Question 1

The total amperage in a parallel circuit will be the sum of the individual circuits.

Accepted Answer

A) True 
 B)False

Question 2

Technician A says when a magnetic field is moved across a conductor, voltage will be induced in the conductor. Technician B says when a conductor is moved across a magnetic field, voltage will be induced in the conductor. Who is correct?

Accepted Answer

A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B 
A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B

Question 3

The display of a DVOM is indicating 236 mV. Which of the following is the same as this value?

Accepted Answer

A)  0.236 millivolts 
B)  0.236 volts 
C)  23.6 volts 
D)  0.000236 volts 
A)  0.236 millivolts 
B)  0.236 volts 
C)  23.6 volts 
D)  0.000236 volts

Question 4

Technician A says an atom that loses or gains one electron is balanced. Technician B says an atom that loses or gains one electron is called a charged particle or ion. Who is correct?

Accepted Answer

A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B 
A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B

Question 5

Current is measured in what unit?

Accepted Answer

The answer of Current is measured in what unit?...

Question 6

Current is defined as?

Accepted Answer

The answer of Current is defined as?...

Question 7

What information should be included on a work order?

Accepted Answer

Customer information, vehicle

Question 8

In a parallel circuit, there is more than one path for electricity to follow.

Accepted Answer

A) True 
 B)False

Question 9

An individual who passes a particular ASE-certification examination becomes certified in that test area.

Accepted Answer

A) True 
 B)False

Question 10

Logic probes can be used only on ____ circuits.

Accepted Answer

A)  digital 
B)  analog 
C)  LCD 
D)  insulated 
A)  digital 
B)  analog 
C)  LCD 
D)  insulated

Question 11

What is an "Insulation Tester" used for?

Accepted Answer

It is an electrical meter used

Question 12

According to Ohm's Law, what is the resistance when 1 volt pushes 1 ampere of current through a conductor?

Accepted Answer

A)  0 ohm 
B)  1 ohm 
C)  1 watt 
D)  1 coulomb 
A)  0 ohm 
B)  1 ohm 
C)  1 watt 
D)  1 coulomb

Question 13

Resistance is defined as?

Accepted Answer

Opposition

Question 14

The best way of determining if a switch is faulty is being discussed. Technician A says to use an ohmmeter with the switch isolated to test continuity through the switch. Technician B says to use a jumper wire to bypass the switch in order to operate the various circuits controlled by the switch. Who is correct?

Accepted Answer

A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B 
A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B

Question 15

Technician A says a 9-volt memory keeper will keep clock and radio setting while replacing a battery. Technician B says a memory keeper should be used when servicing an air bag circuit. Who is correct?

Accepted Answer

A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B 
A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B

Question 16

Technician A says amperage is the same at any point in a series circuit. Technician B says the total resistance is the sum of all resistance in a series circuit. Who is correct?

Accepted Answer

A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B 
A)  Technician A only 
B)  Technician B only 
C)  Both Technician A and B 
D)  Neither Technician A nor B

Question 17

The frame of the vehicle is normally attached to the positive battery post.

Accepted Answer

A) True 
 B)False

Question 18

Describe the difference between insulators, conductors, and semiconductors.

Accepted Answer

The difference is th

Question 19

A test light is ideal for checking for voltage on a low-current low-power circuit.

Accepted Answer

A) True 
 B)False

Question 20

All of the following statements about voltage drops are true except:

Accepted Answer

A)  Voltage drop can be measured with a voltmeter. 
B)  Voltage drop is the conversion of electrical energy into another form energy form. 
C)  All of the voltage from the source must be dropped before it returns to the source. 
D)  Corrosion is not a contributor to voltage drop. 
A)  Voltage drop can be measured with a voltmeter. 
B)  Voltage drop is the conversion of electrical energy into another form energy form. 
C)  All of the voltage from the source must be dropped before it returns to the source. 
D)  Corrosion is not a contributor to voltage drop.

The total amperage in a parallel circuit will be the sum of the individual circuits.

Technician A says when a magnetic field is moved across a conductor, voltage will be induced in the conductor. Technician B says when a conductor is moved across a magnetic field, voltage will be induced in the conductor. Who is correct?

The display of a DVOM is indicating 236 mV. Which of the following is the same as this value?

Technician A says an atom that loses or gains one electron is balanced. Technician B says an atom that loses or gains one electron is called a charged particle or ion. Who is correct?

Current is measured in what unit?

Current is defined as?

What information should be included on a work order?

In a parallel circuit, there is more than one path for electricity to follow.

An individual who passes a particular ASE-certification examination becomes certified in that test area.

Logic probes can be used only on ____ circuits.

What is an "Insulation Tester" used for?

According to Ohm's Law, what is the resistance when 1 volt pushes 1 ampere of current through a conductor?

Resistance is defined as?

Technician A says a 9-volt memory keeper will keep clock and radio setting while replacing a battery. Technician B says a memory keeper should be used when servicing an air bag circuit. Who is correct?

Technician A says amperage is the same at any point in a series circuit. Technician B says the total resistance is the sum of all resistance in a series circuit. Who is correct?

The frame of the vehicle is normally attached to the positive battery post.

Describe the difference between insulators, conductors, and semiconductors.

A test light is ideal for checking for voltage on a low-current low-power circuit.

All of the following statements about voltage drops are true except:

Introduction to Automotive Electrical and Electronic Systems Safety

Electrical and Electronic Componentsbasic Electrical Troubleshooting and Service

Wiring and Circuit Diagramswiring Repair and Reading Circuit Diagrams

Automotive Batteriesbattery Diagnosis and Service

Starting Systems and Motor Designsstarting System Diagnosis and Service

Charging Systemscharging System Testing and Service

Introduction to the Body Computerbody Computer System Diagnosis

Computer Inputssensor Diagnostic Routines

Vehicle Communication Networksvehicle Multiplexing Diagnostics

Lighting Circuitslighting Circuits Repair and Diagnosis

Instrumentation and Warning Lampsinstrumentation and Warning Lamp System Diagnosis and Repair

Accessorieselectrical Accessories Diagnosis and Repair

Radio Frequency and Infotainment Systemsservicing Radio Frequency and Infotainment Systems

Passive Restraint and Vehicle Safety Systemsservicing Passive Restraint and Vehicle Safety Systems

Vehicles With Alternative Power Sourceshybrid and High-Voltage System Service

Filters

Exam 2: Basic Theoriesspecial Tools and Procedures

The total amperage in a parallel circuit will be the sum of the individual circuits.

Technician A says when a magnetic field is moved across a conductor, voltage will be induced in the conductor. Technician B says when a conductor is moved across a magnetic field, voltage will be induced in the conductor. Who is correct?

The display of a DVOM is indicating 236 mV. Which of the following is the same as this value?

Technician A says an atom that loses or gains one electron is balanced. Technician B says an atom that loses or gains one electron is called a charged particle or ion. Who is correct?

Current is measured in what unit?

Current is defined as?

What information should be included on a work order?

In a parallel circuit, there is more than one path for electricity to follow.

An individual who passes a particular ASE-certification examination becomes certified in that test area.

Logic probes can be used only on ____ circuits.

What is an "Insulation Tester" used for?

According to Ohm's Law, what is the resistance when 1 volt pushes 1 ampere of current through a conductor?

Resistance is defined as?

Technician A says a 9-volt memory keeper will keep clock and radio setting while replacing a battery. Technician B says a memory keeper should be used when servicing an air bag circuit. Who is correct?

Technician A says amperage is the same at any point in a series circuit. Technician B says the total resistance is the sum of all resistance in a series circuit. Who is correct?

The frame of the vehicle is normally attached to the positive battery post.

Describe the difference between insulators, conductors, and semiconductors.

A test light is ideal for checking for voltage on a low-current low-power circuit.

All of the following statements about voltage drops are true except:

Introduction to Automotive Electrical and Electronic Systems Safety

Electrical and Electronic Componentsbasic Electrical Troubleshooting and Service

Wiring and Circuit Diagramswiring Repair and Reading Circuit Diagrams

Automotive Batteriesbattery Diagnosis and Service

Starting Systems and Motor Designsstarting System Diagnosis and Service

Charging Systemscharging System Testing and Service

Introduction to the Body Computerbody Computer System Diagnosis

Computer Inputssensor Diagnostic Routines

Vehicle Communication Networksvehicle Multiplexing Diagnostics

Lighting Circuitslighting Circuits Repair and Diagnosis

Instrumentation and Warning Lampsinstrumentation and Warning Lamp System Diagnosis and Repair

Accessorieselectrical Accessories Diagnosis and Repair

Radio Frequency and Infotainment Systemsservicing Radio Frequency and Infotainment Systems

Passive Restraint and Vehicle Safety Systemsservicing Passive Restraint and Vehicle Safety Systems

Vehicles With Alternative Power Sourceshybrid and High-Voltage System Service

Filters