Question 1

What term refers to the theoretical exact size?

Accepted Answer

A)  material size 
B)  transitional size 
C)  basic size 
D)  diametric size 
A)  material size 
B)  transitional size 
C)  basic size 
D)  diametric size

Question 2

Angle tolerances should always be rounded to the nearest whole degree.

Accepted Answer

A) True 
 B)False

Question 3

What term refers to the permissible amount a dimension may vary in size during manufacturing or construction?

Accepted Answer

A)  datum 
B)  tolerance 
C)  basic size 
D)  interference 
A)  datum 
B)  tolerance 
C)  basic size 
D)  interference

Question 4

Imagine that you need to indicate a tolerance limit of .125 for dimensions of 3.275 and 3.500. What is the correct way to indicate these dimensions using horizontal alignment?

Accepted Answer

A)  3.275 - 3.500 
B)  3.500 - 3.275 
C)  3.275/3.500 
D)  3.500/3.275 
A)  3.275 - 3.500 
B)  3.500 - 3.275 
C)  3.275/3.500 
D)  3.500/3.275

Question 5

The exact location of product features such as holes and projections is controlled by _____ tolerancing.

Accepted Answer

A)  positional 
B)  form 
C)  datum 
D)  plus 
A)  positional 
B)  form 
C)  datum 
D)  plus

Question 6

The term _____ refers to the condition of a plane.

Accepted Answer

A)  flatness 
B)  straightness 
C)  circularity 
D)  angularity 
A)  flatness 
B)  straightness 
C)  circularity 
D)  angularity

Question 7

Interference fits have negative clearances.

Accepted Answer

A) True 
 B)False

Question 8

Circular runout controls a circular element at _____ position(s) on a surface.

Accepted Answer

A)  one 
B)  two 
C)  five 
D)  two or more 
A)  one 
B)  two 
C)  five 
D)  two or more

Question 9

If you see a notation that includes an "S" within a circle, what does it refer to?

Accepted Answer

A)  straightness 
B)  regardless of feature size 
C)  form tolerancing 
D)  positional tolerancing 
A)  straightness 
B)  regardless of feature size 
C)  form tolerancing 
D)  positional tolerancing

Question 10

What is used to locate specific surfaces for reference on a technical drawing?

Accepted Answer

A)  tolerance chart 
B)  direct dimension 
C)  feature control frame 
D)  datum target 
A)  tolerance chart 
B)  direct dimension 
C)  feature control frame 
D)  datum target

What term refers to the theoretical exact size?

Angle tolerances should always be rounded to the nearest whole degree.

What term refers to the permissible amount a dimension may vary in size during manufacturing or construction?

Imagine that you need to indicate a tolerance limit of .125 for dimensions of 3.275 and 3.500. What is the correct way to indicate these dimensions using horizontal alignment?

The exact location of product features such as holes and projections is controlled by _____ tolerancing.

The term _____ refers to the condition of a plane.

Interference fits have negative clearances.

Circular runout controls a circular element at _____ position(s) on a surface.

If you see a notation that includes an "S" within a circle, what does it refer to?

What is used to locate specific surfaces for reference on a technical drawing?

Introduction to Contemporary Drafting

Drafting Equipment and Supplies

Sketching and Lettering

Introduction to Computer-Aided Drafting Systems

Drafting Room Design Teams

Drafting Conventions and Formats

Geometric Construction

Multiview Drawings

Dimensioning Conventions and Surface Finishes

Sectional Views

Auxiliary Views and Revolutions

Descriptive Geometry

Development Drawings

Pictorial Drawings

Fasteners

Green Design in Industry

Working Drawings

Welding Drawings

Gears and Cams

Piping Drawings

Electronics Drafting

Tool Design Drafting

Architectural Drafting

Filters

Exam 10: Tolerancing and Geometric Tolerancing

What term refers to the theoretical exact size?

Angle tolerances should always be rounded to the nearest whole degree.

What term refers to the permissible amount a dimension may vary in size during manufacturing or construction?

Imagine that you need to indicate a tolerance limit of .125 for dimensions of 3.275 and 3.500. What is the correct way to indicate these dimensions using horizontal alignment?

The exact location of product features such as holes and projections is controlled by _____ tolerancing.

The term _____ refers to the condition of a plane.

Interference fits have negative clearances.

Circular runout controls a circular element at _____ position(s) on a surface.

If you see a notation that includes an "S" within a circle, what does it refer to?

What is used to locate specific surfaces for reference on a technical drawing?

Introduction to Contemporary Drafting

Drafting Equipment and Supplies

Sketching and Lettering

Introduction to Computer-Aided Drafting Systems

Drafting Room Design Teams

Drafting Conventions and Formats

Geometric Construction

Multiview Drawings

Dimensioning Conventions and Surface Finishes

Sectional Views

Auxiliary Views and Revolutions

Descriptive Geometry

Development Drawings

Pictorial Drawings

Fasteners

Green Design in Industry

Working Drawings

Welding Drawings

Gears and Cams

Piping Drawings

Electronics Drafting

Tool Design Drafting

Architectural Drafting

Filters