Question 1

Static routing is a technique in which a network administrator programs a router to use specific paths between nodes.

Accepted Answer

A) True 
 B)False  True

Question 2

A(n) ____________________ is a device that enables a workstation to connect to the network and communicate with other computers.

Accepted Answer

network interface card , NIC

Question 3

What term is used to describe the time it takes for a router to recognize a best path in the event of a change or outage?

Accepted Answer

Convergence time

Question 4

Which of the following is a connectivity device that operates at the Data Link layer of the OSI model and reads header information to forward packets according to their MAC addresses?

Accepted Answer

A)  Bridge 
B)  Buffering 
C)  Dynamic routing 
D)  Firewall 
A)  Bridge 
B)  Buffering 
C)  Dynamic routing 
D)  Firewall

Question 5

Which of the following is a standard external bus that can be used to connect multiple types of peripherals, including modems?

Accepted Answer

A)  PCMCIA 
B)  USB 
C)  MNP4 
D)  NIC 
A)  PCMCIA 
B)  USB 
C)  MNP4 
D)  NIC

Question 6

Hardware flow control separates flow control information from the data being sent. _________________________

Accepted Answer

A) True 
 B)False

Question 7

A method of gauging the rate at which two modems can exchange data, is known as:

Accepted Answer

A)  Spanning tree algorithm 
B)  Remote control 
C)  Dynamic routing 
D)  Software flow control 
A)  Spanning tree algorithm 
B)  Remote control 
C)  Dynamic routing 
D)  Software flow control

Question 8

The circuit that is used by the system board to transmit data to the computer's components is the computer's bus.

Accepted Answer

A) True 
 B)False

Question 9

The term best path refers to the most efficient route from one node on a network to another. _________________________

Accepted Answer

A) True 
 B)False

Question 10

Match each statement below with the correct item
-Connects networks that use different logical topologies.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch 
A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 11

A switch running in cut-through mode reads a frame's header and decides where to forward the data, before it receives the entire packet.

Accepted Answer

A) True 
 B)False

Question 12

Match each statement below with the correct item
-A technique in which a network administrator manually programs a router to use specific paths between nodes.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch 
A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 13

Match each statement below with the correct item
-The type of circuit used by a computer's system board to transmit data to components.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch 
A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 14

A(n) firewall is a specialized computer that selectively filters or blocks traffic between networks. _________________________

Accepted Answer

A) True 
 B)False

Question 15

A connectivity device on data networks that logically subdivides a network into smaller, individual collision domains, is referred to as:

Accepted Answer

A)  Hub 
B)  Bridge 
C)  Switch 
D)  Modular router 
A)  Hub 
B)  Bridge 
C)  Switch 
D)  Modular router

Question 16

USB is a standard external bus that can be used to connect multiple types of peripherals.

Accepted Answer

A) True 
 B)False

Question 17

Which of the following describes the time it takes for a router to recognize a best path, in the event of a change or outage?

Accepted Answer

A)  Buffering 
B)  Convergence time 
C)  Hop 
D)  Intelligent hub 
A)  Buffering 
B)  Convergence time 
C)  Hop 
D)  Intelligent hub

Question 18

Which of the following is a group of connected nodes that share broadcast traffic?

Accepted Answer

A)  Buffer 
B)  Gateway 
C)  Broadcast domain 
D)  Pair gain 
A)  Buffer 
B)  Gateway 
C)  Broadcast domain 
D)  Pair gain

Question 19

A(n) buffer is a logically defined area of a computer's memory where data is temporarily stored until it is requested by software, or until it is cleared. _________________________

Accepted Answer

A) True 
 B)False

Question 20

The point at the central office where multiplexed signals from several subscriber lines are separated, is known as:

Accepted Answer

A)  Broadcast domain 
B)  Local exchange terminal 
C)  Bridge 
D)  Central office terminal 
A)  Broadcast domain 
B)  Local exchange terminal 
C)  Bridge 
D)  Central office terminal

Static routing is a technique in which a network administrator programs a router to use specific paths between nodes.

A(n) ____________________ is a device that enables a workstation to connect to the network and communicate with other computers.

What term is used to describe the time it takes for a router to recognize a best path in the event of a change or outage?

Which of the following is a connectivity device that operates at the Data Link layer of the OSI model and reads header information to forward packets according to their MAC addresses?

Which of the following is a standard external bus that can be used to connect multiple types of peripherals, including modems?

Hardware flow control separates flow control information from the data being sent. _________________________

A method of gauging the rate at which two modems can exchange data, is known as:

The circuit that is used by the system board to transmit data to the computer's components is the computer's bus.

The term best path refers to the most efficient route from one node on a network to another. _________________________

Match each statement below with the correct item -Connects networks that use different logical topologies.

A switch running in cut-through mode reads a frame's header and decides where to forward the data, before it receives the entire packet.

Match each statement below with the correct item -A technique in which a network administrator manually programs a router to use specific paths between nodes.

Match each statement below with the correct item -The type of circuit used by a computer's system board to transmit data to components.

A(n) firewall is a specialized computer that selectively filters or blocks traffic between networks. _________________________

A connectivity device on data networks that logically subdivides a network into smaller, individual collision domains, is referred to as:

USB is a standard external bus that can be used to connect multiple types of peripherals.

Which of the following describes the time it takes for a router to recognize a best path, in the event of a change or outage?

Which of the following is a group of connected nodes that share broadcast traffic?

A(n) buffer is a logically defined area of a computer's memory where data is temporarily stored until it is requested by software, or until it is cleared. _________________________

The point at the central office where multiplexed signals from several subscriber lines are separated, is known as:

Telecommunications Overview

Principles of Telecommunications Technology

The Evolution of Telecommunications Technology and Policy

The Public Network

Customer Premise Equipment and Applications

Signaling and Switching

Data Networking Fundamentals

Physical Transmission Media

Wireless Transmission and Services

Network Access and Transmission Methods

Internet Standards and Services

Information Security

Convergence of Voice, Video, and Data

Filters

Exam 11: Data Network Connectivity

Static routing is a technique in which a network administrator programs a router to use specific paths between nodes.

A(n) ____________________ is a device that enables a workstation to connect to the network and communicate with other computers.

What term is used to describe the time it takes for a router to recognize a best path in the event of a change or outage?

Which of the following is a connectivity device that operates at the Data Link layer of the OSI model and reads header information to forward packets according to their MAC addresses?

Which of the following is a standard external bus that can be used to connect multiple types of peripherals, including modems?

Hardware flow control separates flow control information from the data being sent. _________________________

A method of gauging the rate at which two modems can exchange data, is known as:

The circuit that is used by the system board to transmit data to the computer's components is the computer's bus.

The term best path refers to the most efficient route from one node on a network to another. _________________________

Match each statement below with the correct item -Connects networks that use different logical topologies.

A switch running in cut-through mode reads a frame's header and decides where to forward the data, before it receives the entire packet.

Match each statement below with the correct item -A technique in which a network administrator manually programs a router to use specific paths between nodes.

Match each statement below with the correct item -The type of circuit used by a computer's system board to transmit data to components.

A(n) firewall is a specialized computer that selectively filters or blocks traffic between networks. _________________________

A connectivity device on data networks that logically subdivides a network into smaller, individual collision domains, is referred to as:

USB is a standard external bus that can be used to connect multiple types of peripherals.

Which of the following describes the time it takes for a router to recognize a best path, in the event of a change or outage?

Which of the following is a group of connected nodes that share broadcast traffic?

A(n) buffer is a logically defined area of a computer's memory where data is temporarily stored until it is requested by software, or until it is cleared. _________________________

The point at the central office where multiplexed signals from several subscriber lines are separated, is known as:

Telecommunications Overview

Principles of Telecommunications Technology

The Evolution of Telecommunications Technology and Policy

The Public Network

Customer Premise Equipment and Applications

Signaling and Switching

Data Networking Fundamentals

Physical Transmission Media

Wireless Transmission and Services

Network Access and Transmission Methods

Internet Standards and Services

Information Security

Convergence of Voice, Video, and Data

Filters