Question 1

From the following which is not the type of protocol used in CIM?

Accepted Answer

A) Open standard interconnection - OSI 
B) Manufacturing Automation Protocol - MAP 
C) Technical and Industrial Protocol - TIP 
D) None of the above 
A) Open standard interconnection - OSI 
B) Manufacturing Automation Protocol - MAP 
C) Technical and Industrial Protocol - TIP 
D) None of the above

Question 2

From the following which is the benefits of AGV.

Accepted Answer

A) Reduction in man-hours 
B) Useful in hazardous area 
C) Both A & B 
D) None of the above 
A) Reduction in man-hours 
B) Useful in hazardous area 
C) Both A & B 
D) None of the above

Question 3

In ship manufacturing, the type of layout preferred is

Accepted Answer

A) Product layout 
B) Process layout 
C) Fixed-position layout 
D) GT layout 
A) Product layout 
B) Process layout 
C) Fixed-position layout 
D) GT layout

Question 4

From the following which type of work envelope is made in Cartesian coordinate robot.

Accepted Answer

A) Square work envelope 
B) Spherical work envelope 
C) Cylindrical work envelope 
D) Rectangular work envelope 
A) Square work envelope 
B) Spherical work envelope 
C) Cylindrical work envelope 
D) Rectangular work envelope

Question 5

Which type of motion is possible in cylindrical coordinate robots?

Accepted Answer

A) 3 rotational motion 
B) 3 linear and 1 rotational motion 
C) 2 linear and 1 rotational motion 
D) 3 linear motion 
A) 3 rotational motion 
B) 3 linear and 1 rotational motion 
C) 2 linear and 1 rotational motion 
D) 3 linear motion

Question 6

Which layout is mostly used for the batch type of production?

Accepted Answer

A) Product layout 
B) Process layout 
C) In line layout 
D) None of the above 
A) Product layout 
B) Process layout 
C) In line layout 
D) None of the above

Question 7

From the following in which coding method supplementary code and form code are used?

Accepted Answer

A) KK3 system 
B) The MICLASS system 
C) OPITZ coding system 
D) The DICLASS system 
A) KK3 system 
B) The MICLASS system 
C) OPITZ coding system 
D) The DICLASS system

Question 8

In a simple and visual method of Cell design, the priorities in classifying may be in the order

Accepted Answer

A) Rotational or non rotational - Material - Size - Shape 
B) Material - Rotational or non rotational - Size - Shape 
C) Size - Rotational or non rotational - Material - Shape 
D) Shape - Rotational or non rotational - Material - Size 
A) Rotational or non rotational - Material - Size - Shape 
B) Material - Rotational or non rotational - Size - Shape 
C) Size - Rotational or non rotational - Material - Shape 
D) Shape - Rotational or non rotational - Material - Size

Question 9

Chain type coding structure is also known as________

Accepted Answer

A) Poly code 
B) Mono code 
C) Hybrid code 
D) Miscellaneous code 
A) Poly code 
B) Mono code 
C) Hybrid code 
D) Miscellaneous code

Question 10

Which of the following is not the method of part family formation

Accepted Answer

A) Visual inspection method 
B) Automatic product sorting 
C) Parts classification & coding 
D) Production flow analysis 
A) Visual inspection method 
B) Automatic product sorting 
C) Parts classification & coding 
D) Production flow analysis

Question 11

The middle four digits of the Opitz classification system are ______

Accepted Answer

A) Form code 
B) Secondary code 
C) Supplementary code 
D) Stationary code 
A) Form code 
B) Secondary code 
C) Supplementary code 
D) Stationary code

Question 12

Supplementary code of the Opitz system is for_________

Accepted Answer

A) Design attributes 
B) Manufacturing attributes 
C) Production operation type & sequence 
D) Maintenance flow 
A) Design attributes 
B) Manufacturing attributes 
C) Production operation type & sequence 
D) Maintenance flow

Question 13

____ grippers are used to transfer ferrous material

Accepted Answer

A) Magnetic grippers 
B) Mechanical grippers 
C) Adhesive grippers 
D) Vacuum cup grippers 
A) Magnetic grippers 
B) Mechanical grippers 
C) Adhesive grippers 
D) Vacuum cup grippers

Question 14

____ is the bridge between design and manufacturing

Accepted Answer

A) Production planning 
B) Process Planning 
C) Product design 
D) None of the above 
A) Production planning 
B) Process Planning 
C) Product design 
D) None of the above

Question 15

From the following which type of work envelope is made in jointed arm robot

Accepted Answer

A) Rectangular work envelope 
B) Cylindrical work envelope 
C) Spherical or hemispherical work envelope 
A) Rectangular work envelope 
B) Cylindrical work envelope 
C) Spherical or hemispherical work envelope

Question 16

From the following which is type of coding system?

Accepted Answer

A) OPITZ coding system 
B) KK3 system 
C) The MICLASS system 
D) All of the above 
A) OPITZ coding system 
B) KK3 system 
C) The MICLASS system 
D) All of the above

Question 17

The speed at which robot is capable of manipulating its end effector is known as the____.

Accepted Answer

A) Velocity of robot 
B) Maximum reach 
C) Speed of movement 
D) Load carrying capacity 
A) Velocity of robot 
B) Maximum reach 
C) Speed of movement 
D) Load carrying capacity

Question 18

Digit 3 in Opitz system is for_________

Accepted Answer

A) Part class 
B) Main shape 
C) Rotational machining 
D) Plane surface machining 
A) Part class 
B) Main shape 
C) Rotational machining 
D) Plane surface machining

Question 19

Which one of the following statements is TRUE?

Accepted Answer

A) Teach pendant is used for lead-through teaching. 
B) Teach pendant is used for manual teaching. 
C) Teach pendant is used for off-line teaching of robots. 
D) Teach pendant is not used in robot teaching. 
A) Teach pendant is used for lead-through teaching. 
B) Teach pendant is used for manual teaching. 
C) Teach pendant is used for off-line teaching of robots. 
D) Teach pendant is not used in robot teaching.

Question 20

Which manufacturing system is best suited for batch production

Accepted Answer

A) Flexible 
B) Programmable 
C) Fixed 
D) All of above 
A) Flexible 
B) Programmable 
C) Fixed 
D) All of above

From the following which is not the type of protocol used in CIM?

From the following which is the benefits of AGV.

In ship manufacturing, the type of layout preferred is

From the following which type of work envelope is made in Cartesian coordinate robot.

Which type of motion is possible in cylindrical coordinate robots?

Which layout is mostly used for the batch type of production?

From the following in which coding method supplementary code and form code are used?

In a simple and visual method of Cell design, the priorities in classifying may be in the order

Chain type coding structure is also known as________

Which of the following is not the method of part family formation

The middle four digits of the Opitz classification system are ______

Supplementary code of the Opitz system is for_________

____ grippers are used to transfer ferrous material

____ is the bridge between design and manufacturing

From the following which type of work envelope is made in jointed arm robot

From the following which is type of coding system?

The speed at which robot is capable of manipulating its end effector is known as the____.

Digit 3 in Opitz system is for_________

Which one of the following statements is TRUE?

Which manufacturing system is best suited for batch production

Computer Graphics

Geometric Modeling

Finite Element Analysis (FEA)

Computer-Aided Design (CAD)

Advanced Manufacturing Method

Filters

Exam 6: Robotics and Automation

From the following which is not the type of protocol used in CIM?

From the following which is the benefits of AGV.

In ship manufacturing, the type of layout preferred is

From the following which type of work envelope is made in Cartesian coordinate robot.

Which type of motion is possible in cylindrical coordinate robots?

Which layout is mostly used for the batch type of production?

From the following in which coding method supplementary code and form code are used?

In a simple and visual method of Cell design, the priorities in classifying may be in the order

Chain type coding structure is also known as________

Which of the following is not the method of part family formation

The middle four digits of the Opitz classification system are ______

Supplementary code of the Opitz system is for_________

____ grippers are used to transfer ferrous material

____ is the bridge between design and manufacturing

From the following which type of work envelope is made in jointed arm robot

From the following which is type of coding system?

The speed at which robot is capable of manipulating its end effector is known as the____.

Digit 3 in Opitz system is for_________

Which one of the following statements is TRUE?

Which manufacturing system is best suited for batch production

Computer Graphics

Geometric Modeling

Finite Element Analysis (FEA)

Computer-Aided Design (CAD)

Advanced Manufacturing Method

Filters