Exam 9: Reaction and Friction Units

Technician A says a dog clutch utilizes roller bearings held in place by springs to separate the inner and outer race of the clutch assembly. Technician B says one-way overrunning clutches can be either roller type or sprag type. Who is correct?

(Multiple Choice)

4.8/5

(39)

Question 21

What determines shift feel in a clutch-to-clutch shifting transmission?

(Essay)

4.8/5

(32)

Question 22

List the advantages to using a dog clutch.

(Essay)

4.8/5

(34)

Question 23

One-way overrunning clutches are purely mechanical devices.

(True/False)

4.9/5

(39)

Question 24

A(n)____________________ is the pivot point for lever.

(Short Answer)

4.8/5

(39)

Question 25

Technician A says to check for internal fluid leaks, a technician can perform an air test. Technician B says servo action can be checked by performing an air test. Who is correct?

(Multiple Choice)

4.9/5

(40)

Question 26

Technician A says the dog clutch is used on the nine- speed automatic from ZF. Technician B says the dog clutch is used to lock two components together through the use of a multiple- disc clutch. Who is correct?

(Multiple Choice)

4.8/5

(36)

Question 27

A band can be used to drive a planetary member.

(True/False)

4.9/5

(35)

Question 28

When multiple-disc packs lock two members of a planetary gearset together, it is a _______________device.

(Short Answer)

4.9/5

(36)

Question 29

Define a servo assembly and its function.

(Essay)

4.8/5

(34)

Question 30

A(n)____________________ is a band that is split with overlapping ends.

(Short Answer)

4.9/5

(35)

Question 31

Some reaction units are applied by hydraulically operated piston assembly.

(True/False)

4.8/5

(39)

Question 32

List the disadvantages to using a dog clutch.

(Essay)

4.9/5

(42)

Question 33

A drum is connected to a member of the planetary gear set.

(True/False)

4.7/5

(42)

Question 34

Shift feel is affected by fluid type.

(True/False)

4.9/5

(42)

Question 35

What is CVI (clutch volume indexing)?

(Essay)

4.8/5

(42)

Question 36

A servo is a hydraulically operated piston assembly used to apply a band.

(True/False)

4.9/5

(37)

Question 37

Technician A says seals hold in the hydraulic pressure when the clutch pack is released. Technician B says in a typical pack, the apply piston at the rear of the drum is held in place by the return springs and a spring retainer secured by a snap ring. Who is correct?

(Multiple Choice)

4.9/5

(34)

Question 38

____________________ is part of an adaptive learning strategy that is an important aid when diagnosing a slippage problem. This data can also be used as an indication of the amount of friction material wear.

(Short Answer)

4.9/5

(37)

Question 39

Technician A says that the springs used in accumulator and servo assemblies have a specified tension. Technician B says that improper spring tension will affect shift quality. Who is correct?

(Multiple Choice)

4.9/5

(29)

Question 40

Showing 21 - 40 of 40

Technician A says a dog clutch utilizes roller bearings held in place by springs to separate the inner and outer race of the clutch assembly. Technician B says one-way overrunning clutches can be either roller type or sprag type. Who is correct?

What determines shift feel in a clutch-to-clutch shifting transmission?

List the advantages to using a dog clutch.

One-way overrunning clutches are purely mechanical devices.

A(n)____________________ is the pivot point for lever.

Technician A says to check for internal fluid leaks, a technician can perform an air test. Technician B says servo action can be checked by performing an air test. Who is correct?

Technician A says the dog clutch is used on the nine- speed automatic from ZF. Technician B says the dog clutch is used to lock two components together through the use of a multiple- disc clutch. Who is correct?

A band can be used to drive a planetary member.

When multiple-disc packs lock two members of a planetary gearset together, it is a _______________device.

Define a servo assembly and its function.

A(n)____________________ is a band that is split with overlapping ends.

Some reaction units are applied by hydraulically operated piston assembly.

List the disadvantages to using a dog clutch.

A drum is connected to a member of the planetary gear set.

Shift feel is affected by fluid type.

What is CVI (clutch volume indexing)?

A servo is a hydraulically operated piston assembly used to apply a band.

Technician A says seals hold in the hydraulic pressure when the clutch pack is released. Technician B says in a typical pack, the apply piston at the rear of the drum is held in place by the return springs and a spring retainer secured by a snap ring. Who is correct?

____________________ is part of an adaptive learning strategy that is an important aid when diagnosing a slippage problem. This data can also be used as an indication of the amount of friction material wear.

Technician A says that the springs used in accumulator and servo assemblies have a specified tension. Technician B says that improper spring tension will affect shift quality. Who is correct?

Drive Train Basics

Drive Train Theory

General Theories of Operation

Transmission Electronics

Transmission Designs

Torque Converters and Oil Pumps

Hydraulic and Electronic Controls

Gears and Shafts

Common Automatic Transmissions

Filters

Exam 9: Reaction and Friction Units

Technician A says a dog clutch utilizes roller bearings held in place by springs to separate the inner and outer race of the clutch assembly. Technician B says one-way overrunning clutches can be either roller type or sprag type. Who is correct?

​What determines shift feel in a clutch-to-clutch shifting transmission?

​List the advantages to using a dog clutch.

One-way overrunning clutches are purely mechanical devices.

A(n)____________________ is the pivot point for lever.

Technician A says to check for internal fluid leaks, a technician can perform an air test. Technician B says servo action can be checked by performing an air test. Who is correct?

Technician A says the dog clutch is used on the nine- speed automatic from ZF. Technician B says the dog clutch is used to lock two components together through the use of a multiple- disc clutch. Who is correct?

A band can be used to drive a planetary member.

​When multiple-disc packs lock two members of a planetary gearset together, it is a _______________device.

Define a servo assembly and its function.

A(n)____________________ is a band that is split with overlapping ends.

Some reaction units are applied by hydraulically operated piston assembly.

List the disadvantages to using a dog clutch.​

A drum is connected to a member of the planetary gear set.

Shift feel is affected by fluid type.

​What is CVI (clutch volume indexing)?

A servo is a hydraulically operated piston assembly used to apply a band.

​Technician A says seals hold in the hydraulic pressure when the clutch pack is released. Technician B says in a typical pack, the apply piston at the rear of the drum is held in place by the return springs and a spring retainer secured by a snap ring. Who is correct?

____________________ is part of an adaptive learning strategy that is an important aid when diagnosing a slippage problem. This data can also be used as an indication of the amount of friction material wear.

Technician A says that the springs used in accumulator and servo assemblies have a specified tension. Technician B says that improper spring tension will affect shift quality. Who is correct?

Drive Train Basics

Drive Train Theory

General Theories of Operation

Transmission Electronics

Transmission Designs

Torque Converters and Oil Pumps

Hydraulic and Electronic Controls

Gears and Shafts

Common Automatic Transmissions

Filters

What determines shift feel in a clutch-to-clutch shifting transmission?

List the advantages to using a dog clutch.

When multiple-disc packs lock two members of a planetary gearset together, it is a _______________device.

List the disadvantages to using a dog clutch.

What is CVI (clutch volume indexing)?

Technician A says seals hold in the hydraulic pressure when the clutch pack is released. Technician B says in a typical pack, the apply piston at the rear of the drum is held in place by the return springs and a spring retainer secured by a snap ring. Who is correct?