Question 1

At the equator, the amount of dip is

Accepted Answer

A) 0° 
B) 45° 
C) 60° 
D) 90° 
A) 0° 
B) 45° 
C) 60° 
D) 90°

Question 2

In a duadrantal system, the bearing of a line is measured

Accepted Answer

A) always clockwise from the south point of the reference meridian towards the line right round the circle 
B) clockwise or anticlockwise from the east or west whichever is nearer the line towards north or south 
C) clockwise or anticlockwise from the north or wouth whichever is nearer the line towards east or west 
D) none of the above 
A) always clockwise from the south point of the reference meridian towards the line right round the circle 
B) clockwise or anticlockwise from the east or west whichever is nearer the line towards north or south 
C) clockwise or anticlockwise from the north or wouth whichever is nearer the line towards east or west 
D) none of the above

Question 3

A simple circular cruve is designated by the

Accepted Answer

A) radius of the curve 
B) cruvature of the curve 
C) angle subtended at the centre by a chord of any length 
D) angle subtended at the centre by a chord of particular length 
A) radius of the curve 
B) cruvature of the curve 
C) angle subtended at the centre by a chord of any length 
D) angle subtended at the centre by a chord of particular length

Question 4

Rise and fall method is used in.

Accepted Answer

A) profile levelling 
B) differential levelling 
C) check levelling 
D) none of these 
A) profile levelling 
B) differential levelling 
C) check levelling 
D) none of these

At the equator, the amount of dip is

In a duadrantal system, the bearing of a line is measured

A simple circular cruve is designated by the

Rise and fall method is used in.

Surveying and Compass

Surveying and Levelling: Part A

Surveying and Levelling: Part B

Surveying and Levelling: Part C

Surveying and Mapping Techniques: Part A

Surveying and Mapping Techniques: Part B

Surveying and Contouring Techniques

Surveying and Linear Measurements

Surveying Instruments and Methods

Surveying and Gps Terminology and Techniques

Surveying and Measurement Techniques: Part A

Surveying and Measurement Techniques: Part B

Surveying Terminology and Techniques: Part A

Surveying Terminology and Techniques: Part B

Surveying Terminology: Contour Intervals, Tacheometry, Magnetic Variation

Surveying Terminology: Bearings, Levelling, and Measurements

Surveying Terminology and Methods

Surveying Concepts and Techniques

Surveying Techniques and Instruments

Filters

Exam 15: Surveying Terminology and Techniques: Part C

At the equator, the amount of dip is

In a duadrantal system, the bearing of a line is measured

A simple circular cruve is designated by the

Rise and fall method is used in.

Surveying and Compass

Surveying and Levelling: Part A

Surveying and Levelling: Part B

Surveying and Levelling: Part C

Surveying and Mapping Techniques: Part A

Surveying and Mapping Techniques: Part B

Surveying and Contouring Techniques

Surveying and Linear Measurements

Surveying Instruments and Methods

Surveying and Gps Terminology and Techniques

Surveying and Measurement Techniques: Part A

Surveying and Measurement Techniques: Part B

Surveying Terminology and Techniques: Part A

Surveying Terminology and Techniques: Part B

Surveying Terminology: Contour Intervals, Tacheometry, Magnetic Variation

Surveying Terminology: Bearings, Levelling, and Measurements

Surveying Terminology and Methods

Surveying Concepts and Techniques

Surveying Techniques and Instruments

Filters