Deck 21: Stud Welds

Question 1

____ welding can be described as the joining of a metal stud to another metal workpiece by means of arc, resistance, friction, or other appropriate welding process.

A) Joint
B) Resistance
C) Stud
D) Friction

Answer 1

C

Question 2

A welding process reference stud weld (sw) is included in the ____________________.

Answer 2

tail

Question 3

An arrow side significance is applied to the stud-weld symbol and it is used with an other side or both sides significance.

Answer 3

False

Question 4

In the stud-weld symbol, the number of stud welds is placed in parentheses ____ the symbol.

A) above
B) below
C) to the left
D) to the right

Question 5

The stud-weld symbol is always shown placed ____________________ the reference line.

Question 6

Three elements may be applied to the stud-weld symbol:____.

A) stud size, stud spacing, and the location of stud welds
B) stud size, stud spacing, and the number of stud welds
C) stud size, stud placement, and the location of stud welds
D) stud size, stud placement, and the number of stud welds

Question 7

When specifying a stud weld, the arrow of the welding symbol points to the ____.

A) surface to which the stud is to be welded
B) prepared joint
C) prepared stud
D) joint surface

Question 8

When stud welds are to be made in a straight line with unequal spacing, or in a configuration other than a straight line, the location of each stud must be dimensioned on the drawing.

Question 9

To show the location of studs to be welded in a straight line with equal center-to-center spacing, the spacing (pitch) dimension is applied on the ____________________ side of the stud-weld symbol.

Question 10

On the stud-weld symbol, the pitch is placed ____ of the symbol.

A) above
B) below
C) to the left
D) to the right

Question 11

In addition to the location of the studs to be welded, the location of the first and last stud is ____ on the drawing.

A) highlighted
B) symbolized
C) dimensioned
D) detailed

Question 12

The stud size dimension is placed to the ____________________ of the stud-weld symbol.

Question 13

The arrow on a stud-weld is shown with a break when indicating stud welds.

Question 14

The stud-weld symbol is always shown with the arrow of the welding symbol pointing to the surface to which the stud is to be welded.