Question 1

____ allows IPv6 routers and hosts to communicate across IPv4 networks.

Accepted Answer

A) 6to4 
B) DHCP 
C) ARPANET 
D) ISATAP 
A) 6to4 
B) DHCP 
C) ARPANET 
D) ISATAP D

Question 2

A ____ is the most basic of the hardware devices that interconnect multiple nodes.

Accepted Answer

A) bridge 
B) hub 
C) repeater 
D) router 
A) bridge 
B) hub 
C) repeater 
D) router B

Question 3

____ should always be implemented with a client-based stateful firewall such as the Windows Firewall in Windows Server 2008.

Accepted Answer

A) 6to4 
B) Teredo 
C) NAT 
D) ISATAP 
A) 6to4 
B) Teredo 
C) NAT 
D) ISATAP B

Question 4

The Application layer of the OSI model is responsible for establishing process-to-process communications between networked hosts.

Accepted Answer

A) True 
 B)False

Question 5

____________________ are responsible for forwarding packets between subnets, or networks with differing IP addressing schemes.

Accepted Answer

The answer of ____________________ are responsible for forwarding packets between...

Question 6

____ is a mechanism used in IPv4 networks for hiding a private IP network behind a public IP address.

Accepted Answer

A) 6to4 
B) Teredo 
C) NAT 
D) ISATAP 
A) 6to4 
B) Teredo 
C) NAT 
D) ISATAP

Question 7

A(n)____ is a private network that interconnects one or more subnets using high-speed network connections.

Accepted Answer

A) IP 
B) LAN 
C) NIC 
D) MAC 
A) IP 
B) LAN 
C) NIC 
D) MAC

Question 8

What are the rules provided by IPv6 that allows you to shorten addresses?

Accepted Answer

IPv6 provides the following rules you ca

Question 9

Match between columns
                        Premises: Uses source and destination addresses that are 128 bits, or 16 bytes, in length.
Works by sending an ICMP echo request packet to the target.
Uses physical cables to connect network devices.
A document that describes the specifications for a recommended technology.
Represented by either a 1 or a 0. 1
The basis for the Internet, the World Wide Web, and almost all networks.
Deals with the limitations of classful addressing by allowing the allocation of IP addresses based on need, not general classification.
By design, cannot route traffic based on IP addresses.
Connect one or more network segments.

Accepted Answer

The Answer of Ping and Switches and IPv6 and TCP/IP is...

Question 10

____ categorizes networks based on the physical and logical relationship among devices.

Accepted Answer

A) Network protocol 
B) Network topology 
C) Network layout 
D) Network architecture 
A) Network protocol 
B) Network topology 
C) Network layout 
D) Network architecture

Question 11

____ is the process of creating multiple smaller networks, or subnets, from an IP network address.

Accepted Answer

A) CIDR 
B) Autoconfguration 
C) ISATAP 
D) Subnetting 
A) CIDR 
B) Autoconfguration 
C) ISATAP 
D) Subnetting

Question 12

The term ____________________ describes the amount of data that can travel from one network point to another within a specified time.

Accepted Answer

The answer of The term ____________________ describes the amount of...

Question 13

A(n)_________________________ is a group of networks spread across different geographic areas.

Accepted Answer

WAN,wide a

Question 14

A ____ is a unit of data transferred between a sender and receiver on a network.

Accepted Answer

A) frame 
B) hub 
C) repeater 
D) router 
A) frame 
B) hub 
C) repeater 
D) router

Question 15

____ allows IPv6 hosts to communicate over IPv4 networks that use NAT.

Accepted Answer

A) 6to4 
B) Teredo 
C) DHCP 
D) ISATAP 
A) 6to4 
B) Teredo 
C) DHCP 
D) ISATAP

Question 16

A ____ is a group of protocols that work together to provide network services.

Accepted Answer

A) protocol suite 
B) frame 
C) bridge 
D) switch 
A) protocol suite 
B) frame 
C) bridge 
D) switch

Question 17

NICs can provide access to fiber-optic, wireless LAN, or Ethernet networks.

Accepted Answer

A) True 
 B)False

Question 18

What is the difference between ipconfig and ping?

Accepted Answer

Ipconfig displays the current IP configu

Question 19

____ performs local and remote network configuration tasks.

Accepted Answer

A) CIDR 
B) RIP 
C) netsh 
D) ipconfig 
A) CIDR 
B) RIP 
C) netsh 
D) ipconfig

Question 20

What is the difference between the following ICMPv6 messages: router solicitation and router advertisement?

Accepted Answer

Router solicitation - Request

____ allows IPv6 routers and hosts to communicate across IPv4 networks.

A ____ is the most basic of the hardware devices that interconnect multiple nodes.

____ should always be implemented with a client-based stateful firewall such as the Windows Firewall in Windows Server 2008.

The Application layer of the OSI model is responsible for establishing process-to-process communications between networked hosts.

____________________ are responsible for forwarding packets between subnets, or networks with differing IP addressing schemes.

____ is a mechanism used in IPv4 networks for hiding a private IP network behind a public IP address.

A(n)____ is a private network that interconnects one or more subnets using high-speed network connections.

What are the rules provided by IPv6 that allows you to shorten addresses?

____ categorizes networks based on the physical and logical relationship among devices.

____ is the process of creating multiple smaller networks, or subnets, from an IP network address.

The term ____________________ describes the amount of data that can travel from one network point to another within a specified time.

A(n)_________________________ is a group of networks spread across different geographic areas.

A ____ is a unit of data transferred between a sender and receiver on a network.

____ allows IPv6 hosts to communicate over IPv4 networks that use NAT.

A ____ is a group of protocols that work together to provide network services.

NICs can provide access to fiber-optic, wireless LAN, or Ethernet networks.

What is the difference between ipconfig and ping?

____ performs local and remote network configuration tasks.

What is the difference between the following ICMPv6 messages: router solicitation and router advertisement?

Introduction to Windows Server 2008

Installing Windows Server 2008

Installing and Configuring the Dynamic Host Configuration Protocol

Introduction to Dns in Windows Server 2008

Managing and Administering Dns in Windows Server 2008

Configuring File Services in Windows Server 2008

Introduction to Printers in a Windows Server 2008 Network

Network Policy and Access Services in Windows Server 2008

Securing Windows Server 2008

Managing and Monitoring a Windows Server 2008 Network

Filters

Exam 3: Networking With Windows Server 2008

____ allows IPv6 routers and hosts to communicate across IPv4 networks.

A ____ is the most basic of the hardware devices that interconnect multiple nodes.

____ should always be implemented with a client-based stateful firewall such as the Windows Firewall in Windows Server 2008.

The Application layer of the OSI model is responsible for establishing process-to-process communications between networked hosts.

____________________ are responsible for forwarding packets between subnets, or networks with differing IP addressing schemes.

____ is a mechanism used in IPv4 networks for hiding a private IP network behind a public IP address.

A(n)____ is a private network that interconnects one or more subnets using high-speed network connections.

What are the rules provided by IPv6 that allows you to shorten addresses?

____ categorizes networks based on the physical and logical relationship among devices.

____ is the process of creating multiple smaller networks, or subnets, from an IP network address.

The term ____________________ describes the amount of data that can travel from one network point to another within a specified time.

A(n)_________________________ is a group of networks spread across different geographic areas.

A ____ is a unit of data transferred between a sender and receiver on a network.

____ allows IPv6 hosts to communicate over IPv4 networks that use NAT.

A ____ is a group of protocols that work together to provide network services.

NICs can provide access to fiber-optic, wireless LAN, or Ethernet networks.

What is the difference between ipconfig and ping?

____ performs local and remote network configuration tasks.

What is the difference between the following ICMPv6 messages: router solicitation and router advertisement?

Introduction to Windows Server 2008

Installing Windows Server 2008

Installing and Configuring the Dynamic Host Configuration Protocol

Introduction to Dns in Windows Server 2008

Managing and Administering Dns in Windows Server 2008

Configuring File Services in Windows Server 2008

Introduction to Printers in a Windows Server 2008 Network

Network Policy and Access Services in Windows Server 2008

Securing Windows Server 2008

Managing and Monitoring a Windows Server 2008 Network

Filters