Question 1

Which of the following is a term given to the software component in the operating system that connects to the SAN device via iSCSI?

Accepted Answer

A)  iSCSI target 
B)  iSCSI initiator 
C)  HBA 
D)  MPIO 
A)  iSCSI target 
B)  iSCSI initiator 
C)  HBA 
D)  MPIO B

Question 2

Which of the following RAID level configurations is not supported by Windows Server 2019?

Accepted Answer

A)  RAID level 0 
B)  RAID level 1 
C)  RAID level 2 
D)  RAID level 5 
A)  RAID level 0 
B)  RAID level 1 
C)  RAID level 2 
D)  RAID level 5 C

Question 3

The modern partition table is called the Master Boot Record (MBR) and uses storage devices that are larger than 2 TB.

Accepted Answer

A) True 
 B)False  False

Question 4

You are asked to create seven partitions in a storage device that uses an MBR. The device already has two partitions. However, you are also told that you cannot create more than a certain number of partitions on the storage device using an MBR. What would your next step be?

Accepted Answer

A)  Use the drive letters A and B to label the partitions 
B)  Create the partitions and label one of the partitions as extended 
C)  Use a storage device that is more than 7 TB in size and uses an MBR 
D)  Convert the device to GPT 
A)  Use the drive letters A and B to label the partitions 
B)  Create the partitions and label one of the partitions as extended 
C)  Use a storage device that is more than 7 TB in size and uses an MBR 
D)  Convert the device to GPT

Question 5

How do you create a RAID level 1 volume with two disks in the Disk Management tool?

Accepted Answer

A)  Right-click on the disk that you want to configure as a RAID volume and then click New Mirrored Volume to create a RAID level 1 volume with two disks 
B)  Right-click on the disk that you want to configure as a RAID volume and then click New Spanned Volume to create a RAID level 1 volume with two disks 
C)  Right-click on the disk that you want to configure as a RAID volume and then click New Striped Volume to create a RAID level 1 volume with two disks 
D)  Right-click on the disk that you want to configure as a RAID volume and then click Shrink Volume to create a RAID level 1 volume with two disks 
A)  Right-click on the disk that you want to configure as a RAID volume and then click New Mirrored Volume to create a RAID level 1 volume with two disks 
B)  Right-click on the disk that you want to configure as a RAID volume and then click New Spanned Volume to create a RAID level 1 volume with two disks 
C)  Right-click on the disk that you want to configure as a RAID volume and then click New Striped Volume to create a RAID level 1 volume with two disks 
D)  Right-click on the disk that you want to configure as a RAID volume and then click Shrink Volume to create a RAID level 1 volume with two disks

Question 6

Sonia is configuring a RAID level 5 array with five disks. Each disk has the capacity to store 3 TB of data. What is the total storage size that Sonia can use to store data?

Accepted Answer

A)  3 TB 
B)  8 TB 
C)  12 TB 
D)  15 TB 
A)  3 TB 
B)  8 TB 
C)  12 TB 
D)  15 TB

Question 7

Which of the following statements is true of SAN devices?

Accepted Answer

A)  SAN devices are the same as network-attached storage. 
B)  SAN devices use SAN protocols to manage and format filesystems. 
C)  SAN devices use hardware RAID externally to provide fault tolerance for the storage device that they contain. 
D)  SAN devices are functionally like an external USB drive. 
A)  SAN devices are the same as network-attached storage. 
B)  SAN devices use SAN protocols to manage and format filesystems. 
C)  SAN devices use hardware RAID externally to provide fault tolerance for the storage device that they contain. 
D)  SAN devices are functionally like an external USB drive.

Question 8

Nadia uses the Disk Management tool to create a simple volume in one of the disks. She specifies the simple volume size and chooses a drive letter. While selecting the formatting options, she modifies the default allocation unit size. What will happen if the allocation unit size is large?

Accepted Answer

A)  The performance of file sharing applications will increase. 
B)  The performance of database applications will increase. 
C)  The performance of file sharing applications will decrease. 
D)  The performance of database applications will decrease. 
A)  The performance of file sharing applications will increase. 
B)  The performance of database applications will increase. 
C)  The performance of file sharing applications will decrease. 
D)  The performance of database applications will decrease.

Question 9

While copying files between folders, it is possible to retrace and complete the transfer in case of a power failure if an NTFS-based filesystem is being used. The same cannot be said for a FAT32 filesystem. What do you think could be the reason for this difference?

Accepted Answer

A)  NTFS is a filesystem, while FAT32 is not. 
B)  FAT32 keeps track of information being written, while NTFS does not. 
C)  FAT32 is only used as a removable device, while NTFS is not. 
D)  NTFS is a journaling filesystem, while FAT32 is not. 
A)  NTFS is a filesystem, while FAT32 is not. 
B)  FAT32 keeps track of information being written, while NTFS does not. 
C)  FAT32 is only used as a removable device, while NTFS is not. 
D)  NTFS is a journaling filesystem, while FAT32 is not.

Question 10

Rishab is looking for ways to manage duplicate file content on his organization's shared drive. He enables data deduplication for this purpose. To save computing resources, he wants to change the settings such that data deduplication occurs in the evening. What must Rishab do to make this change?

Accepted Answer

A)  Enter the file extensions to be excluded 
B)  Click the Add button under Deduplication Settings 
C)  Click Set Deduplication Schedule 
D)  Select the Apply button under Deduplication Settings 
A)  Enter the file extensions to be excluded 
B)  Click the Add button under Deduplication Settings 
C)  Click Set Deduplication Schedule 
D)  Select the Apply button under Deduplication Settings

Question 11

Pablo is a system administrator in training. He is trying to manually defragment the F: volume in Becky's system. Help Pablo identify the correct method to perform manual defragmentation.

Accepted Answer

A)  Right-click the volume, click Properties, highlight the Tools tab, and click the Optimize button. 
B)  Right-click the volume, click Properties, highlight the Tools tab, and click the Check button. 
C)  Write the "Repair-Volume-DriveLetter F -Scan" command in Windows PowerShell. 
D)  Write the "Optimize-Volume -DriveLetter" command in Windows PowerShell. 
A)  Right-click the volume, click Properties, highlight the Tools tab, and click the Optimize button. 
B)  Right-click the volume, click Properties, highlight the Tools tab, and click the Check button. 
C)  Write the "Repair-Volume-DriveLetter F -Scan" command in Windows PowerShell. 
D)  Write the "Optimize-Volume -DriveLetter" command in Windows PowerShell.

Question 12

Gabriela attempts to create a virtual disk on a storage pool using Server Manager. However, she is unable to select the Create storage tiers on this virtual disk option. Why do you think she is not able to use the option?

Accepted Answer

A)  She enters the wrong virtual disk name. 
B)  She is not using the New Virtual Disk Wizard. 
C)  The system uses an SSD and not an HDD. 
D)  The storage spool does not have sufficient space. 
A)  She enters the wrong virtual disk name. 
B)  She is not using the New Virtual Disk Wizard. 
C)  The system uses an SSD and not an HDD. 
D)  The storage spool does not have sufficient space.

Question 13

How will you configure an existing Windows Server 2019 system as an iSCSI SAN device?

Accepted Answer

To configure an existing Windows Server

Question 14

How much storage space is reserved on a storage device to convert a storage disk to a dynamic disk using a Windows tool?

Accepted Answer

A)  1 KB 
B)  10 KB 
C)  1 MB 
D)  10 MB 
A)  1 KB 
B)  10 KB 
C)  1 MB 
D)  10 MB

Question 15

How is a simple volume created in Server Manager?

Accepted Answer

The process used to create a simple volu

Question 16

As a server administrator, you are performing GPT partitioning for the storage device on a system with UEFI BIOS. What functions will this partitioning allow you to do if you create additional volumes on a single storage device?

Accepted Answer

Creating additional volumes on a single

Question 17

What are the different RAID levels, and how are they different from each other?

Accepted Answer

There are seven basic RAID levels. They

Question 18

Explain why optimizing volumes is necessary.

Accepted Answer

When you save a file to a filesystem on

Question 19

Imran is associating a drive letter to a filesystem so that the drive letter can be accessed by the operating system. What is the term given to the process that Imran is carrying out?

Accepted Answer

A)  Journaling 
B)  Formatting 
C)  Mounting 
D)  Spanning 
A)  Journaling 
B)  Formatting 
C)  Mounting 
D)  Spanning

Question 20

Which of the following is a requirement for using Storage Spaces Direct?

Accepted Answer

A)  A 10 GB Ethernet network interface with remote-direct memory access (RDM
A)  support is a must. 
B)  More than 20 servers must be available. 
C)  The number of SSDs used should not be more than one. 
D)  The servers should be from different Active Directory domains. 
A)  A 10 GB Ethernet network interface with remote-direct memory access (RDM
A)  support is a must. 
B)  More than 20 servers must be available. 
C)  The number of SSDs used should not be more than one. 
D)  The servers should be from different Active Directory domains.

Which of the following is a term given to the software component in the operating system that connects to the SAN device via iSCSI?

Which of the following RAID level configurations is not supported by Windows Server 2019?

The modern partition table is called the Master Boot Record (MBR) and uses storage devices that are larger than 2 TB.

You are asked to create seven partitions in a storage device that uses an MBR. The device already has two partitions. However, you are also told that you cannot create more than a certain number of partitions on the storage device using an MBR. What would your next step be?

How do you create a RAID level 1 volume with two disks in the Disk Management tool?

Sonia is configuring a RAID level 5 array with five disks. Each disk has the capacity to store 3 TB of data. What is the total storage size that Sonia can use to store data?

Which of the following statements is true of SAN devices?

Nadia uses the Disk Management tool to create a simple volume in one of the disks. She specifies the simple volume size and chooses a drive letter. While selecting the formatting options, she modifies the default allocation unit size. What will happen if the allocation unit size is large?

While copying files between folders, it is possible to retrace and complete the transfer in case of a power failure if an NTFS-based filesystem is being used. The same cannot be said for a FAT32 filesystem. What do you think could be the reason for this difference?

Rishab is looking for ways to manage duplicate file content on his organization's shared drive. He enables data deduplication for this purpose. To save computing resources, he wants to change the settings such that data deduplication occurs in the evening. What must Rishab do to make this change?

Pablo is a system administrator in training. He is trying to manually defragment the F: volume in Becky's system. Help Pablo identify the correct method to perform manual defragmentation.

Gabriela attempts to create a virtual disk on a storage pool using Server Manager. However, she is unable to select the Create storage tiers on this virtual disk option. Why do you think she is not able to use the option?

How will you configure an existing Windows Server 2019 system as an iSCSI SAN device?

How much storage space is reserved on a storage device to convert a storage disk to a dynamic disk using a Windows tool?

How is a simple volume created in Server Manager?

As a server administrator, you are performing GPT partitioning for the storage device on a system with UEFI BIOS. What functions will this partitioning allow you to do if you create additional volumes on a single storage device?

What are the different RAID levels, and how are they different from each other?

Explain why optimizing volumes is necessary.

Imran is associating a drive letter to a filesystem so that the drive letter can be accessed by the operating system. What is the term given to the process that Imran is carrying out?

Which of the following is a requirement for using Storage Spaces Direct?

Getting Started With Windows Server 2019

Configuring Windows Server 2019

Implementing Hyper-V and Automated Server Deployment

Introduction to Active Directory and Account Management

Configuring Resource Access

Configuring Printing Services

Implementing Network Services

Configuring Remote Access Services

Configuring Cloud Features

Securing Windows Server 2019

Monitoring and Troubleshooting Windows Server 2019

Filters

Exam 7: Configuring and Managing Data Storage

Which of the following is a term given to the software component in the operating system that connects to the SAN device via iSCSI?

Which of the following RAID level configurations is not supported by Windows Server 2019?

The modern partition table is called the Master Boot Record (MBR) and uses storage devices that are larger than 2 TB.

You are asked to create seven partitions in a storage device that uses an MBR. The device already has two partitions. However, you are also told that you cannot create more than a certain number of partitions on the storage device using an MBR. What would your next step be?

How do you create a RAID level 1 volume with two disks in the Disk Management tool?

Sonia is configuring a RAID level 5 array with five disks. Each disk has the capacity to store 3 TB of data. What is the total storage size that Sonia can use to store data?

Which of the following statements is true of SAN devices?

Nadia uses the Disk Management tool to create a simple volume in one of the disks. She specifies the simple volume size and chooses a drive letter. While selecting the formatting options, she modifies the default allocation unit size. What will happen if the allocation unit size is large?

While copying files between folders, it is possible to retrace and complete the transfer in case of a power failure if an NTFS-based filesystem is being used. The same cannot be said for a FAT32 filesystem. What do you think could be the reason for this difference?

Rishab is looking for ways to manage duplicate file content on his organization's shared drive. He enables data deduplication for this purpose. To save computing resources, he wants to change the settings such that data deduplication occurs in the evening. What must Rishab do to make this change?

Pablo is a system administrator in training. He is trying to manually defragment the F: volume in Becky's system. Help Pablo identify the correct method to perform manual defragmentation.

Gabriela attempts to create a virtual disk on a storage pool using Server Manager. However, she is unable to select the Create storage tiers on this virtual disk option. Why do you think she is not able to use the option?

How will you configure an existing Windows Server 2019 system as an iSCSI SAN device?

How much storage space is reserved on a storage device to convert a storage disk to a dynamic disk using a Windows tool?

How is a simple volume created in Server Manager?

As a server administrator, you are performing GPT partitioning for the storage device on a system with UEFI BIOS. What functions will this partitioning allow you to do if you create additional volumes on a single storage device?

What are the different RAID levels, and how are they different from each other?

Explain why optimizing volumes is necessary.

Imran is associating a drive letter to a filesystem so that the drive letter can be accessed by the operating system. What is the term given to the process that Imran is carrying out?

Which of the following is a requirement for using Storage Spaces Direct?

Getting Started With Windows Server 2019

Configuring Windows Server 2019

Implementing Hyper-V and Automated Server Deployment

Introduction to Active Directory and Account Management

Configuring Resource Access

Configuring Printing Services

Implementing Network Services

Configuring Remote Access Services

Configuring Cloud Features

Securing Windows Server 2019

Monitoring and Troubleshooting Windows Server 2019

Filters