Question 1

An engineering drawing is dimensioned with the aid of

Accepted Answer

A)  dimension lines. 
B)  extension lines. 
C)  centerlines and leaders. 
D)  all of the above 
A)  dimension lines. 
B)  extension lines. 
C)  centerlines and leaders. 
D)  all of the above D

Question 2

The lines that extend from the points to which the dimension or location is to be specified are known as

Accepted Answer

A)  dimension lines. 
B)  extension lines. 
C)  leaders. 
D)  none of the above 
A)  dimension lines. 
B)  extension lines. 
C)  leaders. 
D)  none of the above B

Question 3

There are basically two concepts that you need to keep in mind when specifying dimensions in an engineering drawing:

Accepted Answer

A)  size and location. 
B)  size and material. 
C)  size and tolerance. 
D)  part number and material. 
A)  size and location. 
B)  size and material. 
C)  size and tolerance. 
D)  part number and material. A

Question 4

The number of orthographic views that you should draw to represent an object

Accepted Answer

A)  is always three. 
B)  is at least three. 
C)  is at most three. 
D)  depends on the complexity of the object. 
A)  is always three. 
B)  is at least three. 
C)  is at most three. 
D)  depends on the complexity of the object.

Question 5

Center lines, or lines of symmetry, are used to show

Accepted Answer

A)  reference locations for the machinist who will be making the part. 
B)  the visible edges of planes or the intersection of two planes. 
C)  reference locations for assembly. 
D)  where the center of holes or the center of cylinders are. 
A)  reference locations for the machinist who will be making the part. 
B)  the visible edges of planes or the intersection of two planes. 
C)  reference locations for assembly. 
D)  where the center of holes or the center of cylinders are.

Question 6

The arrows that point to a circle or a fillet for the purpose of specifying their sizes are known as

Accepted Answer

A)  dimension lines. 
B)  extension lines. 
C)  leaders. 
D)  none of the above 
A)  dimension lines. 
B)  extension lines. 
C)  leaders. 
D)  none of the above

Question 7

On an engineering drawing, what does NTS typically stand for?

Accepted Answer

A)  non-technical symbol 
B)  not to scale 
C)  nearest to scale 
D)  national trade symbol 
A)  non-technical symbol 
B)  not to scale 
C)  nearest to scale 
D)  national trade symbol

Question 8

In a sectional view, the solid portion of the view is marked with

Accepted Answer

A)  cross-hatching. 
B)  shading. 
C)  hidden lines. 
D)  rendering. 
A)  cross-hatching. 
B)  shading. 
C)  hidden lines. 
D)  rendering.

Question 9

The view that shows the solid portions and the voids within the object are known as

Accepted Answer

A)  isometric view. 
B)  orthographic view. 
C)  standard view. 
D)  sectional view. 
A)  isometric view. 
B)  orthographic view. 
C)  standard view. 
D)  sectional view.

Question 10

The view that shows the three dimensions of an object in a single view is known as

Accepted Answer

A)  isometric view. 
B)  orthographic view. 
C)  standard view. 
D)  normal view. 
A)  isometric view. 
B)  orthographic view. 
C)  standard view. 
D)  normal view.

Question 11

Which of the following are components of a sectional view?

Accepted Answer

A)  cutting plane 
B)  directional arrow 
C)  cross-hatching 
D)  all of the above 
A)  cutting plane 
B)  directional arrow 
C)  cross-hatching 
D)  all of the above

Question 12

CNC machines are often used to make parts directly from solid modeling software. What does CNC stand for?

Accepted Answer

A)  central navigation center 
B)  computer navigation center 
C)  computer nominally controlled 
D)  computer numerically controlled 
A)  central navigation center 
B)  computer navigation center 
C)  computer nominally controlled 
D)  computer numerically controlled

Question 13

AutoCAD, IDEAS, and Pro-E are examples of

Accepted Answer

A)  solid modeling software. 
B)  civil engineering drawings. 
C)  electrical drawings. 
D)  electronic drawings. 
A)  solid modeling software. 
B)  civil engineering drawings. 
C)  electrical drawings. 
D)  electronic drawings.

Question 14

Which three views are most commonly used to describe most objects?

Accepted Answer

A)  top, front, and back 
B)  front, bottom, and left 
C)  top, back, and right 
D)  top, front, and right 
A)  top, front, and back 
B)  front, bottom, and left 
C)  top, back, and right 
D)  top, front, and right

Question 15

Solid lines are used to show

Accepted Answer

A)  reference locations for the machinist who will be making the part. 
B)  the visible edges of planes or the intersection of two planes. 
C)  optiona $\text { start/stop }$ op locations. 
D)  reference locations for assembly. 
A)  reference locations for the machinist who will be making the part. 
B)  the visible edges of planes or the intersection of two planes. 
C)  optiona $\text { start/stop }$ op locations. 
D)  reference locations for assembly.

Question 16

Hidden lines are used to show

Accepted Answer

A)  the intersection of two planes that are not visible from the direction you are looking. 
B)  reference locations for the machinist who will be making the part. 
C)  optiona $\text { start/stop }$ op locations. 
D)  reference locations for assembly. 
A)  the intersection of two planes that are not visible from the direction you are looking. 
B)  reference locations for the machinist who will be making the part. 
C)  optiona $\text { start/stop }$ op locations. 
D)  reference locations for assembly.

Question 17

A "language" used by engineers to convey their ideas, their solutions to problems, or analyses of certain situations is known as

Accepted Answer

A)  drawings. 
B)  symbols. 
C)  calculations. 
D)  technical reports. 
A)  drawings. 
B)  symbols. 
C)  calculations. 
D)  technical reports.

Question 18

The views that show what an object's projection looks like when seen from the top, the front, and the side are known as

Accepted Answer

A)  isometric views. 
B)  orthographic views. 
C)  standard views. 
D)  normal views. 
A)  isometric views. 
B)  orthographic views. 
C)  standard views. 
D)  normal views.

Question 19

Engineering drawings provide information about

Accepted Answer

A)  size, shape, and material of a product. 
B)  dimensions and tolerances. 
C)  surface finish and part number(s). 
D)  all of the above 
A)  size, shape, and material of a product. 
B)  dimensions and tolerances. 
C)  surface finish and part number(s). 
D)  all of the above

Question 20

The lines that provide information on the size of the object - for example, how wide it is and how long it is, are known as

Accepted Answer

A)  dimension lines. 
B)  extension lines. 
C)  leaders. 
D)  none of the above 
A)  dimension lines. 
B)  extension lines. 
C)  leaders. 
D)  none of the above

An engineering drawing is dimensioned with the aid of

The lines that extend from the points to which the dimension or location is to be specified are known as

There are basically two concepts that you need to keep in mind when specifying dimensions in an engineering drawing:

The number of orthographic views that you should draw to represent an object

Center lines, or lines of symmetry, are used to show

The arrows that point to a circle or a fillet for the purpose of specifying their sizes are known as

On an engineering drawing, what does NTS typically stand for?

In a sectional view, the solid portion of the view is marked with

The view that shows the solid portions and the voids within the object are known as

The view that shows the three dimensions of an object in a single view is known as

Which of the following are components of a sectional view?

CNC machines are often used to make parts directly from solid modeling software. What does CNC stand for?

AutoCAD, IDEAS, and Pro-E are examples of

Which three views are most commonly used to describe most objects?

Solid lines are used to show

Hidden lines are used to show

A "language" used by engineers to convey their ideas, their solutions to problems, or analyses of certain situations is known as

The views that show what an object's projection looks like when seen from the top, the front, and the side are known as

Engineering drawings provide information about

The lines that provide information on the size of the object - for example, how wide it is and how long it is, are known as

Introduction to the Engineering Profession

Preparing for an Engineering Career

Introduction to Engineering Design

Engineering Communication

Engineering Ethics

Fundamental Dimensions and Units

Length and Length-Related Variables in Engineering

Time and Time-Related Variables in Engineering

Mass and Mass-Related Variables in Engineering

Force and Force-Related Variables in Engineering

Temperature and Temperature-Related Variables in Engineering

Electric Current and Related Variables in Engineering

Energy and Power

Computational Engineering Tools: Electronic Spreadsheets

Computational Engineering Tools: Matlab

Engineering Materials

Mathematics in Engineering

Probability and Statistics in Engineering

Engineering Economics

Filters

Exam 16: Engineering Drawings and Symbols

An engineering drawing is dimensioned with the aid of

The lines that extend from the points to which the dimension or location is to be specified are known as

There are basically two concepts that you need to keep in mind when specifying dimensions in an engineering drawing:

The number of orthographic views that you should draw to represent an object

Center lines, or lines of symmetry, are used to show

The arrows that point to a circle or a fillet for the purpose of specifying their sizes are known as

On an engineering drawing, what does NTS typically stand for?

In a sectional view, the solid portion of the view is marked with

The view that shows the solid portions and the voids within the object are known as

The view that shows the three dimensions of an object in a single view is known as

Which of the following are components of a sectional view?

CNC machines are often used to make parts directly from solid modeling software. What does CNC stand for?

AutoCAD, IDEAS, and Pro-E are examples of

Which three views are most commonly used to describe most objects?

Solid lines are used to show

Hidden lines are used to show

A "language" used by engineers to convey their ideas, their solutions to problems, or analyses of certain situations is known as

The views that show what an object's projection looks like when seen from the top, the front, and the side are known as

Engineering drawings provide information about

The lines that provide information on the size of the object - for example, how wide it is and how long it is, are known as

Introduction to the Engineering Profession

Preparing for an Engineering Career

Introduction to Engineering Design

Engineering Communication

Engineering Ethics

Fundamental Dimensions and Units

Length and Length-Related Variables in Engineering

Time and Time-Related Variables in Engineering

Mass and Mass-Related Variables in Engineering

Force and Force-Related Variables in Engineering

Temperature and Temperature-Related Variables in Engineering

Electric Current and Related Variables in Engineering

Energy and Power

Computational Engineering Tools: Electronic Spreadsheets

Computational Engineering Tools: Matlab

Engineering Materials

Mathematics in Engineering

Probability and Statistics in Engineering

Engineering Economics

Filters