Deck 2: Job-Order Costing

Question 1

A debit balance in the Manufacturing Overhead account at the end of the year means that manufacturing overhead is overapplied.

Answer 1

False

Question 2

Underapplied or overapplied manufacturing overhead represents the difference between actual overhead costs and applied overhead costs.

Answer 2

True

Question 3

Top management salaries should not go into the Manufacturing Overhead account.

Answer 3

True

Question 4

The process of assigning overhead cost to jobs is known as overhead application.

Question 5

In a job-order costing system,direct labor cost is ordinarily debited to:

A)Manufacturing Overhead.
B)Cost of Goods Sold.
C)Finished Goods.
D)Work in Process.

Question 6

Advertising costs should be charged to the Manufacturing Overhead account.

Question 7

A job cost sheet is used to accumulate costs charged to a job.

Question 8

The following journal entry would be made to apply overhead cost to jobs in a job-order costing system:

Question 9

In a job-order costing system,the use of direct materials that have been previously purchased is recorded as a debit to:

A)Raw Materials inventory.
B)Work in Process inventory.
C)Finished Goods inventory.
D)Manufacturing Overhead.

Question 10

If manufacturing overhead applied exceeds the actual manufacturing overhead costs of the period,then manufacturing overhead is overapplied.

Question 11

Period costs are expensed as incurred,rather than going into the Work in Process account.

Question 12

In computing its predetermined overhead rate,Marple Company inadvertently left its indirect labor costs out of the computation.This oversight will cause:

A)Manufacturing Overhead to be overapplied.
B)The Cost of Goods Manufactured to be understated.
C)The debits to the Manufacturing Overhead account to be understated.
D)The ending balance in Work in Process to be overstated.

Question 13

What document is used to determine the actual amount of direct labor to record on a job cost sheet?

A)Time ticket
B)Payroll register
C)Production order
D)Wages payable account

Question 14

The cost of a completed job in a job-order costing system typically consists of the actual direct materials cost of the job,the actual direct labor cost of the job,and the actual manufacturing overhead cost of the job.

Question 15

Which of the following is the correct formula to compute the predetermined overhead rate?

A)Estimated total units in the allocation base divided by estimated total manufacturing overhead costs.
B)Estimated total manufacturing overhead costs divided by estimated total units in the allocation base.
C)Actual total manufacturing overhead costs divided by estimated total units in the allocation base.
D)Estimated total manufacturing overhead costs divided by actual total units in the allocation base.

Question 16

Which of the following would probably be the least appropriate allocation base for allocating overhead in a highly automated manufacturer of specialty valves?

A)Machine-hours
B)Power consumption
C)Direct labor-hours
D)Machine setups

Question 17

Under a job-order cost system the Work in Process account is debited with the cost of materials purchased.

Question 18

The use of predetermined overhead rates in a job-order cost system makes it possible to estimate the total cost of a given job as soon as production is completed.

Question 19

When a job has been completed,the goods are transferred from the production department to the finished goods warehouse and the journal entry would include a credit to Work in Process.

Question 20

A proper journal entry to close overapplied manufacturing overhead to Cost of Goods Sold would be:

A)
B)
C)
D)

Question 21

The Work in Process inventory account of a manufacturing firm shows a balance of $3,000 at the end of an accounting period.The job cost sheets of two uncompleted jobs show charges of $500 and $300 for direct materials,and charges of $400 and $600 for direct labor.From this information,it appears that the company is using a predetermined overhead rate,as a percentage of direct labor costs,of:

A)83%
B)120%
C)40%
D)300%

Question 22

Overapplied manufacturing overhead occurs when:

A)applied overhead exceeds actual overhead.
B)applied overhead exceeds estimated overhead.
C)actual overhead exceeds estimated overhead.
D)budgeted overhead exceeds actual overhead.

Question 23

Hayne Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.Data for the most recently completed year appear below: The predetermined overhead rate for the recently completed year was closest to:

A)$7.89
B)$30.95
C)$24.52
D)$32.41

Question 24

Which terms will make the following statement true? When manufacturing overhead is overapplied,the Manufacturing Overhead account has a __________ balance and applied manufacturing overhead is greater than __________ manufacturing overhead.

A)debit,actual
B)credit,actual
C)debit,estimated
D)credit,estimated

Question 25

At the beginning of the year,manufacturing overhead for the year was estimated to be $267,500.At the end of the year,actual direct labor-hours for the year were 22,100 hours,the actual manufacturing overhead for the year was $262,500,and manufacturing overhead for the year was overapplied by $13,750.If the predetermined overhead rate is based on direct labor-hours,then the estimated direct labor-hours at the beginning of the year used in the predetermined overhead rate must have been:

A)22,100 direct labor-hours
B)19,900 direct labor-hours
C)21,000 direct labor-hours
D)21,400 direct labor-hours

Question 26

Yista Corporation uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs.The company estimated manufacturing overhead at $510,000 for the year and direct labor-hours at 100,000 hours.Actual manufacturing overhead costs incurred during the year totaled $540,000.Actual direct labor-hours were 105,000.What was the overapplied or underapplied overhead for the year?

A)$30,000 overapplied
B)$30,000 underapplied
C)$4,500 overapplied
D)$4,500 underapplied

Question 27

Washtenaw Corporation uses a job-order costing system.The following data are for last year: Washtenaw applies overhead using a predetermined rate based on direct labor-hours.What predetermined overhead rate was used last year?

A)$3.55 per direct labor-hour
B)$3.25 per direct labor-hour
C)$3.08 per direct labor-hour
D)$3.36 per direct labor-hour

Question 28

In a job-order costing system,indirect materials that have been previously purchased and that are used in production are recorded as a debit to:

A)Work in Process inventory.
B)Manufacturing Overhead.
C)Finished Goods inventory.
D)Raw Materials inventory.

Question 29

Brace Corporation uses direct labor-hours in its predetermined overhead rate.At the beginning of the year,the estimated direct labor-hours were 21,600 hours.At the end of the year,actual direct labor-hours for the year were 20,400 hours,the actual manufacturing overhead for the year was $506,920,and manufacturing overhead for the year was underapplied by $23,440.The estimated manufacturing overhead at the beginning of the year used in the predetermined overhead rate must have been:

A)$501,920
B)$531,445
C)$483,480
D)$511,920

Question 30

Crinks Corporation uses direct labor-hours in its predetermined overhead rate.At the beginning of the year,the estimated direct labor-hours were 11,200 hours and the total estimated manufacturing overhead was $259,840.At the end of the year,actual direct labor-hours for the year were 10,800 hours and the actual manufacturing overhead for the year was $254,840.Overhead at the end of the year was:

A)$4,280 overapplied
B)$9,280 overapplied
C)$9,280 underapplied
D)$4,280 underapplied

Question 31

Wert Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs.Last year,the company's estimated manufacturing overhead was $1,200,000 and its estimated level of activity was 50,000 direct labor-hours.The company's direct labor wage rate is $12 per hour.Actual manufacturing overhead amounted to $1,240,000,with actual direct labor cost of $650,000.For the year,manufacturing overhead was:

A)overapplied by $60,000
B)underapplied by $60,000
C)overapplied by $40,000
D)underapplied by $44,000

Question 32

Malcolm Company uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. The cost records for September will show:

A)Overapplied manufacturing overhead of $1,500
B)Underapplied overhead of $1,500
C)Overapplied manufacturing overhead of $3,500
D)Underapplied overhead of $3,500

Question 33

Which of the following accounts is debited when direct labor is recorded?

A)Work in process
B)Salaries and wages expense
C)Salaries and wages payable
D)Manufacturing overhead

Question 34

The journal entry to record the incurrence of indirect labor costs is:

A)
B)
C)
D)

Question 35

Capalbo Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year.At the beginning of the most recently completed year,the company estimated the labor-hours for the upcoming year at 52,000 labor-hours.The estimated variable manufacturing overhead was $2.78 per labor-hour and the estimated total fixed manufacturing overhead was $1,192,360.The actual labor-hours for the year turned out to be 52,600 labor-hours.The predetermined overhead rate for the recently completed year was closest to:

A)$2.78
B)$25.45
C)$25.71
D)$22.93

Question 36

Martinez Aerospace Company uses a job-order costing system.The direct materials for Job #045391 were purchased in July and put into production in August.The job was not completed by the end of August.At the end of August,in what account would the direct material cost assigned to Job #045391 be located?

A)Raw materials inventory
B)Work in process inventory
C)Finished goods inventory
D)Cost of goods manufactured

Question 37

Simoneaux Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.At the beginning of the most recently completed year,the company estimated the machine-hours for the upcoming year at 22,000 machine-hours.The estimated variable manufacturing overhead was $8.65 per machine-hour and the estimated total fixed manufacturing overhead was $609,400.The predetermined overhead rate for the recently completed year was closest to:

A)$36.35 per machine-hour
B)$27.70 per machine-hour
C)$33.32 per machine-hour
D)$8.65 per machine-hour

Question 38

The balance in the Work in Process account equals:

A)the balance in the Finished Goods inventory account.
B)the balance in the Cost of Goods Sold account.
C)the balances on the job cost sheets of uncompleted jobs.
D)the balance in the Manufacturing Overhead account.

Question 39

Daguio Corporation uses direct labor-hours in its predetermined overhead rate.At the beginning of the year,the total estimated manufacturing overhead was $224,580.At the end of the year,actual direct labor-hours for the year were 18,200 hours,manufacturing overhead for the year was underapplied by $12,100,and the actual manufacturing overhead was $219,580.The predetermined overhead rate for the year must have been closest to:

A)$11.40 per machine-hour
B)$12.34 per machine-hour
C)$12.06 per machine-hour
D)$10.53 per machine-hour

Question 40

Which of the following is correct with respect to closing out overapplied manufacturing overhead to Cost of Goods Sold versus closing it out to Cost of Goods Sold and Finished Goods and Work in Process inventories?

A)The balance in the Work in Process account after allocation will be higher if the overapplied manufacturing overhead is closed out by allocating it to all appropriate accounts.
B)The balance in the Work in Process account after allocation will be the same under either method.
C)Net operating income will be higher if all of the overapplied manufacturing overhead is closed out to Cost of Goods Sold.
D)Cost of Goods Sold will be lower if the overapplied manufacturing overhead is closed out by allocating it to the inventory accounts as well as to Cost of Goods Sold.

Question 41

Kelsh Company uses a predetermined overhead rate based on machine-hours to apply manufacturing overhead to jobs.The company has provided the following estimated costs for next year: Kelsh estimates that 5,000 direct labor-hours and 10,000 machine-hours will be worked during the year.The predetermined overhead rate per hour will be:

A)$6.80
B)$6.40
C)$3.40
D)$8.20

Question 42

Kirson Corporation incurred $89,000 of actual Manufacturing Overhead costs during December.During the same period,the Manufacturing Overhead applied to Work in Process was $92,000.The journal entry to record the application of Manufacturing Overhead to Work in Process would include a:

A)debit to Manufacturing Overhead of $92,000
B)debit to Work in Process of $89,000
C)credit to Manufacturing Overhead of $92,000
D)credit to Work in Process of $89,000

Question 43

During July at Tiner Corporation,$74,000 of raw materials were requisitioned from the storeroom for use in production.These raw materials included both direct and indirect materials.The indirect materials totaled $7,000.The journal entry to record this requisition would include a debit to Manufacturing Overhead of:

A)$0
B)$74,000
C)$7,000
D)$67,000

Question 44

During December at Ingrim Corporation,$74,000 of raw materials were requisitioned from the storeroom for use in production.These raw materials included both direct and indirect materials.The indirect materials totaled $6,000.The journal entry to record the requisition from the storeroom would include a:

A)debit to Raw Materials of $74,000
B)debit to Work in Process of $68,000
C)credit to Manufacturing Overhead of $6,000
D)debit to Work in Process of $74,000

Question 45

Kaiser Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.Data for the upcoming year appear below: The predetermined overhead rate for the recently completed year was closest to:

A)$6.68
B)$25.02
C)$25.59
D)$18.34

Question 46

The operations of the Kerry Company resulted in underapplied overhead of $5,000.The entry to close out this balance to Cost of Goods Sold and the effect of the underapplied overhead on Cost of Goods Sold would be:

A)Option A
B)Option B
C)Option C
D)Option D

Question 47

Reichelderfer Corporation has provided data concerning the company's Manufacturing Overhead account for the month of August.Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold,the total of the debits to the Manufacturing Overhead account was $50,000 and the total of the credits to the account was $72,000.Which of the following statements is true?

A)Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $72,000.
B)Manufacturing overhead applied to Work in Process for the month was $50,000.
C)Actual manufacturing overhead for the month was $50,000.
D)Manufacturing overhead for the month was underapplied by $22,000.

Question 48

Stickles Corporation incurred $79,000 of actual Manufacturing Overhead costs during August.During the same period,the Manufacturing Overhead applied to Work in Process was $75,000.The journal entry to record the incurrence of the actual Manufacturing Overhead costs would include a:

A)debit to Manufacturing Overhead of $79,000
B)credit to Manufacturing Overhead of $79,000
C)credit to Work in Process of $75,000
D)debit to Work in Process of $75,000

Question 49

At the beginning of August,Hogancamp Corporation had $26,000 of raw materials on hand.During the month,the company purchased an additional $73,000 of raw materials.During August,$77,000 of raw materials were requisitioned from the storeroom for use in production.The credits to the Raw Materials account for the month of August total:

A)$73,000
B)$77,000
C)$99,000
D)$26,000

Question 50

Job 731 was recently completed.The following data have been recorded on its job cost sheet: The company applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $14 per machine-hour.The total cost that would be recorded on the job cost sheet for Job 731 would be:

A)$3,288
B)$5,094
C)$4,254
D)$2,418

Question 51

Hults Corporation has provided data concerning the company's Manufacturing Overhead account for the month of November.Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold,the total of the debits to the Manufacturing Overhead account was $75,000 and the total of the credits to the account was $57,000.Which of the following statements is true?

A)Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $75,000.
B)Actual manufacturing overhead incurred during the month was $57,000.
C)Manufacturing overhead applied to Work in Process for the month was $75,000.
D)Manufacturing overhead for the month was underapplied by $18,000.

Question 52

In May,Hervey Inc.incurred $60,000 of direct labor costs and $3,000 of indirect labor costs.The journal entry to record the accrual of these wages would include a:

A)credit to Manufacturing Overhead of $3,000
B)debit to Work in Process of $63,000
C)credit to Work in Process of $63,000
D)debit to Manufacturing Overhead of $3,000

Question 53

Wedd Corporation had $35,000 of raw materials on hand on May 1.During the month,the company purchased an additional $68,000 of raw materials.During May,$92,000 of raw materials were requisitioned from the storeroom for use in production.These raw materials included both direct and indirect materials.The indirect materials totaled $5,000.The debits to the Work in Process account as a consequence of the raw materials transactions in May total:

A)$92,000
B)$0
C)$68,000
D)$87,000

Question 54

The following data have been recorded for recently completed Job 674 on its job cost sheet.Direct materials cost was $2,039.A total of 32 direct labor-hours and 175 machine-hours were worked on the job.The direct labor wage rate is $14 per labor-hour.The company applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $15 per machine-hour.The total cost for the job on its job cost sheet would be:

A)$2,967
B)$2,487
C)$2,068
D)$5,112

Question 55

During October,Crusan Corporation incurred $62,000 of direct labor costs and $4,000 of indirect labor costs.The journal entry to record the accrual of these wages would include a:

A)debit to Work in Process of $66,000
B)credit to Work in Process of $66,000
C)debit to Work in Process of $62,000
D)credit to Work in Process of $62,000

Question 56

During February,Degan Inc.transferred $60,000 from Work in Process to Finished Goods and recorded a Cost of Goods Sold of $65,000.The journal entries to record these transactions would include a:

A)debit to Finished Goods of $65,000
B)credit to Cost of Goods Sold of $65,000
C)credit to Work in Process of $60,000
D)credit to Finished Goods of $60,000

Question 57

The Donaldson Company uses a job-order costing system.The following data were recorded for July: Overhead is applied to jobs at the rate of 80% of direct materials cost.Jobs 475,477,and 478 were completed during July and transferred to finished goods.Jobs 475 and 478 have been delivered to the customer.Donaldson's Work in Process inventory balance on July 31 was:

A)$7,280
B)$2,600
C)$3,160
D)$3,320

Question 58

Valles Corporation had $22,000 of raw materials on hand on February 1.During the month,the company purchased an additional $75,000 of raw materials.The journal entry to record the purchase of raw materials would include a:

A)credit to Raw Materials of $97,000
B)debit to Raw Materials of $97,000
C)credit to Raw Materials of $75,000
D)debit to Raw Materials of $75,000

Question 59

On February 1,Caddell Corporation had $28,000 of raw materials on hand.During the month,the company purchased an additional $70,000 of raw materials.During February,$81,000 of raw materials were requisitioned from the storeroom for use in production.The debits to the Raw Materials account for the month of February total:

A)$98,000
B)$70,000
C)$28,000
D)$81,000

Question 60

Vandagriff Corporation has provided data concerning the company's Manufacturing Overhead account for the month of June.Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold,the total of the debits to the Manufacturing Overhead account was $77,000 and the total of the credits to the account was $64,000.Which of the following statements is true?

A)Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $77,000.
B)Manufacturing overhead applied to Work in Process for the month was $64,000.
C)Manufacturing overhead for the month was overapplied by $13,000.
D)Actual manufacturing overhead incurred during the month was $64,000.

Question 61

The actual manufacturing overhead incurred at Hogans Corporation during April was $59,000,while the manufacturing overhead applied to Work in Process was $74,000.The company's Cost of Goods Sold was $289,000 prior to closing out its Manufacturing Overhead account.The company closes out its Manufacturing Overhead account to Cost of Goods Sold.Which of the following statements is true?

A)Manufacturing overhead was overapplied by $15,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $274,000
B)Manufacturing overhead was underapplied by $15,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $274,000
C)Manufacturing overhead was overapplied by $15,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $304,000
D)Manufacturing overhead was underapplied by $15,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $304,000

Question 62

Botton Inc.has provided the following data for the month of March.There were no beginning inventories;consequently,the direct materials,direct labor,and manufacturing overhead applied listed below are all for the current month. Manufacturing overhead for the month was underapplied by $7,000.

The company allocates any underapplied or overapplied manufacturing overhead among work in process,finished goods,and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The cost of goods sold for March after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:

A)$163,490
B)$177,490
C)$165,030
D)$175,950

Question 63

Lyster Inc.has provided the following data for the month of August.There were no beginning inventories;consequently,the direct materials,direct labor,and manufacturing overhead applied listed below are all for the current month. Manufacturing overhead for the month was underapplied by $1,000.

The company allocates any underapplied or overapplied manufacturing overhead among work in process,finished goods,and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The work in process inventory at the end of August after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:

A)$5,650
B)$5,645
C)$5,570
D)$5,575

Question 64

Caryl Inc.has provided the following data for the month of March.There were no beginning inventories;consequently,the direct materials,direct labor,and manufacturing overhead applied listed below are all for the current month. Manufacturing overhead for the month was underapplied by $10,000.

The company allocates any underapplied or overapplied manufacturing overhead among work in process,finished goods,and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for March would include the following:

A)credit to Finished Goods of $900
B)debit to Finished Goods of $29,200
C)credit to Finished Goods of $29,200
D)debit to Finished Goods of $900

Question 65

The following accounts are from last year's books at Sharp Manufacturing: Sharp uses job-order costing and applies manufacturing overhead to jobs based on direct labor costs.What is the amount of cost of goods manufactured for the year?

A)$252,000
B)$227,000
C)$230,000
D)$255,000

Question 66

Delhoyo Corporation,a manufacturing company,has provided data concerning its operations for September.The beginning balance in the raw materials account was $37,000 and the ending balance was $29,000.Raw materials purchased during the month totaled $57,000.Manufacturing overhead cost incurred during the month was $102,000,of which $2,000 consisted of raw materials classified as indirect materials.The direct materials cost for September was:

A)$63,000
B)$57,000
C)$65,000
D)$49,000

Question 67

Graeser Inc.has provided the following data for the month of May.There were no beginning inventories;consequently,the direct materials,direct labor,and manufacturing overhead applied listed below are all for the current month. Manufacturing overhead for the month was overapplied by $4,000.

The company allocates any underapplied or overapplied manufacturing overhead among work in process,finished goods,and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for May would include the following:

A)credit to Cost of Goods Sold of $100,110
B)credit to Cost of Goods Sold of $2,520
C)debit to Cost of Goods Sold of $2,520
D)debit to Cost of Goods Sold of $100,110

Question 68

Dydell Inc.has provided the following data for the month of December.There were no beginning inventories;consequently,the direct materials,direct labor,and manufacturing overhead applied listed below are all for the current month. Manufacturing overhead for the month was overapplied by $7,000.

The company allocates any underapplied or overapplied manufacturing overhead among work in process,finished goods,and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The finished goods inventory at the end of December after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:

A)$27,498
B)$30,220
C)$30,282
D)$27,560

Question 69

Jurper Corporation used $150,000 of direct materials during April.At the end of April,Jurper's direct materials inventory was $25,000 more than it was at the beginning of the month.Direct materials purchases during the April amounted to:

A)$0
B)$125,000
C)$150,000
D)$175,000

Question 70

Pinnini Co.uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs.Last year,Pinnini Company incurred $225,000 in actual manufacturing overhead cost.The Manufacturing Overhead account showed that overhead was overapplied $14,500 for the year.If the predetermined overhead rate was $5.00 per direct labor-hour,how many hours did the company work during the year?

A)45,000 hours
B)47,900 hours
C)42,100 hours
D)44,000 hours

Question 71

Dowan Company uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs.Last year Dowan Company incurred $156,600 in actual manufacturing overhead cost.The Manufacturing Overhead account showed that manufacturing overhead was underapplied by $12,600 for the year.If the predetermined overhead rate is $6.00 per direct labor-hour,how many hours did the company work during the year?

A)26,000 hours
B)24,000 hours
C)28,200 hours
D)25,000 hours

Question 72

Kelson Company applies overhead to jobs on the basis of 60% of direct labor cost.If Job 201 shows $27,000 of manufacturing overhead applied,the direct labor cost on the job was:

A)$16,200
B)$27,000
C)$37,800
D)$45,000

Question 73

Lietz Corporation has provided the following data concerning manufacturing overhead for January: The company's Cost of Goods Sold was $369,000 prior to closing out its Manufacturing Overhead account.The company closes out its Manufacturing Overhead account to Cost of Goods Sold.Which of the following statements is true?

A)Manufacturing overhead was underapplied by $23,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $392,000
B)Manufacturing overhead was underapplied by $23,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $346,000
C)Manufacturing overhead was overapplied by $23,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $346,000
D)Manufacturing overhead was overapplied by $23,000;Cost of Goods Sold after closing out the Manufacturing Overhead account is $392,000

Question 74

Minturn Inc.has provided the following data for the month of September.There were no beginning inventories;consequently,the direct materials,direct labor,and manufacturing overhead applied listed below are all for the current month. Manufacturing overhead for the month was underapplied by $2,000.

The company allocates any underapplied or overapplied manufacturing overhead among work in process,finished goods,and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for September would include the following:

A)debit to Work in Process of $120
B)credit to Work in Process of $15,800
C)debit to Work in Process of $15,800
D)credit to Work in Process of $120

Question 75

Under Lamprey Company's job-order costing system,manufacturing overhead is applied to Work in Process inventory using a predetermined overhead rate.During January,Lamprey's transactions included the following: Lamprey Company had no beginning or ending inventories.What was the cost of goods manufactured for January?

A)$302,000
B)$310,000
C)$322,000
D)$330,000

Question 76

Bakker Corporation applies manufacturing overhead on the basis of direct labor-hours. At the beginning of the most recent year, the company based its predetermined overhead rate on total estimated overhead of $77,250 and 2,500 estimated direct labor-hours. Actual manufacturing overhead for the year amounted to $79,000 and actual direct labor-hours were 2,400.

-The predetermined overhead rate for the year was closest to:

A)$29.66
B)$32.92
C)$31.60
D)$30.90

Question 77

Gest Inc.has provided the following data for the month of November.The balance in the Finished Goods inventory account at the beginning of the month was $49,000 and at the end of the month was $45,000.The cost of goods manufactured for the month was $226,000.The actual manufacturing overhead cost incurred was $74,000 and the manufacturing overhead cost applied to Work in Process was $70,000.The adjusted cost of goods sold that would appear on the income statement for November is:

A)$226,000
B)$230,000
C)$222,000
D)$234,000

Question 78

Desrevisseau Inc. ,a manufacturing company,has provided the following data for the month of August.The balance in the Work in Process inventory account was $10,000 at the beginning of the month and $22,000 at the end of the month.During the month,the company incurred direct materials cost of $63,000 and direct labor cost of $39,000.The actual manufacturing overhead cost incurred was $40,000.The manufacturing overhead cost applied to Work in Process was $43,000.The cost of goods manufactured for August was:

A)$133,000
B)$142,000
C)$145,000
D)$130,000

Question 79

Sharp Company's records show that overhead was overapplied by $10,000 last year.This overapplied manufacturing overhead was closed out to the Cost of Goods Sold account at the end of the year.In trying to determine why overhead was overapplied by such a large amount,the company has discovered that $6,000 of depreciation on factory equipment was charged to administrative expense in error.Given the above information,which of the following statements is true?

A)Manufacturing overhead was actually overapplied by $16,000 for the year.
B)The company's net income is understated by $6,000 for the year.
C)Under the circumstances posed above,the error in recording depreciation would have no effect on net operating income for the year.
D)The $6,000 in depreciation should have been charged to Work in Process rather than to administrative expense.

Question 80

Bakker Corporation applies manufacturing overhead on the basis of direct labor-hours. At the beginning of the most recent year, the company based its predetermined overhead rate on total estimated overhead of $77,250 and 2,500 estimated direct labor-hours. Actual manufacturing overhead for the year amounted to $79,000 and actual direct labor-hours were 2,400.

-The applied manufacturing overhead for the year was closest to:

A)$74,160
B)$71,184
C)$75,840
D)$79,008