Question 1

2D DESIGN
-The Hatch ribbon can be called to screen

Accepted Answer

A)  By clicking the Hatch tool icon in the Home/Draw panel 
B)  By entering the abbreviation h at the command line 
C)  By entering hatch at the command line 
D)  By any one of the choices as given in a, b or c 
A)  By clicking the Hatch tool icon in the Home/Draw panel 
B)  By entering the abbreviation h at the command line 
C)  By entering hatch at the command line 
D)  By any one of the choices as given in a, b or c

Question 2

2D DESIGN
-An AutoCAD sheet set is

Accepted Answer

A)  A number of drawings which have been printed from AutoCAD drawings and saved in an envelope 
B)  A series of printed AutoCAD drawings 
C)  A number of AutoCAD drawings saved in Paper Space format and held in a file 
D)  Any drawings relating to a specific architectural, building or engineering process 
A)  A number of drawings which have been printed from AutoCAD drawings and saved in an envelope 
B)  A series of printed AutoCAD drawings 
C)  A number of AutoCAD drawings saved in Paper Space format and held in a file 
D)  Any drawings relating to a specific architectural, building or engineering process

Question 3

3D DESIGN
-Is it possible to mirror a 3D solid model drawing using the Mirror tool from the Modify toolbar?

Accepted Answer

A)  No 
B)  Yes 
C)  Only if the 3D solid model drawing is placed in the World UCS 
A)  No 
B)  Yes 
C)  Only if the 3D solid model drawing is placed in the World UCS

Question 4

2D DESIGN
-The key F9 toggles on/off

Accepted Answer

A)  Snap 
B)  Ortho 
C)  Grid 
D)  DYN 
A)  Snap 
B)  Ortho 
C)  Grid 
D)  DYN

Question 5

3D DESIGN
-Which of the following tools can be used when constructing 3D solid model drawings - Move, Copy, Chamfer, Fillet, Mirror, Rotate, Scale

Accepted Answer

A)  None of them 
B)  Only the Chamfer and Fillet tools 
C)  Any of them 
D)  Only Move and Copy 
A)  None of them 
B)  Only the Chamfer and Fillet tools 
C)  Any of them 
D)  Only Move and Copy

Question 6

2D DESIGN
-External references (xrefs) can be described as

Accepted Answer

A)  They are the same as blocks and are saved within the drawing file in which they were constructed, but can be inserted into other drawings 
B)  They are different to blocks in that changes in an original external reference are reflected in the drawing in which the xref is inserted 
C)  They are blocks which are saved to file names in their own right 
D)  They are files which refer to parts within a drawing 
A)  They are the same as blocks and are saved within the drawing file in which they were constructed, but can be inserted into other drawings 
B)  They are different to blocks in that changes in an original external reference are reflected in the drawing in which the xref is inserted 
C)  They are blocks which are saved to file names in their own right 
D)  They are files which refer to parts within a drawing

Question 7

3D DESIGN
-Is it possible to use the Extrude faces tool from the Home/Solids Editing panel on a region constructed from a closed polyline?

Accepted Answer

A)  Yes, any region can have its face extruded using this tool 
B)  Yes, if the region has not been obtained by using any of the Boolean operators 
C)  No - a region of any type cannot be acted upon by this tool 
D)  Yes, providing the line of extrusion is a straight line or polyline 
A)  Yes, any region can have its face extruded using this tool 
B)  Yes, if the region has not been obtained by using any of the Boolean operators 
C)  No - a region of any type cannot be acted upon by this tool 
D)  Yes, providing the line of extrusion is a straight line or polyline

Question 8

2D DESIGN
-When saving an AutoCAD 2013 drawing it is filed with the extension

Accepted Answer

A)  .drwg 
B)  .dwg 
C)  .dwt 
D) .dg 
A)  .drwg 
B)  .dwg 
C)  .dwt 
D) .dg

Question 9

3D DESIGN
-The term UCS WORLD applies to

Accepted Answer

A)  The plane on which the operator is working at the time 
B)  The standard XY plane which appears when AutoCAD is loaded on screen 
C)  Any one of the orthogonal planes 
D)  Any plane set when working in the UCS 
A)  The plane on which the operator is working at the time 
B)  The standard XY plane which appears when AutoCAD is loaded on screen 
C)  Any one of the orthogonal planes 
D)  Any plane set when working in the UCS

Question 10

3D DESIGN
-Can Ambient lighting be set at a figure before rendering a 3D model

Accepted Answer

A)  Yes 
B)  No 
C)  Requires a setting in a dialog 
D)  Set to a figure of 0.3 
A)  Yes 
B)  No 
C)  Requires a setting in a dialog 
D)  Set to a figure of 0.3

Question 11

2D DESIGN
-The command line abbreviation for the Circle tool is

Accepted Answer

A)  cir 
B)  c 
C)  ci 
D)  cl 
A)  cir 
B)  c 
C)  ci 
D)  cl

Question 12

3D DESIGN
-When constructing 3D model drawings in multiple viewports

Accepted Answer

A)  Each viewport must be set independently to different viewpoints from the Visual Styles menu 
B)  Only when working in a particular viewport will its viewpoint need to be set 
C)  Each viewport is set to different viewpoints when a multiple viewport is chosen from the Viewports dialog 
D)  Each viewport is set to different viewpoints when a multiple viewport is chosen from the Viewports dialog only if the Setup popup list is set to 3D 
A)  Each viewport must be set independently to different viewpoints from the Visual Styles menu 
B)  Only when working in a particular viewport will its viewpoint need to be set 
C)  Each viewport is set to different viewpoints when a multiple viewport is chosen from the Viewports dialog 
D)  Each viewport is set to different viewpoints when a multiple viewport is chosen from the Viewports dialog only if the Setup popup list is set to 3D

Question 13

3D DESIGN
-When using the Revolve tool which of the following can be revolved

Accepted Answer

A)  Regions 
B)  An outline constructed using the Line tool 
C)  Circles 
D)  Closed plines
(
E)  Ellipses 
A)  Regions 
B)  An outline constructed using the Line tool 
C)  Circles 
D)  Closed plines
(
E)  Ellipses

Question 14

3D DESIGN
-When setting lighting before rendering a 3D model Distant light can be described as

Accepted Answer

A)  A light the value of which diminishes in intensity the further the light position is set from the 3D model 
B)  Its light value is of the same intensity no matter how far the light position is set from the 3D model 
C)  Its intensity increases when set in front and above the 3D model compared with its being set to the side and above the model 
D)  A light which sheds rays in all directions from its set position 
A)  A light the value of which diminishes in intensity the further the light position is set from the 3D model 
B)  Its light value is of the same intensity no matter how far the light position is set from the 3D model 
C)  Its intensity increases when set in front and above the 3D model compared with its being set to the side and above the model 
D)  A light which sheds rays in all directions from its set position

Question 15

3D DESIGN
-The Slice tool is used for slicing a 3D solid model into

Accepted Answer

A)  Two parts 
B)  Two parts ready for the calling of the Section tool 
C)  Into as many parts as are required 
D)  To remove a part not wanted in a 3D solid model drawing 
A)  Two parts 
B)  Two parts ready for the calling of the Section tool 
C)  Into as many parts as are required 
D)  To remove a part not wanted in a 3D solid model drawing

Question 16

3D DESIGN
-When using the Extrude tool the set variable ISOLINES must be set to

Accepted Answer

A)  4 
B)  16 
C)  Any number 
D)  Any number below 2047 
A)  4 
B)  16 
C)  Any number 
D)  Any number below 2047

Question 17

3D DESIGN
-When a selected face of a 3D solid model drawing is selected by the Move Faces tool from the Home/Solids Editing panel, the face is

Accepted Answer

A)  Moved away from the 3D solid as a separate entity 
B)  Moved in such a manner that the body of the 3D solid to which the face is attached is extruded 
C)  Moved to be placed on another 3D model 
D)  The whole of the 3D model is moved 
A)  Moved away from the 3D solid as a separate entity 
B)  Moved in such a manner that the body of the 3D solid to which the face is attached is extruded 
C)  Moved to be placed on another 3D model 
D)  The whole of the 3D model is moved

Question 18

2D DESIGN
-Press the F9 key of the keyboard for

Accepted Answer

A)  Grid on/off 
B)  Snap on/off 
C)  Ortho on/off 
D)  Osnap on/off 
A)  Grid on/off 
B)  Snap on/off 
C)  Ortho on/off 
D)  Osnap on/off

Question 19

3D DESIGN
-When a photograph has been inserted in an AutoCAD drawing on screen and the drawing is printed or plotted, the photograph does not print or plot with the drawing

Accepted Answer

A)  This is correct 
B)  This is not true. The photograph will print or plot along with the drawing 
C)  This is true only if the photograph was inserted in a drawing in paper Space 
D)  This is true only if the photograph was inserted in a drawing in Model Space 
A)  This is correct 
B)  This is not true. The photograph will print or plot along with the drawing 
C)  This is true only if the photograph was inserted in a drawing in paper Space 
D)  This is true only if the photograph was inserted in a drawing in Model Space

Question 20

3D DESIGN
-The term UCS stands for

Accepted Answer

A)  User Coordinate State 
B)  Using Coordinates Screen 
C)  User Coordinate System 
D)  User Coordinate Set 
A)  User Coordinate State 
B)  Using Coordinates Screen 
C)  User Coordinate System 
D)  User Coordinate Set

Exam 1: Autocad 2013 2D and 3D Design

2D DESIGN -The Hatch ribbon can be called to screen

2D DESIGN -An AutoCAD sheet set is

3D DESIGN -Is it possible to mirror a 3D solid model drawing using the Mirror tool from the Modify toolbar?

2D DESIGN -The key F9 toggles on/off

3D DESIGN -Which of the following tools can be used when constructing 3D solid model drawings - Move, Copy, Chamfer, Fillet, Mirror, Rotate, Scale

2D DESIGN -External references (xrefs) can be described as

3D DESIGN -Is it possible to use the Extrude faces tool from the Home/Solids Editing panel on a region constructed from a closed polyline?

2D DESIGN -When saving an AutoCAD 2013 drawing it is filed with the extension

3D DESIGN -The term UCS WORLD applies to

3D DESIGN -Can Ambient lighting be set at a figure before rendering a 3D model

2D DESIGN -The command line abbreviation for the Circle tool is

3D DESIGN -When constructing 3D model drawings in multiple viewports

3D DESIGN -When using the Revolve tool which of the following can be revolved

3D DESIGN -When setting lighting before rendering a 3D model Distant light can be described as

3D DESIGN -The Slice tool is used for slicing a 3D solid model into

3D DESIGN -When using the Extrude tool the set variable ISOLINES must be set to

3D DESIGN -When a selected face of a 3D solid model drawing is selected by the Move Faces tool from the Home/Solids Editing panel, the face is

2D DESIGN -Press the F9 key of the keyboard for

3D DESIGN -When a photograph has been inserted in an AutoCAD drawing on screen and the drawing is printed or plotted, the photograph does not print or plot with the drawing

3D DESIGN -The term UCS stands for

Filters