub> = 4.0  \mu F, and C<sub>3</sub> = 3.0  \mu F is approximately</strong> A) 0.44  \mu F B) 2.3  \mu F C) 3.5  \mu F D) 5.2  \mu F E) 12  \mu F <div style=padding-top: 35px>

-You connect three capacitors as shown in the diagram below. The effective capacitance of this combination when C1 = 5.0 μ\mu F, C2 = 4.0 μ\mu F, and C3 = 3.0 μ\mu F is approximately

A) 0.44 μ\mu F
B) 2.3 μ\mu F
C) 3.5 μ\mu F
D) 5.2 μ\mu F
E) 12 μ\mu F
Question
A cardiac defibrillator can be used to help an erratic heartbeat in a regular fashion. A defibrillator contains a capacitor charged to a voltage of 6000 V with an energy storage of 200 J. Calculate the capacitance of the capacitor.

A) 6.67 * 10-2 F
B) 1.11 *10-5 F
C) 5.56 *10-6 F
D) 2.22 * 10-5 F
E) 13.3 F
Question
If you decrease the charge on a parallel-plate capacitor from 12 µC to 4 µC and increase the plate separation from 1 mm to 3 mm, the energy stored in the capacitor changes by a factor of

A) 27
B) 1/3
C) 3
D) 8
E) 1/4
Question
A capacitor, C1 = 5.0 μ\mu F, is charged up to 8 V. It is then connected to a second uncharged capacitor C2 = 2.5 μ\mu F. The charge on C1 after the system has come to equilibrium is

A) 26.7 μ\mu C
B) 13.3 μ\mu C
C) 20.0 μ\mu C
D) 40.0 μ\mu C
E) 6.67 μ\mu C
Question
When you insert a piece of paper ( κ\kappa = 3.7) into the air between the plates of a capacitor, the capacitance

A) increases.
B) decreases.
C) does not change.
D) could increase, decrease, or not change depending on the dielectric constant of the paper.
E) does none of these.
Question
You connect two capacitors C1 = 15 pF and C2 = 30 pF in series across a 1.5-V battery. The potential difference across capacitor C1 is approximately

A) 0.50 V
B) 1.0 V
C) 1.5 V
D) 0.33 V
E) 0.67 V
Question
The equivalent capacitance of two capacitors in series is

A) the sum of their capacitances.
B) the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the capacitances.
E) described by none of the above.
Question
A capacitor, C1 = 5.0 μ\mu F, is charged up to 8 V. It is then connected to a second uncharged capacitor C2 = 2.5 μ\mu F. The voltage across the capacitor C1 after the system has come to equilibrium is

A) 2.67 V
B) 4.0 V
C) 5.33 V
D) 8.0 V
E) 12.0 V
Question
A 1.0- μ\mu F capacitor and a 2.0- μ\mu F capacitor are connected in series across a 1200-V source. The charge on each capacitor is

A) 0.40 mC
B) 0.80 mC
C) 1.2 mC
D) 1.8 mC
E) 3.6 mC
Question
<strong>  If C<sub>1</sub> < C<sub>2</sub> < C<sub>3</sub> < C<sub>4</sub> for the combination of capacitors shown, the equivalent capacitance</strong> A) is less than C<sub>1</sub>. B) is more than C<sub>4</sub>. C) is between C<sub>2</sub> and C<sub>3</sub>. D) is more than C<sub>2</sub>. E) could be any value depending on the applied voltage. <div style=padding-top: 35px> If C1 < C2 < C3 < C4 for the combination of capacitors shown, the equivalent capacitance

A) is less than C1.
B) is more than C4.
C) is between C2 and C3.
D) is more than C2.
E) could be any value depending on the applied voltage.
Question
The equivalent capacitance of three capacitors in series is

A) the sum of their capacitances.
B) the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the capacitances.
E) described by none of the above.
Question
The equivalent capacitance of two capacitors in parallel is

A) the sum of the reciprocals of their capacitances.
B) the reciprocal of the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the two capacitances.
E) described by none of the above.
Question
The charge on each capacitor in a set of capacitors in series is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Question
The voltage across each capacitor in a set of capacitors in series is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Question
The equivalent capacitance of three capacitors in parallel is

A) the sum of the reciprocals of their capacitances.
B) the reciprocal of the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the two capacitances.
E) described by none of the above.
Question
 <strong>  If all the four capacitors have equal values of 50  \mu F then calculate the equivalent capacitance of the circuit shown above.</strong> A) 50  \mu F B) 30  \mu F C) 75  \mu F D) 100  \mu F E) 83  \mu F <div style=padding-top: 35px>  If all the four capacitors have equal values of 50 μ\mu F then calculate the equivalent capacitance of the circuit shown above.

A) 50 μ\mu F
B) 30 μ\mu F
C) 75 μ\mu F
D) 100 μ\mu F
E) 83 μ\mu F
Question
A capacitor, C1 = 5.0 μ\mu F, is charged up to 8 V. It is then connected to a second uncharged capacitor C2 = 2.5 μ\mu F. The charge on C2 after the system has come to equilibrium is

A) 26.7 μ\mu C
B) 13.3 μ\mu C
C) 20.0 μ\mu C
D) 40.0 μ\mu C
E) 6.67 μ\mu C
Question
You connect two 12- μ\mu F capacitors and a 6- μ\mu F capacitor in parallel. The equivalent capacitance of the combination is

A) 18 μ\mu F
B) 4 μ\mu F
C) 3 μ\mu F
D) 30 μ\mu F
E) None of these is correct.
Question
The capacitance of a parallel-plate capacitor

A) is defined as the amount of work required to move a charge from one plate to the other.
B) decreases if a dielectric is placed between its plates.
C) is independent of the distance between the plates.
D) has units of J/C.
E) is independent of the charge on the capacitor.
Question
A capacitor is made with two strips of metal foil, each 2.5 cm wide by 50 cm long, with a 0.70- μ\mu m thick strip of paper ( κ\kappa = 3.7) sandwiched between them. The capacitor is rolled up to save space. What is the capacitance of this device? (The permittivity of free space ϵ\epsilon 0 = 8.85 *10-12 F/m.)

A) 43 nF
B) 0.16 μ\mu F
C) 0.58 μ\mu F
D) 2.0 μ\mu F
E) 7.3 μ\mu F
Question
<strong>  If C<sub>1</sub> < C<sub>2</sub> < C<sub>3</sub> < C<sub>4</sub> for the combination of capacitors shown, the equivalent capacitance</strong> A) is less than C<sub>1</sub>. B) is more than C<sub>4</sub>. C) is between C<sub>2</sub> and C<sub>3</sub>. D) is less than C<sub>2</sub>. E) could be any value depending on the applied voltage. <div style=padding-top: 35px> If C1 < C2 < C3 < C4 for the combination of capacitors shown, the equivalent capacitance

A) is less than C1.
B) is more than C4.
C) is between C2 and C3.
D) is less than C2.
E) could be any value depending on the applied voltage.
Question
Three capacitors 2 μ\mu F, 4 μ\mu F and 8 μ\mu F are connected in parallel across a 120-V source. The charge on the 4 μ\mu F capacitor is

A) 2.4 * 10-4 C
B) 9.6 * 10-4 C
C) 2.1 * 103 C
D) 1.7 * 10-3 C
E) 4.8 * 10-4 C
Question
<strong>  You want to use three capacitors in a circuit. If each capacitor has a capacitance of 3 pF, the configuration that gives you an equivalent capacitance of 2 pF between points x and y is</strong> A) 1 B) 2 C) 3 D) 4 E) None of these is correct. <div style=padding-top: 35px> You want to use three capacitors in a circuit. If each capacitor has a capacitance of 3 pF, the configuration that gives you an equivalent capacitance of 2 pF between points x and y is

A) 1
B) 2
C) 3
D) 4
E) None of these is correct.
Question
<strong>  A capacitor is connected to a battery as shown. When a dielectric is inserted between the plates of the capacitor,</strong> A) only the capacitance changes. B) only the voltage across the capacitor changes. C) only the charge on the capacitor changes. D) both the capacitance and the voltage change. E) both the capacitance and the charge change. <div style=padding-top: 35px> A capacitor is connected to a battery as shown. When a dielectric is inserted between the plates of the capacitor,

A) only the capacitance changes.
B) only the voltage across the capacitor changes.
C) only the charge on the capacitor changes.
D) both the capacitance and the voltage change.
E) both the capacitance and the charge change.
Question
A parallel-plate capacitor has square plates of side 12 cm and a separation of 6.0 mm. A dielectric slab of constant κ\kappa = 2.0 has the same area as the plates but has a thickness of 3.0 mm. What is the capacitance of this capacitor with the dielectric slab between its plates?

A) 28 pF
B) 21 pF
C) 16 pF
D) 37 pF
E) 53 pF
Question
The space between the inner wire of radius a = 1 mm of a co-axial cable and the conducting shield of radius b = 8 mm is made of nylon ( κ\kappa = 4.2). A potential difference of 20 V is maintained between the wire and the shield. The energy stored per meter of the cable is

A) 1.12 nJ/m
B) 22.5 nJ/m
C) 44.9 nJ/m
D) 5.36 nJ/m
E) 2.68 nJ/m
Question
A parallel plate capacitor has a plate spacing of 1.5 mm, which is filled with a dielectric of κ\kappa = 4.3, and its capacitance is 80 μ\mu F. If the dielectric is taken out and the plate spacing doubled, then what is the new capacitance?

A) 690 μ\mu F
B) 37 μ\mu F
C) 9.3 μ\mu F
D) 170 μ\mu F
E) 19 μ\mu F
Question
If a dielectric is inserted between the plates of a parallel-plate capacitor that is connected to a 100-V battery, the

A) voltage across the capacitor decreases.
B) electric field between the plates decreases.
C) electric field between the plates increases.
D) charge on the capacitor plates decreases.
E) charge on the capacitor plates increases.
Question
 <strong>  Two identical capacitors A and B are connected across a battery, as shown. If mica ( \kappa  = 5.4) is inserted in B,</strong> A) both capacitors will retain the same charge. B) B will have the larger charge. C) A will have the larger charge. D) the potential difference across B will increase. E) the potential difference across A will increase. <div style=padding-top: 35px>  Two identical capacitors A and B are connected across a battery, as shown. If mica ( κ\kappa = 5.4) is inserted in B,

A) both capacitors will retain the same charge.
B) B will have the larger charge.
C) A will have the larger charge.
D) the potential difference across B will increase.
E) the potential difference across A will increase.
Question
The capacitance of a parallel-plate capacitor is 24 μ\mu F when the plates are separated by a material of dielectric constant 2.0. If this material is removed, leaving air between the plates, and the separation between the plates is tripled, the capacitance is

A) unchanged
B) 16 μ\mu F
C) 36 F μ\mu F
D) 0.14 mF
E) 4.0 μ\mu F
Question
A potential of 12 V is applied across a parallel-plate capacitor which is constructed of square plates of side 10 cm and separation of 4.0 mm. A dielectric slab of constant
κ\kappa = 2.5 is inserted between the plates so that it completely fills the space. What is the bound surface charge density on the dielectric?

A) 12.3 pC/m2
B) 15.9 pC/m2
C) 39.8 pC/m2
D) 56.8 pC/m2
E) 85.4 pC/m2
Question
 <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  A charged capacitor has an initial electric field  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  0 and potential difference V0 across its plates. Without connecting any source of emf, you insert a dielectric ( κ\kappa > 1) slab between the plates to produce an electric field  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  d and a potential difference Vd across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is

A)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  d >  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  0; Vd > V0
B)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  d =  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  0; Vd > V0
C)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  d >  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  0; Vd = V0
D)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  d <  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  0; Vd > V0
E)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  d <  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub> <div style=padding-top: 35px>  0; Vd < V0
Question
Two parallel plate air capacitors, each of capacitance X F are in series with a battery of 12-V. If a dielectric with κ\kappa = 3 is inserted between the plates of one of the capacitors, then calculate the change in electrical charge (in Coulombs) that occurs on one of its plates.

A) 9X
B) 3X/4
C) 3X
D) 16X
E) none of the above
Question
The space between the inner wire of radius a = 1 mm of a co-axial cable and the conducting shield of radius b = 8 mm is made of nylon ( κ\kappa = 4.2). The capacitance per meter is

A) 13.4 pF
B) 26.8 pF
C) 35.8 pF
D) 56.2 pF
E) 112 pF
Question
A parallel plate capacitor of area A = 30 cm2 and separation d = 5 mm is charged by a battery of 60-V. If the air between the plates is replaced by a dielectric of κ\kappa = 4 with the battery still connected, then what is the ratio of the initial charge on the plates divided by the final charge on the plates?

A) 4.3
B) 1
C) 16
D) 0.25
E) 4.0
Question
An electric field, E, is applied to a dielectric. Which of the following statements is true?

A) The electric field within the dielectric is less than E.
B) The dielectric produces an electric field in the opposite direction to E.
C) The molecules in the dielectric become polarized.
D) The electric field will produce a torque on molecules in dielectrics which have permanent dipoles.
E) All the above statements are true.
Unlock Deck
Sign up to unlock the cards in this deck!
Unlock Deck
Unlock Deck
1/73
auto play flashcards
Play
simple tutorial
Full screen (f)
exit full mode
Deck 4: Capacitance
1
<strong>  In which of these configurations is (are) the electric field(s) uniform?</strong> A) 1 B) 2 C) 3 D) 1 and 3 E) 1, 2, and 3 In which of these configurations is (are) the electric field(s) uniform?

A) 1
B) 2
C) 3
D) 1 and 3
E) 1, 2, and 3
1
2
<strong>  Two flat parallel plates are d = 0.40 cm apart. The potential difference between the plates is 360 V. The electric field at the point P at the center is approximately</strong> A) 90 kN/C B) 3.6 kN/C C) 0.9 kN/C D) zero E) 3.6 *10<sup>5</sup> N/C Two flat parallel plates are d = 0.40 cm apart. The potential difference between the plates is 360 V. The electric field at the point P at the center is approximately

A) 90 kN/C
B) 3.6 kN/C
C) 0.9 kN/C
D) zero
E) 3.6 *105 N/C
90 kN/C
3
Which of the following statements about parallel plate capacitor is false?

A) The two plates have equal charges.
B) The capacitor store charges on the plates.
C) The capacitance is proportional to the area.
D) The capacitance is inversely proportional to the separation between the plates.
E) A charged capacitor stores energy.
The two plates have equal charges.
4
A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.

A) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor.
B) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor.
C) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor.
D) <strong>A capacitor is constructed by placing a conducting sphere of radius a concentrically inside a thin conducting spherical shell of radius b. Derive an expression for the capacitance of such a capacitor.</strong> A)   B)   C)   D)   E) It is not possible to construct such a capacitor.
E) It is not possible to construct such a capacitor.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
5
Two large metallic plates are parallel to each other and charged. The distance between the plates is d. The potential difference between the plates is V. The magnitude of the electric field <strong>Two large metallic plates are parallel to each other and charged. The distance between the plates is d. The potential difference between the plates is V. The magnitude of the electric field   in the region between the plates and away from the edges is given by</strong> A) d/V B) V<sup>2</sup>/d C) dV D) V/d<sup>2 </sup> E) None of these is correct. in the region between the plates and away from the edges is given by

A) d/V
B) V2/d
C) dV
D) V/d2
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
6
If the area of the plates of a parallel plate capacitor is halved and the separation between the plates tripled, then by what factor does the capacitance change?

A) increase by a factor of 6
B) decrease by a factor of 2/3
C) decrease by a factor of 1/6
D) increase by a factor of 3/2
E) decrease by a factor of 1/2
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
7
If a capacitor of capacitance 2.0 µF is given a charge of 1.0 mC, the potential difference across the capacitor is

A) 0.50 kV
B) 2.0 V
C) 2.0 µV
D) 0.50 V
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
8
If the area of the plates of a parallel-plate capacitor is doubled, the capacitance is

A) not changed.
B) doubled.
C) halved.
D) increased by a factor of 4.
E) decreased by a factor of 1/4.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
9
A coaxial cable consists of a wire of radius 0.30 mm and an outer conducting shell of radius 1.0 mm. Its capacitance for a 2 m length of the cable is approximately

A) 0.22 nF
B) 34 nF
C) 46 pF
D) 92 pF
E) 184 pF
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
10
Which of the following statements is false?

A) In the process of charging a capacitor, an electric field is produced between its plates.
B) The work required to charge a capacitor can be thought of as the work required to create the electric field between its plates.
C) The energy density in the space between the plates of a capacitor is directly proportional to the first power of the electric field.
D) The potential difference between the plates of a capacitor is directly proportional to the electric field.
E) All of these are true.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
11
A parallel-plate capacitor has square plates of side 8.0 cm separated by 0.80 mm. If you charge this capacitor to 15 V, the amount of charge transferred from one plate to the other is

A) 71 nC
B) 7.1 nC
C) 1.1 pC
D) 1.1 nC
E) 7.1 pC
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
12
You want to store 1010 excess electrons on the negative plate of a capacitor at 9.0 V. How large a capacitance must you use?

A) 0.014 µF
B) 0.18 µF
C) 0.18 nF
D) 14 pF
E) 5.6 pF
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
13
If you increase the charge on a parallel-plate capacitor from 3 µC to 9 µC and increase the plate separation from 1 mm to 3 mm, the energy stored in the capacitor changes by a factor of

A) 27
B) 9
C) 3
D) 8
E) 1/3
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
14
A coaxial cable consists of a wire of radius 0.30 mm and an outer conducting shell of radius 1.0 mm. Its capacitance per unit length is approximately

A) 17 nF/m
B) 0.11 nF/m
C) 92 pF/m
D) 23 pF/m
E) 46 pF/m
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
15
You make a homemade capacitor out of two flat circular metal plates, each of radius
5 cm, and hold them a distance of 1 cm apart. You then connect each plate to the terminals of a 6-V battery. What would be the capacitance of your capacitor?

A) 7.0 * 10-12 F
B) 2.2 * 10-11 F
C) 2.2 * 10-12 F
D) 2.2 * 10-10 F
E) 7.0 * 10-10 F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
16
A capacitor of capacitance C holds a charge Q when the potential difference across the plates is V. If the charge Q on the plates is doubled to 2Q,

A) the capacitance becomes (1/2)V.
B) the capacitance becomes 2C.
C) the potential changes to (1/2)V.
D) the potential changes to 2V.
E) the potential does not change.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
17
Doubling the potential difference across a capacitor

A) doubles its capacitance.
B) halves its capacitance.
C) quadruples the charge stored on the capacitor.
D) halves the charge stored on the capacitor.
E) does not change the capacitance of the capacitor.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
18
An 80-nF capacitor is charged to a potential of 500 V. How much charge accumulates on each plate of the capacitor?

A) 4.0 * 10-4 C
B) 4.0 *10-5 C
C) 4.0 *10-10 C
D) 1.6 *10-10 C
E) 1.6 * 10-7 C
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
19
Doubling the potential difference across a capacitor

A) doubles its capacitance.
B) halves its capacitance.
C) quadruples the charge stored on the capacitor.
D) doubles the charge stored on the capacitor.
E) produces none of the above results.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
20
<strong>  As the voltage in the circuit is increased (but not to the breakdown voltage), the capacitance</strong> A) increases. B) decreases. C) does not change. D) increases, decreases, or does not change, depending on the charge on the plates of the capacitor. E) does none of these. As the voltage in the circuit is increased (but not to the breakdown voltage), the capacitance

A) increases.
B) decreases.
C) does not change.
D) increases, decreases, or does not change, depending on the charge on the plates of the capacitor.
E) does none of these.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
21
If the potential difference of a capacitor is reduced by one-half, the energy stored in that capacitor is

A) reduced to one-half.
B) reduced to one-quarter.
C) increased by a factor of 2.
D) increased by a factor of 4.
E) not changed.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
22
The charge on each capacitor in a set of capacitors in parallel is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
23
Use the following figure to answer the next five problems: <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram below. If the potential difference between A and B is 24.5 V, what is the total energy stored in this system of capacitors if C<sub>1</sub> = 5.0 µF, C<sub>2</sub> = 4.0 µF, and C<sub>3</sub> = 3.0 µF?</strong> A) 1.7 * 10<sup>-4</sup> J B) 1.5 *10<sup>-4</sup> J C) 2.2 *10<sup>-5</sup> J D) 6.8 * 10<sup>-4</sup> J E) 4.0 * 10<sup>-4</sup> J

-You connect three capacitors as shown in the diagram below. If the potential difference between A and B is 24.5 V, what is the total energy stored in this system of capacitors if C1 = 5.0 µF, C2 = 4.0 µF, and C3 = 3.0 µF?

A) 1.7 * 10-4 J
B) 1.5 *10-4 J
C) 2.2 *10-5 J
D) 6.8 * 10-4 J
E) 4.0 * 10-4 J
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
24
A coaxial cable consists of a wire of radius 1.0 mm and an outer conducting shell of radius 8 mm. A 20 V potential difference is applied between the wire and the shell. What is the energy stored per meter of the cable?

A) 5.35 nJ/m
B) 10.7 nJ/m
C) 2.67 nJ/m
D) 61.6 pJ/m
E) 123 pJ/m
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
25
Use the following figure to answer the next five problems:  <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram. C<sub>1</sub> = C<sub>3</sub> = 2.5  \mu F, and C<sub>2</sub> = 5.0  \mu F. A potential difference of 9.0 V is maintained between the terminals A and B. The magnitude of the charge on capacitor C<sub>3</sub> is approximately</strong> A) 4.2  \mu C B) 4.8  \mu C C) 17  \mu C D) 37  \mu C E) 90  \mu C

-You connect three capacitors as shown in the diagram. C1 = C3 = 2.5 μ\mu F, and
C2 = 5.0 μ\mu F. A potential difference of 9.0 V is maintained between the terminals A and B. The magnitude of the charge on capacitor C3 is approximately

A) 4.2 μ\mu C
B) 4.8 μ\mu C
C) 17 μ\mu C
D) 37 μ\mu C
E) 90 μ\mu C
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
26
If the area of the plates of a parallel plate capacitor is halved and the separation between the plates tripled, while the charge on the capacitor remains constant, then by what factor does the energy stored in the capacitor change?

A) increase by a factor of 2
B) decrease by a factor of 2/3
C) increase by a factor of 6
D) increase by a factor of 3/2
E) decrease by a factor of 1/6
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
27
The voltage across each capacitor in a set of capacitors in parallel is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
28
If 20 capacitors, each of 100 μ\mu F, were connected in parallel across a 12-V battery, what would be the total energy stored in the capacitors?

A) 2.9 * 10-1 J
B) 7.2 * 10-3 J
C) 1.2 * 10-2 J
D) 1.4 *10-1 J
E) 3.6 * 10-4 J
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
29
You attach a 30-pF capacitor across a 1.5-V battery. How much energy is stored in the capacitor?

A) 3.4 * 10-11 J
B) 4.5 * 10-11 J
C) 6.7 * 10-11 J
D) 3.4 * 10-8 J
E) 4.5 * 10-8 J
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
30
Use the following figure to answer the next five problems:  <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram. C<sub>1</sub> = 5.0  \mu F, C<sub>2</sub> = 4.0  \mu F, and C<sub>3</sub> = 3.0  \mu F. If you apply 12 V between points A and B, the energy stored in C<sub>3</sub> will be approximately</strong> A) 0.16 mJ B) 41  \mu J C) 0.12 mJ D) 0.41 mJ E) 16 mF

-You connect three capacitors as shown in the diagram. C1 = 5.0 μ\mu F, C2 = 4.0 μ\mu F, and
C3 = 3.0 μ\mu F. If you apply 12 V between points A and B, the energy stored in C3 will be approximately

A) 0.16 mJ
B) 41 μ\mu J
C) 0.12 mJ
D) 0.41 mJ
E) 16 mF
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
31
A coaxial cable has the inner wire of radius a = 1 mm and the outside shield of radius
B = 8 mm. The electric field strength between the wire and the shield is given by  <strong>A coaxial cable has the inner wire of radius a = 1 mm and the outside shield of radius B = 8 mm. The electric field strength between the wire and the shield is given by   . The electrostatic energy per meter of the cable is</strong> A) 0.328 nJ B) 6.69  \mu J C) 3.34  \mu J D) 14.5  \mu J E) zero  . The electrostatic energy per meter of the cable is

A) 0.328 nJ
B) 6.69 μ\mu J
C) 3.34 μ\mu J
D) 14.5 μ\mu J
E) zero
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
32
You charge a 4.0-µF capacitor to 150 V. How much additional energy must you add to charge it to 300 V?

A) 0.60 mJ
B) 0.14 J
C) 18 µJ
D) 0.30 mJ
E) 0.28 J
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
33
The energy stored in a capacitor is directly proportional to

A) the voltage across the capacitor.
B) the charge on the capacitor.
C) the reciprocal of the charge on the capacitor.
D) the square of the voltage across the capacitor.
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
34
A parallel plate capacitor is constructed using two square metal sheets, each of side
L = 10 cm. The plates are separated by a distance d = 2 mm and a voltage applied between the plates. The electric field strength within the plates is E = 4000 V/m. The energy stored in the capacitor is

A) 0.71 nJ
B) 1.42 nJ
C) 2.83 nJ
D) 3.67 nJ
E) zero
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
35
You connect three capacitors as shown in the diagram. C1 = C3 = 2.5 μ\mu F, and
C2 = 5.0 μ\mu F. A potential difference of 9.0 V is maintained between the terminals A and B. The voltage across on capacitor C3 is approximately

A) 1.2 V
B) 7.9 V
C) 3.2 V
D) 5.4 V
E) 6.8 V
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
36
A coaxial cable consists of a wire of radius 1.0 mm and an outer conducting shell of radius 8 mm. A 20 V potential difference is applied between the wire and the shell. What is the energy stored in a 2 m length of the cable?

A) 5.35 nJ
B) 10.7 nJ
C) 2.67 nJ
D) 61.6 pJ
E) 123 pJ
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
37
A 2.0-µF capacitor has a potential difference of 5000 V. The work done in charging it was

A) 2.5 J
B) 5.0 J
C) 25 J
D) 5.0 mJ
E) 0.50 kJ
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
38
Use the following figure to answer the next five problems:  <strong>Use the following figure to answer the next five problems:    -You connect three capacitors as shown in the diagram below. The effective capacitance of this combination when C<sub>1</sub> = 5.0 \mu F, C<sub>2</sub> = 4.0  \mu F, and C<sub>3</sub> = 3.0  \mu F is approximately</strong> A) 0.44  \mu F B) 2.3  \mu F C) 3.5  \mu F D) 5.2  \mu F E) 12  \mu F

-You connect three capacitors as shown in the diagram below. The effective capacitance of this combination when C1 = 5.0 μ\mu F, C2 = 4.0 μ\mu F, and C3 = 3.0 μ\mu F is approximately

A) 0.44 μ\mu F
B) 2.3 μ\mu F
C) 3.5 μ\mu F
D) 5.2 μ\mu F
E) 12 μ\mu F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
39
A cardiac defibrillator can be used to help an erratic heartbeat in a regular fashion. A defibrillator contains a capacitor charged to a voltage of 6000 V with an energy storage of 200 J. Calculate the capacitance of the capacitor.

A) 6.67 * 10-2 F
B) 1.11 *10-5 F
C) 5.56 *10-6 F
D) 2.22 * 10-5 F
E) 13.3 F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
40
If you decrease the charge on a parallel-plate capacitor from 12 µC to 4 µC and increase the plate separation from 1 mm to 3 mm, the energy stored in the capacitor changes by a factor of

A) 27
B) 1/3
C) 3
D) 8
E) 1/4
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
41
A capacitor, C1 = 5.0 μ\mu F, is charged up to 8 V. It is then connected to a second uncharged capacitor C2 = 2.5 μ\mu F. The charge on C1 after the system has come to equilibrium is

A) 26.7 μ\mu C
B) 13.3 μ\mu C
C) 20.0 μ\mu C
D) 40.0 μ\mu C
E) 6.67 μ\mu C
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
42
When you insert a piece of paper ( κ\kappa = 3.7) into the air between the plates of a capacitor, the capacitance

A) increases.
B) decreases.
C) does not change.
D) could increase, decrease, or not change depending on the dielectric constant of the paper.
E) does none of these.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
43
You connect two capacitors C1 = 15 pF and C2 = 30 pF in series across a 1.5-V battery. The potential difference across capacitor C1 is approximately

A) 0.50 V
B) 1.0 V
C) 1.5 V
D) 0.33 V
E) 0.67 V
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
44
The equivalent capacitance of two capacitors in series is

A) the sum of their capacitances.
B) the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the capacitances.
E) described by none of the above.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
45
A capacitor, C1 = 5.0 μ\mu F, is charged up to 8 V. It is then connected to a second uncharged capacitor C2 = 2.5 μ\mu F. The voltage across the capacitor C1 after the system has come to equilibrium is

A) 2.67 V
B) 4.0 V
C) 5.33 V
D) 8.0 V
E) 12.0 V
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
46
A 1.0- μ\mu F capacitor and a 2.0- μ\mu F capacitor are connected in series across a 1200-V source. The charge on each capacitor is

A) 0.40 mC
B) 0.80 mC
C) 1.2 mC
D) 1.8 mC
E) 3.6 mC
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
47
<strong>  If C<sub>1</sub> < C<sub>2</sub> < C<sub>3</sub> < C<sub>4</sub> for the combination of capacitors shown, the equivalent capacitance</strong> A) is less than C<sub>1</sub>. B) is more than C<sub>4</sub>. C) is between C<sub>2</sub> and C<sub>3</sub>. D) is more than C<sub>2</sub>. E) could be any value depending on the applied voltage. If C1 < C2 < C3 < C4 for the combination of capacitors shown, the equivalent capacitance

A) is less than C1.
B) is more than C4.
C) is between C2 and C3.
D) is more than C2.
E) could be any value depending on the applied voltage.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
48
The equivalent capacitance of three capacitors in series is

A) the sum of their capacitances.
B) the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the capacitances.
E) described by none of the above.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
49
The equivalent capacitance of two capacitors in parallel is

A) the sum of the reciprocals of their capacitances.
B) the reciprocal of the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the two capacitances.
E) described by none of the above.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
50
The charge on each capacitor in a set of capacitors in series is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
51
The voltage across each capacitor in a set of capacitors in series is

A) directly proportional to its capacitance.
B) inversely proportional to its capacitance.
C) independent of its capacitance.
D) the same.
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
52
The equivalent capacitance of three capacitors in parallel is

A) the sum of the reciprocals of their capacitances.
B) the reciprocal of the sum of the reciprocals of their capacitances.
C) always greater than the larger of their capacitances.
D) always less than the smaller of the two capacitances.
E) described by none of the above.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
53
 <strong>  If all the four capacitors have equal values of 50  \mu F then calculate the equivalent capacitance of the circuit shown above.</strong> A) 50  \mu F B) 30  \mu F C) 75  \mu F D) 100  \mu F E) 83  \mu F  If all the four capacitors have equal values of 50 μ\mu F then calculate the equivalent capacitance of the circuit shown above.

A) 50 μ\mu F
B) 30 μ\mu F
C) 75 μ\mu F
D) 100 μ\mu F
E) 83 μ\mu F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
54
A capacitor, C1 = 5.0 μ\mu F, is charged up to 8 V. It is then connected to a second uncharged capacitor C2 = 2.5 μ\mu F. The charge on C2 after the system has come to equilibrium is

A) 26.7 μ\mu C
B) 13.3 μ\mu C
C) 20.0 μ\mu C
D) 40.0 μ\mu C
E) 6.67 μ\mu C
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
55
You connect two 12- μ\mu F capacitors and a 6- μ\mu F capacitor in parallel. The equivalent capacitance of the combination is

A) 18 μ\mu F
B) 4 μ\mu F
C) 3 μ\mu F
D) 30 μ\mu F
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
56
The capacitance of a parallel-plate capacitor

A) is defined as the amount of work required to move a charge from one plate to the other.
B) decreases if a dielectric is placed between its plates.
C) is independent of the distance between the plates.
D) has units of J/C.
E) is independent of the charge on the capacitor.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
57
A capacitor is made with two strips of metal foil, each 2.5 cm wide by 50 cm long, with a 0.70- μ\mu m thick strip of paper ( κ\kappa = 3.7) sandwiched between them. The capacitor is rolled up to save space. What is the capacitance of this device? (The permittivity of free space ϵ\epsilon 0 = 8.85 *10-12 F/m.)

A) 43 nF
B) 0.16 μ\mu F
C) 0.58 μ\mu F
D) 2.0 μ\mu F
E) 7.3 μ\mu F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
58
<strong>  If C<sub>1</sub> < C<sub>2</sub> < C<sub>3</sub> < C<sub>4</sub> for the combination of capacitors shown, the equivalent capacitance</strong> A) is less than C<sub>1</sub>. B) is more than C<sub>4</sub>. C) is between C<sub>2</sub> and C<sub>3</sub>. D) is less than C<sub>2</sub>. E) could be any value depending on the applied voltage. If C1 < C2 < C3 < C4 for the combination of capacitors shown, the equivalent capacitance

A) is less than C1.
B) is more than C4.
C) is between C2 and C3.
D) is less than C2.
E) could be any value depending on the applied voltage.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
59
Three capacitors 2 μ\mu F, 4 μ\mu F and 8 μ\mu F are connected in parallel across a 120-V source. The charge on the 4 μ\mu F capacitor is

A) 2.4 * 10-4 C
B) 9.6 * 10-4 C
C) 2.1 * 103 C
D) 1.7 * 10-3 C
E) 4.8 * 10-4 C
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
60
<strong>  You want to use three capacitors in a circuit. If each capacitor has a capacitance of 3 pF, the configuration that gives you an equivalent capacitance of 2 pF between points x and y is</strong> A) 1 B) 2 C) 3 D) 4 E) None of these is correct. You want to use three capacitors in a circuit. If each capacitor has a capacitance of 3 pF, the configuration that gives you an equivalent capacitance of 2 pF between points x and y is

A) 1
B) 2
C) 3
D) 4
E) None of these is correct.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
61
<strong>  A capacitor is connected to a battery as shown. When a dielectric is inserted between the plates of the capacitor,</strong> A) only the capacitance changes. B) only the voltage across the capacitor changes. C) only the charge on the capacitor changes. D) both the capacitance and the voltage change. E) both the capacitance and the charge change. A capacitor is connected to a battery as shown. When a dielectric is inserted between the plates of the capacitor,

A) only the capacitance changes.
B) only the voltage across the capacitor changes.
C) only the charge on the capacitor changes.
D) both the capacitance and the voltage change.
E) both the capacitance and the charge change.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
62
A parallel-plate capacitor has square plates of side 12 cm and a separation of 6.0 mm. A dielectric slab of constant κ\kappa = 2.0 has the same area as the plates but has a thickness of 3.0 mm. What is the capacitance of this capacitor with the dielectric slab between its plates?

A) 28 pF
B) 21 pF
C) 16 pF
D) 37 pF
E) 53 pF
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
63
The space between the inner wire of radius a = 1 mm of a co-axial cable and the conducting shield of radius b = 8 mm is made of nylon ( κ\kappa = 4.2). A potential difference of 20 V is maintained between the wire and the shield. The energy stored per meter of the cable is

A) 1.12 nJ/m
B) 22.5 nJ/m
C) 44.9 nJ/m
D) 5.36 nJ/m
E) 2.68 nJ/m
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
64
A parallel plate capacitor has a plate spacing of 1.5 mm, which is filled with a dielectric of κ\kappa = 4.3, and its capacitance is 80 μ\mu F. If the dielectric is taken out and the plate spacing doubled, then what is the new capacitance?

A) 690 μ\mu F
B) 37 μ\mu F
C) 9.3 μ\mu F
D) 170 μ\mu F
E) 19 μ\mu F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
65
If a dielectric is inserted between the plates of a parallel-plate capacitor that is connected to a 100-V battery, the

A) voltage across the capacitor decreases.
B) electric field between the plates decreases.
C) electric field between the plates increases.
D) charge on the capacitor plates decreases.
E) charge on the capacitor plates increases.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
66
 <strong>  Two identical capacitors A and B are connected across a battery, as shown. If mica ( \kappa  = 5.4) is inserted in B,</strong> A) both capacitors will retain the same charge. B) B will have the larger charge. C) A will have the larger charge. D) the potential difference across B will increase. E) the potential difference across A will increase.  Two identical capacitors A and B are connected across a battery, as shown. If mica ( κ\kappa = 5.4) is inserted in B,

A) both capacitors will retain the same charge.
B) B will have the larger charge.
C) A will have the larger charge.
D) the potential difference across B will increase.
E) the potential difference across A will increase.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
67
The capacitance of a parallel-plate capacitor is 24 μ\mu F when the plates are separated by a material of dielectric constant 2.0. If this material is removed, leaving air between the plates, and the separation between the plates is tripled, the capacitance is

A) unchanged
B) 16 μ\mu F
C) 36 F μ\mu F
D) 0.14 mF
E) 4.0 μ\mu F
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
68
A potential of 12 V is applied across a parallel-plate capacitor which is constructed of square plates of side 10 cm and separation of 4.0 mm. A dielectric slab of constant
κ\kappa = 2.5 is inserted between the plates so that it completely fills the space. What is the bound surface charge density on the dielectric?

A) 12.3 pC/m2
B) 15.9 pC/m2
C) 39.8 pC/m2
D) 56.8 pC/m2
E) 85.4 pC/m2
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
69
 <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  A charged capacitor has an initial electric field  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  0 and potential difference V0 across its plates. Without connecting any source of emf, you insert a dielectric ( κ\kappa > 1) slab between the plates to produce an electric field  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  d and a potential difference Vd across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is

A)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  d >  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  0; Vd > V0
B)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  d =  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  0; Vd > V0
C)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  d >  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  0; Vd = V0
D)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  d <  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  0; Vd > V0
E)  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  d <  <strong>  A charged capacitor has an initial electric field   <sub>0</sub> and potential difference V<sub>0</sub> across its plates. Without connecting any source of emf, you insert a dielectric ( \kappa  > 1) slab between the plates to produce an electric field   <sub>d</sub> and a potential difference V<sub>d</sub> across the capacitor. The pair of statements that best represents the relationships between the electric fields and potential differences is</strong> A)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> B)   <sub>d</sub> =   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> C)   <sub>d</sub> >   <sub>0</sub>; V<sub>d</sub> = V<sub>0 </sub> D)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> > V<sub>0 </sub> E)   <sub>d</sub> <   <sub>0</sub>; V<sub>d</sub> < V<sub>0 </sub>  0; Vd < V0
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
70
Two parallel plate air capacitors, each of capacitance X F are in series with a battery of 12-V. If a dielectric with κ\kappa = 3 is inserted between the plates of one of the capacitors, then calculate the change in electrical charge (in Coulombs) that occurs on one of its plates.

A) 9X
B) 3X/4
C) 3X
D) 16X
E) none of the above
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
71
The space between the inner wire of radius a = 1 mm of a co-axial cable and the conducting shield of radius b = 8 mm is made of nylon ( κ\kappa = 4.2). The capacitance per meter is

A) 13.4 pF
B) 26.8 pF
C) 35.8 pF
D) 56.2 pF
E) 112 pF
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
72
A parallel plate capacitor of area A = 30 cm2 and separation d = 5 mm is charged by a battery of 60-V. If the air between the plates is replaced by a dielectric of κ\kappa = 4 with the battery still connected, then what is the ratio of the initial charge on the plates divided by the final charge on the plates?

A) 4.3
B) 1
C) 16
D) 0.25
E) 4.0
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
73
An electric field, E, is applied to a dielectric. Which of the following statements is true?

A) The electric field within the dielectric is less than E.
B) The dielectric produces an electric field in the opposite direction to E.
C) The molecules in the dielectric become polarized.
D) The electric field will produce a torque on molecules in dielectrics which have permanent dipoles.
E) All the above statements are true.
Unlock Deck
Unlock for access to all 73 flashcards in this deck.
Unlock Deck
k this deck
locked card icon
Unlock Deck
Unlock for access to all 73 flashcards in this deck.