Exam 11: Network Theorems
Exam 1: Introduction45 Questions
Exam 2: Electricity39 Questions
Exam 3: Resistors46 Questions
Exam 4: Ohms Law42 Questions
Exam 5: Series Circuits45 Questions
Exam 6: Parallel Circuits45 Questions
Exam 7: Series-Parallel Circuits47 Questions
Exam 8: Voltage Dividers and Current Dividers43 Questions
Exam 9: Analog and Digital Multimeters47 Questions
Exam 10: Kirchhoff S Laws42 Questions
Exam 11: Network Theorems47 Questions
Exam 12: Conductors and Insulators47 Questions
Exam 13: Batteries46 Questions
Exam 14: Magnetism43 Questions
Exam 15: Electromagnetism48 Questions
Exam 16: Alternating Voltage and Current42 Questions
Exam 17: Capacitance49 Questions
Exam 18: Capacitive Reactance37 Questions
Exam 19: Capacitive Circuits49 Questions
Exam 20: Inductance45 Questions
Exam 21: Inductive Reactance41 Questions
Exam 22: Inductive Circuits44 Questions
Exam 23: RC and LR Time Constants44 Questions
Exam 24: Alternating Current Circuits50 Questions
Exam 25: Complex Numbers for Ac Circuits44 Questions
Exam 26: Resonance50 Questions
Exam 27: Filters46 Questions
Exam 28: Three-Phase Ac Power Systems49 Questions
Exam 29: Diodes and Diode Applications44 Questions
Exam 30: Bipolar Junction Transistors42 Questions
Exam 31: Transistor Amplifiers47 Questions
Exam 32: Field Effect Transistors45 Questions
Exam 33: Power Amplifiers47 Questions
Exam 34: Thyristors43 Questions
Exam 35: Operational Amplifiers49 Questions
Select questions type
Delta (or Wye) ______________ are generally used in three-phase ac power circuits.
Free
(Short Answer)
4.9/5
(30)
Correct Answer:
networks
Network theorems usually provide shorter methods than Kirchhoff's laws for solving a circuit.
Free
(True/False)
4.8/5
(39)
Correct Answer:
True
Components such as transistors, semiconductor diodes, and electron tubes are
Free
(Multiple Choice)
4.7/5
(34)
Correct Answer:
D
When all the R values are equal in a network, it is ______________.
(Short Answer)
4.9/5
(36)
A combination of components, such as resistances, interconnected to achieve a particular end result is a
(Multiple Choice)
4.8/5
(40)
______________ theorem provides a shortcut for finding the common voltage across any number of parallel branches with different voltage sources.
(Short Answer)
4.9/5
(40)
While using superposition, disabling a source so that it cannot generate voltage or current without changing the resistance of the circuit is called
(Multiple Choice)
5.0/5
(40)
What theorem or law states that in a network with two or more sources, the current or voltage for any component is the algebraic sum of the effects produced by each source acting separately?
(Multiple Choice)
4.8/5
(34)
The expression, temporarily killing a source means disabling the source so that it cannot generate voltage or current without changing the resistance of the circuit.
(True/False)
4.7/5
(31)
Of all the different theorems, the superposition theorem is by far the most widely used.
(True/False)
4.8/5
(42)
When using superposition, linear means that the current is proportional to the applied voltage.
(True/False)
4.7/5
(33)
Networks with resistors, capacitors, and air-core inductors are generally linear and bilateral.
(True/False)
4.8/5
(34)
When the current is the same amount for opposite polarities of the source voltage, it is
(Multiple Choice)
4.8/5
(41)
The accepted assumption is that an ideal voltage source has an internal resistance of
(Multiple Choice)
4.8/5
(28)
______________ theorem is used to simplify a network in terms of currents instead of voltages.
(Short Answer)
4.8/5
(38)
A current source symbol with a dashed or broken arrow indicates the direction of ______________ current flow.
(Short Answer)
4.9/5
(32)
Thevenin's theorem cannot be used to find the current through a resistor that is in the center of a bridge circuit.
(True/False)
4.8/5
(32)
When using superposition, bilateral means that the current is the same amount for opposite polarities of the source voltage.
(True/False)
4.9/5
(35)
Showing 1 - 20 of 47
Filters
- Essay(0)
- Multiple Choice(0)
- Short Answer(0)
- True False(0)
- Matching(0)