Question 1

For any part of the beam, between two concentrated load Shear force diagram is a

Accepted Answer

A) Horizontal straight line 
B) Vertical straight line 
C) Line inclined to x-axis 
D) Parabola 
A) Horizontal straight line 
B) Vertical straight line 
C) Line inclined to x-axis 
D) Parabola A

Question 2

In a composite beam bending, strain at the common interface will be

Accepted Answer

A) Equal 
B) Unequal 
C) Zero 
D) None 
A) Equal 
B) Unequal 
C) Zero 
D) None A

Question 3

Net force acting on the cross section of beam in bending is

Accepted Answer

A) Tensile 
B) Compressive 
C) Zero 
D) None 
A) Tensile 
B) Compressive 
C) Zero 
D) None C

Question 4

What is the other name for a positive bending moment?

Accepted Answer

A) Hogging 
B) Sagging 
C) Inflation 
D) Contra flexure 
A) Hogging 
B) Sagging 
C) Inflation 
D) Contra flexure

Question 5

Which is more stronger in bending equal area square or circular beam

Accepted Answer

A) Square beam 
B) Circular beam 
C) Both are equally strong 
D) None 
A) Square beam 
B) Circular beam 
C) Both are equally strong 
D) None

Question 6

What is the maximum bending moment acting on simply supported beam shown below?

Accepted Answer

A) 2000 Nm 
B) 3000 Nm 
C) 4000 Nm 
D) 6000 Nm 
A) 2000 Nm 
B) 3000 Nm 
C) 4000 Nm 
D) 6000 Nm

Question 7

At a point in a simply supported or overhanging beam where Shear force changes sign and Bending moment is

Accepted Answer

A) Maximum 
B) Zero 
C) Either increasing or decreasing 
D) Infinity 
A) Maximum 
B) Zero 
C) Either increasing or decreasing 
D) Infinity

Question 8

Net force acting on the cross section of beam in bending is

Accepted Answer

A) Tensile 
B) Compressive 
C) Shear 
D) None 
A) Tensile 
B) Compressive 
C) Shear 
D) None

Question 9

What is the maximum shear force acting on the beam shown below.

Accepted Answer

A) 125 N 
B) 200 N 
C) 4000 N 
D) 8000 N 
A) 125 N 
B) 200 N 
C) 4000 N 
D) 8000 N

Question 10

A 10 m long cantilever beam is fixed at point B. What is the bending moment at point B, if 5 m span of AC carries uniform distributed load of 10 kN/m

Accepted Answer

A) 125 kN/m 
B) 200 kN/m 
C) 375 kN/m 
D) 500 kN/m 
A) 125 kN/m 
B) 200 kN/m 
C) 375 kN/m 
D) 500 kN/m

Question 11

The diagram shown below, depicts bending diagram for

Accepted Answer

A) cantilever beam with uniformly distributed load 
B) cantilever beam with uniformly distributed load only on half side of the beam 
C) simply supported beam with varying distributed load 
D) simply supported beam with uniformly distributed load 
A) cantilever beam with uniformly distributed load 
B) cantilever beam with uniformly distributed load only on half side of the beam 
C) simply supported beam with varying distributed load 
D) simply supported beam with uniformly distributed load

Question 12

Brittle material beams need reinforcement on the

Accepted Answer

A) Tension side 
B) Compression side 
C) Shear side 
D) None 
A) Tension side 
B) Compression side 
C) Shear side 
D) None

Question 13

What is the product of sectional modulus and allowable bending stress called as?

Accepted Answer

A) Moment of inertia 
B) Moment of rigidity 
C) Moment of resistance 
D) Radius of gyration 
A) Moment of inertia 
B) Moment of rigidity 
C) Moment of resistance 
D) Radius of gyration

Question 14

For any part of a beam subjected to uniformly distributed load, bending moment diagram is

Accepted Answer

A) Horizontal straight line 
B) Vertical straight line 
C) Line inclined to x-axis 
D) Parabola 
A) Horizontal straight line 
B) Vertical straight line 
C) Line inclined to x-axis 
D) Parabola

Question 15

A sudden jump anywhere on the Bending moment diagram of a beam is caused by

Accepted Answer

A) Couple acting at that point 
B) Couple acting at some other point 
C) Concentrated load at the point 
D) Uniformly distributed load or Uniformly varying load on the beam 
A) Couple acting at that point 
B) Couple acting at some other point 
C) Concentrated load at the point 
D) Uniformly distributed load or Uniformly varying load on the beam

Question 16

In bending moment diagram, if no load acts between two sections, then it is represented by

Accepted Answer

A) horizontal line 
B) inclined line 
C) vertical line 
D) all of the above 
A) horizontal line 
B) inclined line 
C) vertical line 
D) all of the above

Question 17

SI units of Bending moment is

Accepted Answer

A) kN 
B) kN2 
C) kNm 
D) km 
A) kN 
B) kN2 
C) kNm 
D) km

Question 18

Bending equation is applicable to a beam of

Accepted Answer

A) Heterogeneous material 
B) Homogeneous material 
C) Alloy 
D) None 
A) Heterogeneous material 
B) Homogeneous material 
C) Alloy 
D) None

Question 19

The beam having one end free and one end fixed is called as

Accepted Answer

A) Cantilever beam 
B) Continuous beam 
C) Overhang beam 
D) Simply supported beam 
A) Cantilever beam 
B) Continuous beam 
C) Overhang beam 
D) Simply supported beam

Question 20

A beam is said to be of uniform strength, if

Accepted Answer

A) B.M. is same throughout the beam 
B) Shear stress is the same through the beam 
C) Deflection is the same throughout the beam 
D) Bending stress is the same at every section along its longitudinal axis 
A) B.M. is same throughout the beam 
B) Shear stress is the same through the beam 
C) Deflection is the same throughout the beam 
D) Bending stress is the same at every section along its longitudinal axis

For any part of the beam, between two concentrated load Shear force diagram is a

In a composite beam bending, strain at the common interface will be

Net force acting on the cross section of beam in bending is

What is the other name for a positive bending moment?

Which is more stronger in bending equal area square or circular beam

What is the maximum bending moment acting on simply supported beam shown below?

At a point in a simply supported or overhanging beam where Shear force changes sign and Bending moment is

Net force acting on the cross section of beam in bending is

What is the maximum shear force acting on the beam shown below.

A 10 m long cantilever beam is fixed at point B. What is the bending moment at point B, if 5 m span of AC carries uniform distributed load of 10 kN/m

The diagram shown below, depicts bending diagram for

Brittle material beams need reinforcement on the

What is the product of sectional modulus and allowable bending stress called as?

For any part of a beam subjected to uniformly distributed load, bending moment diagram is

A sudden jump anywhere on the Bending moment diagram of a beam is caused by

In bending moment diagram, if no load acts between two sections, then it is represented by

SI units of Bending moment is

Bending equation is applicable to a beam of

The beam having one end free and one end fixed is called as

A beam is said to be of uniform strength, if

Mechanical Properties and Deformation of Materials

Columns, Beams and Shear Force Diagrams

Materials Mechanics and Elasticity

Mechanics of Materials: Understanding Stress, Strain, and Energy Storage in Materials

Moment of Inertia, Bending Moment, and Shear Force for Beams

Understanding Bending Stresses in Beams

Filters

Exam 6: Bending Moment and Shear Force Diagrams for Beams

For any part of the beam, between two concentrated load Shear force diagram is a

In a composite beam bending, strain at the common interface will be

Net force acting on the cross section of beam in bending is

What is the other name for a positive bending moment?

Which is more stronger in bending equal area square or circular beam

What is the maximum bending moment acting on simply supported beam shown below?

At a point in a simply supported or overhanging beam where Shear force changes sign and Bending moment is

Net force acting on the cross section of beam in bending is

What is the maximum shear force acting on the beam shown below.

A 10 m long cantilever beam is fixed at point B. What is the bending moment at point B, if 5 m span of AC carries uniform distributed load of 10 kN/m

The diagram shown below, depicts bending diagram for

Brittle material beams need reinforcement on the

What is the product of sectional modulus and allowable bending stress called as?

For any part of a beam subjected to uniformly distributed load, bending moment diagram is

A sudden jump anywhere on the Bending moment diagram of a beam is caused by

In bending moment diagram, if no load acts between two sections, then it is represented by

SI units of Bending moment is

Bending equation is applicable to a beam of

The beam having one end free and one end fixed is called as

A beam is said to be of uniform strength, if

Mechanical Properties and Deformation of Materials

Columns, Beams and Shear Force Diagrams

Materials Mechanics and Elasticity

Mechanics of Materials: Understanding Stress, Strain, and Energy Storage in Materials

Moment of Inertia, Bending Moment, and Shear Force for Beams

Understanding Bending Stresses in Beams

Filters