Question 1

Tool capabilities vary depending on:

Accepted Answer

A)  age of tool. 
B)  user ability. 
C)  age of tool and power source. 
D)  manufacturer and power source. 
A)  age of tool. 
B)  user ability. 
C)  age of tool and power source. 
D)  manufacturer and power source. D

Question 2

What initial action is performed to ensure the use of a personnel accountability system?

Accepted Answer

A)  Stabilize the victim 
B)  Size-up the situation 
C)  Establish scene security 
D)  Communicate information 
A)  Stabilize the victim 
B)  Size-up the situation 
C)  Establish scene security 
D)  Communicate information C

Question 3

Which of the following rescue tool uses includes tools to drag materials away to free victims?

Accepted Answer

A)  Lifting 
B)  Pulling 
C)  Cutting 
D)  Stabilizing 
A)  Lifting 
B)  Pulling 
C)  Cutting 
D)  Stabilizing B

Question 4

Using your opposite hand to support the hand holding the center punch prevents:

Accepted Answer

A)  glass from breaking without warning. 
B)  glass shards from entering the vehicle. 
C)  glass from falling straight down onto victims. 
D)  the center punch from hitting the victim close to the glass. 
A)  glass from breaking without warning. 
B)  glass shards from entering the vehicle. 
C)  glass from falling straight down onto victims. 
D)  the center punch from hitting the victim close to the glass.

Question 5

During trench rescue operations exit ladders should be placed no more than_________ apart.

Accepted Answer

A)  25 feet (7.62 m) 
B)  30 feet (9.14 m) 
C)  50 feet (15.24 m) 
D)  65 feet (19.81 m) 
A)  25 feet (7.62 m) 
B)  30 feet (9.14 m) 
C)  50 feet (15.24 m) 
D)  65 feet (19.81 m)

Question 6

Which of the following BEST describes hazards specific to ice rescue operations?

Accepted Answer

A)  Victims unlikely to help with own rescue 
B)  Oxygen deficiency due to inadequate ventilation 
C)  Rescue must happen in rugged, inaccessible terrain 
D)  Hazard created by debris trapped against upstream face 
A)  Victims unlikely to help with own rescue 
B)  Oxygen deficiency due to inadequate ventilation 
C)  Rescue must happen in rugged, inaccessible terrain 
D)  Hazard created by debris trapped against upstream face

Question 7

Which of the following BEST describes what may occur if there are openings in the center of cribbing that supports a lifting bag?

Accepted Answer

A)  The bag may shift or rupture. 
B)  The bag will create an anchor point. 
C)  The bag may lose stability and lifting power. 
D)  The bag will pry the object away from the victim. 
A)  The bag may shift or rupture. 
B)  The bag will create an anchor point. 
C)  The bag may lose stability and lifting power. 
D)  The bag will pry the object away from the victim.

Question 8

When using a strut and buttress tension system, firefighters must ensure all parts have a safety margin that is:

Accepted Answer

A)  the same as the weight being secured. 
B)  in excess of the weight being secured. 
C)  within 5 pounds (2.26 kg) of the weight being secured. 
D)  within 10 pounds (4.53 kg) of the weight being secured. 
A)  the same as the weight being secured. 
B)  in excess of the weight being secured. 
C)  within 5 pounds (2.26 kg) of the weight being secured. 
D)  within 10 pounds (4.53 kg) of the weight being secured.

Question 9

If a bulb must be replaced while hot, wear_________ to prevent being burned.

Accepted Answer

A)  latex gloves 
B)  cotton gloves 
C)  leather gloves 
D)  synthetic gloves 
A)  latex gloves 
B)  cotton gloves 
C)  leather gloves 
D)  synthetic gloves

Question 10

During an elevator rescue, extrication should begin immediately if occupants:

Accepted Answer

A)  seem prone to panic. 
B)  require medical attention. 
C)  condition is medically stable. 
D)  request immediate extrication. 
A)  seem prone to panic. 
B)  require medical attention. 
C)  condition is medically stable. 
D)  request immediate extrication.

Question 11

Which of the following extrication methods is common after front-end collisions?

Accepted Answer

A)  Prying open a door 
B)  Removing a window 
C)  Displacing the dashboard 
D)  Removing the vehicle roof 
A)  Prying open a door 
B)  Removing a window 
C)  Displacing the dashboard 
D)  Removing the vehicle roof

Question 12

What type of saw is often used for delicate cutting operations?

Accepted Answer

A)  Rotary saw 
B)  Circular saw 
C)  Whizzer saw 
D)  Reciprocating saw 
A)  Rotary saw 
B)  Circular saw 
C)  Whizzer saw 
D)  Reciprocating saw

Question 13

Which of the following vehicle extrication hazards can be isolated by deactivating undeployed air bags?

Accepted Answer

A)  Fire 
B)  Traffic 
C)  Sharp objects 
D)  Blood borne pathogens 
A)  Fire 
B)  Traffic 
C)  Sharp objects 
D)  Blood borne pathogens

Question 14

What is the first step during water rescue operations size-up?

Accepted Answer

A)  Establish scene security 
B)  Decide what rescue tasks may be required 
C)  Assess the types of undercurrents on scene 
D)  Determine if incident requires rescue or recovery 
A)  Establish scene security 
B)  Decide what rescue tasks may be required 
C)  Assess the types of undercurrents on scene 
D)  Determine if incident requires rescue or recovery

Question 15

Which of the following BEST describes why plastic cribbing may be preferred over wooden cribbing?

Accepted Answer

A)  It is less expensive to buy. 
B)  It is lighter and lasts longer. 
C)  It will not slip under wet conditions. 
D)  It is rated so that quality is ensured. 
A)  It is less expensive to buy. 
B)  It is lighter and lasts longer. 
C)  It will not slip under wet conditions. 
D)  It is rated so that quality is ensured.

Question 16

Which hydraulic/electric tool is excellent for a small rapid-interventions vehicle?

Accepted Answer

A)  Shears 
B)  Spreaders 
C)  Extension rams 
D)  Combination spreader/shears 
A)  Shears 
B)  Spreaders 
C)  Extension rams 
D)  Combination spreader/shears

Question 17

Hybrid vehicles that use color-coded wiring use________ to mark high voltage wiring.

Accepted Answer

A)  red 
B)  black 
C)  green 
D)  orange 
A)  red 
B)  black 
C)  green 
D)  orange

Question 18

Which of the following passenger safety systems can be found either behind the front seat in small sports cars or in the rear window deck of convertibles?

Accepted Answer

A)  Seat belt pretensioners 
B)  Head protection systems 
C)  Extendable roll over protection systems 
D)  Supplemental passenger restraining systems 
A)  Seat belt pretensioners 
B)  Head protection systems 
C)  Extendable roll over protection systems 
D)  Supplemental passenger restraining systems

Question 19

Which of the following BEST describes the role of a Firefighter II at a technical rescue incident?

Accepted Answer

A)  Replace technical rescue team members if needed 
B)  Perform tasks identical to those of rescue team members 
C)  Observe the incident and provide assistance in the cold zone 
D)  Assist technical rescuers with tasks related to specific incidents 
A)  Replace technical rescue team members if needed 
B)  Perform tasks identical to those of rescue team members 
C)  Observe the incident and provide assistance in the cold zone 
D)  Assist technical rescuers with tasks related to specific incidents

Question 20

What rescue tool can be useful for securing vinyl coverings on roof openings?

Accepted Answer

A)  Impact tools 
B)  Come-alongs 
C)  Steel cable winch 
D)  Pneumatic nailers 
A)  Impact tools 
B)  Come-alongs 
C)  Steel cable winch 
D)  Pneumatic nailers

Exam 10: Scene Lighting, Rescue Tools, Vehicle Extrication, and Technical Rescue Firefighter II

Tool capabilities vary depending on:

What initial action is performed to ensure the use of a personnel accountability system?

Which of the following rescue tool uses includes tools to drag materials away to free victims?

Using your opposite hand to support the hand holding the center punch prevents:

During trench rescue operations exit ladders should be placed no more than_________ apart.

Which of the following BEST describes hazards specific to ice rescue operations?

Which of the following BEST describes what may occur if there are openings in the center of cribbing that supports a lifting bag?

When using a strut and buttress tension system, firefighters must ensure all parts have a safety margin that is:

If a bulb must be replaced while hot, wear_________ to prevent being burned.

During an elevator rescue, extrication should begin immediately if occupants:

Which of the following extrication methods is common after front-end collisions?

What type of saw is often used for delicate cutting operations?

Which of the following vehicle extrication hazards can be isolated by deactivating undeployed air bags?

What is the first step during water rescue operations size-up?

Which of the following BEST describes why plastic cribbing may be preferred over wooden cribbing?

Which hydraulic/electric tool is excellent for a small rapid-interventions vehicle?

Hybrid vehicles that use color-coded wiring use________ to mark high voltage wiring.

Which of the following passenger safety systems can be found either behind the front seat in small sports cars or in the rear window deck of convertibles?

Which of the following BEST describes the role of a Firefighter II at a technical rescue incident?

What rescue tool can be useful for securing vinyl coverings on roof openings?

Orientation and Fire Service History

Firefighter Safety and Health

Fire Department Communications Firefighter I

Building Construction Firefighter I

Fire Behavior

Firefighter Personal Protective Equipment

Portable Fire Extinguishers

Ropes, Webbing, and Knots

Structural Search, Victim Removal, and Firefighter Survival

Forcible Entry

Ground Ladders

Tactical Ventilation

Water Supply

Fire Hose - Firefighter I

Fire Streams Firefighter II

Fire Control Firefighter I

Loss Control

Fire Origin and Cause Determination Firefighter II

Fire Protection Systems Firefighter II

Fire and Life Safety Initiatives Firefighter II

Emergency Medical Care for Fire Department First Responders

Hazards, Behavior, and Identification of Haz Matwmd

Mitigation of Haz Matwmd Incidents

Filters