Exam 3: General Theories of Operation
Exam 1: Drive Train Basics178 Questions
Exam 2: Drive Train Theory116 Questions
Exam 3: General Theories of Operation107 Questions
Exam 4: Transmission Electronics132 Questions
Exam 5: Transmission Designs92 Questions
Exam 6: Torque Converters and Oil Pumps83 Questions
Exam 7: Hydraulic and Electronic Controls74 Questions
Exam 8: Gears and Shafts61 Questions
Exam 9: Reaction and Friction Units40 Questions
Exam 10: Common Automatic Transmissions60 Questions
Select questions type
A(n)____________________ regulates fluid pressure in response to a change in engine load.
(Short Answer)
4.9/5
(44)
A reduction ratio results in decreased torque with a reduced speed.
(True/False)
4.8/5
(41)
Technician A says that any electronic problems, as indicated by fault codes retrieved by a scan tool, should be corrected before continuing with the diagnosis. Technician B says that the electronic problems will be corrected when the transmission repair is completed. Who is correct?
(Multiple Choice)
5.0/5
(38)
A(n)____________________ is a hydraulic link between the engine and the transmission or transaxle.
(Short Answer)
4.8/5
(36)
An automatic transmission or transaxle receives engine power through which part?
(Multiple Choice)
4.8/5
(37)
A clunking noise during acceleration may be the result of a worn CV joint.
(True/False)
4.8/5
(42)
The ____________________ seals and allows fluid flow through the valve body.
(Short Answer)
4.8/5
(39)
A(n)____________________ holds components of the planetary gear set.
(Short Answer)
4.8/5
(41)
The ____________________ delivers power from a transmission or transaxle.
(Short Answer)
4.8/5
(33)
Describe the components of a planetary gear set and what different speeds it can provide.
(Essay)
4.8/5
(43)
List the three types of valves and their functions in the valve body.
(Essay)
4.8/5
(45)
The Lepelletier design of planetary gear sets are used in some six- and seven-speed transmissions.
(True/False)
4.9/5
(37)
A slipping forward clutch may cause a delay in the shift of all forward gears.
(True/False)
4.8/5
(36)
The ____________________ regulates and directs fluid flow using a poppet.
(Short Answer)
4.8/5
(32)
In order to properly diagnose a transmission complaint, it is essential that you gather as much information from the customer as possible.
(True/False)
4.7/5
(42)
____________________ regulate and direct fluid flow using a steel or rubber ball.
(Short Answer)
4.8/5
(39)
Technician A says to reduce the chance of slipping under heavy load, increasing the pressure will hold the planetary control units tightly. Technician B says a throttle cable or electronics are used to sense engine load in a transmission or transaxle not equipped with a vacuum modulator. Who is correct?
(Multiple Choice)
4.8/5
(36)
Showing 61 - 80 of 107
Filters
- Essay(0)
- Multiple Choice(0)
- Short Answer(0)
- True False(0)
- Matching(0)