Question 1

The main function of a balanced modulator is to

Accepted Answer

A) produce balanced modulation of a carrier wave 
B) produce 100% modulation 
C) suppress carrier signal in order to create a single-sideband or double sideband 
D) limit noise picked by a receiver 
A) produce balanced modulation of a carrier wave 
B) produce 100% modulation 
C) suppress carrier signal in order to create a single-sideband or double sideband 
D) limit noise picked by a receiver B

Question 2

In TV systems, equalising pulses are sent during

Accepted Answer

A) horizontal blanking 
B) vertical blanking 
C) serrations 
D) horizontal retrace 
A) horizontal blanking 
B) vertical blanking 
C) serrations 
D) horizontal retrace A

Question 3

A three stage telephone switching structure is to have 128 input and 128 output terminals. There are 16 first stage and 16 third stage matrices. To avoid blocking the number of intermediate paths required is

Accepted Answer

A) 16 
B) 15 
C) 8 
D) 1 
A) 16 
B) 15 
C) 8 
D) 1 B

Question 4

For a plate-modulated class C amplifier the plate supply voltage is E. The maximum plate cathode voltage could be almost high as

Accepted Answer

A) 2e 
B) 3e 
C) 4e 
D) 6e 
A) 2e 
B) 3e 
C) 4e 
D) 6e

Question 5

In a TV receiver antenna the length of reflector rod.

Accepted Answer

A) is the same as that of dipole 
B) is less than that of dipole 
C) is more than that of dipole 
D) may be equal, more or less than that of dipole 
A) is the same as that of dipole 
B) is less than that of dipole 
C) is more than that of dipole 
D) may be equal, more or less than that of dipole

Question 6

The modulation index of an FM is changed from 0 to 1. How does the transmitted power change?

Accepted Answer

A) gets halved 
B) gets doubled 
C) gets increased by 50 percent 
D) remains unchanged 
A) gets halved 
B) gets doubled 
C) gets increased by 50 percent 
D) remains unchanged

Question 7

For AM receivers the standard IF frequency is

Accepted Answer

A) 106 khz 
B) 455 khz 
C) 1.07 mhz 
D) 10.7 mhz 
A) 106 khz 
B) 455 khz 
C) 1.07 mhz 
D) 10.7 mhz

The main function of a balanced modulator is to

In TV systems, equalising pulses are sent during

A three stage telephone switching structure is to have 128 input and 128 output terminals. There are 16 first stage and 16 third stage matrices. To avoid blocking the number of intermediate paths required is

For a plate-modulated class C amplifier the plate supply voltage is E. The maximum plate cathode voltage could be almost high as

In a TV receiver antenna the length of reflector rod.

The modulation index of an FM is changed from 0 to 1. How does the transmitted power change?

For AM receivers the standard IF frequency is

Communication and Language

Communication and Radio Broadcasting

Radio Transmission and Modulation Techniques

Filters

Exam 4: Electronics and Telecommunications

The main function of a balanced modulator is to

In TV systems, equalising pulses are sent during

A three stage telephone switching structure is to have 128 input and 128 output terminals. There are 16 first stage and 16 third stage matrices. To avoid blocking the number of intermediate paths required is

For a plate-modulated class C amplifier the plate supply voltage is E. The maximum plate cathode voltage could be almost high as

In a TV receiver antenna the length of reflector rod.

The modulation index of an FM is changed from 0 to 1. How does the transmitted power change?

For AM receivers the standard IF frequency is

Communication and Language

Communication and Radio Broadcasting

Radio Transmission and Modulation Techniques

Filters