Question 1

The microprocessor's internal clock sets the time of day.

Accepted Answer

A) True 
 B)False

Question 2

Match each statement with an item
-Handles recently accessed data to be passed on to the L1 cache when needed.

Accepted Answer

A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory 
A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory

Question 3

Match each statement with an item
-A small RAM chip built into the CPU.

Accepted Answer

A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory 
A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory

Question 4

If the fdisk command output displays Disk /dev/hda: 21.5 GB, 21474836480 bytes, what type of hard drive is in use?

Accepted Answer

A)  SCSI 
B)  IDE 
C)  PATA 
D)  SATA 
A)  SCSI 
B)  IDE 
C)  PATA 
D)  SATA

Question 5

A 32-bit processor can store ____-bit numbers.

Accepted Answer

A)  12 
B)  16 
C)  32 
D)  64 
A)  12 
B)  16 
C)  32 
D)  64

Question 6

____________________ divides a hard drive into logical sections; each one is a contiguous section of blocks treated as a separate physical drive.

Accepted Answer

The answer of ____________________ divides a hard drive into logical...

Question 7

Typically, the control unit loads commands that are sent to the arithmetic logic unit for execution.

Accepted Answer

A) True 
 B)False

Question 8

With 32-bit processors, you can access up to ____ GB RAM.

Accepted Answer

A)  2 
B)  4 
C)  8 
D)  16 
A)  2 
B)  4 
C)  8 
D)  16

Question 9

You can have exactly ____ per primary partition.

Accepted Answer

A)  one extended partition 
B)  four extended partitions 
C)  four logical partitions 
D)  one swap partition 
A)  one extended partition 
B)  four extended partitions 
C)  four logical partitions 
D)  one swap partition

Question 10

Video adapter cards are expansion devices that plug into a ____ on the motherboard.

Accepted Answer

A)  plug 
B)  circuit 
C)  port 
D)  bus 
A)  plug 
B)  circuit 
C)  port 
D)  bus

Question 11

In Windows, explain how to determine what type of hardware you have, if you do not have the manual.

Accepted Answer

If you do not have the manual and your c

Question 12

A(n) ____________________ is a channel for connecting hardware components to a processor and can be used to swap hardware, such as replacing an existing video card with a faster one.

Accepted Answer

The answer of A(n) ____________________ is a channel for connecting...

Question 13

Explain how to create an AutoYaST profile.

Accepted Answer

You can create an AutoYaST profile manua

Question 14

You must have long-term storage devices for a Linux installation.

Accepted Answer

A) True 
 B)False

Question 15

The act of reprogramming EEPROM is called ____.

Accepted Answer

A)  rebooting 
B)  restarting 
C)  flashing 
D)  caching 
A)  rebooting 
B)  restarting 
C)  flashing 
D)  caching

Question 16

____________________ is RAM built into the CPU that is used to store frequently accessed data and instructions.

Accepted Answer

The answer of ____________________ is RAM built into the CPU...

Question 17

Match each statement with an item
-Nonvolatile memory that is very similar to EEPROM but is considerably faster because it writes data in larger blocks.

Accepted Answer

A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory 
A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory

Question 18

Match each statement with an item
-Incorporated into the CPU and shared across L1 and L2 caches in each core for fast CPU performance.

Accepted Answer

A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory 
A)  L1 cache 
B)  L2 cache 
C)  L3 cache 
D)  DRAM 
E)  SRAM
F) PROM
G) EPROM
H) EEPROM
I) Flash memory

Question 19

Linux supports a maximum of ____ primary partitions on a hard disk.

Accepted Answer

A)  two 
B)  three 
C)  four 
D)  six 
A)  two 
B)  three 
C)  four 
D)  six

Question 20

What command is used to determine the processor type installed in a Linux machine?

Accepted Answer

A)  uname -m 
B)  uname -n 
C)  fdisk -m 
D)  fdisk -n 
A)  uname -m 
B)  uname -n 
C)  fdisk -m 
D)  fdisk -n

The microprocessor's internal clock sets the time of day.

Match each statement with an item -Handles recently accessed data to be passed on to the L1 cache when needed.

Match each statement with an item -A small RAM chip built into the CPU.

If the fdisk command output displays Disk /dev/hda: 21.5 GB, 21474836480 bytes, what type of hard drive is in use?

A 32-bit processor can store ____-bit numbers.

____________________ divides a hard drive into logical sections; each one is a contiguous section of blocks treated as a separate physical drive.

Typically, the control unit loads commands that are sent to the arithmetic logic unit for execution.

With 32-bit processors, you can access up to ____ GB RAM.

You can have exactly ____ per primary partition.

Video adapter cards are expansion devices that plug into a ____ on the motherboard.

In Windows, explain how to determine what type of hardware you have, if you do not have the manual.

A(n) ____________________ is a channel for connecting hardware components to a processor and can be used to swap hardware, such as replacing an existing video card with a faster one.

Explain how to create an AutoYaST profile.

You must have long-term storage devices for a Linux installation.

The act of reprogramming EEPROM is called ____.

____________________ is RAM built into the CPU that is used to store frequently accessed data and instructions.

Match each statement with an item -Nonvolatile memory that is very similar to EEPROM but is considerably faster because it writes data in larger blocks.

Match each statement with an item -Incorporated into the CPU and shared across L1 and L2 caches in each core for fast CPU performance.

Linux supports a maximum of ____ primary partitions on a hard disk.

What command is used to determine the processor type installed in a Linux machine?

Introduction to the Linux Operating System

Installing Opensuse

Managing Files and Directories

Creating and Editing Files With Text Editors

Creating Shell Scripts and Displaying File Contents

Managing Data: Backup and Recovery Processes

Managing Users and Groups

Network Communications

Installing Software Packages

Apache Web Server

Domain Name System

Configuring a Mail Server

Working With the Network File System

Linux File System Management and Administration

Managing Resources in Linux

Networking in a Linux Environment

Using Samba for Interoperating Linux and Windows

Securing Linux

Advanced Linux Administration

Filters

Exam 14: Planning for a Linux Installation

The microprocessor's internal clock sets the time of day.

Match each statement with an item -Handles recently accessed data to be passed on to the L1 cache when needed.

Match each statement with an item -A small RAM chip built into the CPU.

If the fdisk command output displays Disk /dev/hda: 21.5 GB, 21474836480 bytes, what type of hard drive is in use?

A 32-bit processor can store ____-bit numbers.

____________________ divides a hard drive into logical sections; each one is a contiguous section of blocks treated as a separate physical drive.

Typically, the control unit loads commands that are sent to the arithmetic logic unit for execution.

With 32-bit processors, you can access up to ____ GB RAM.

You can have exactly ____ per primary partition.

Video adapter cards are expansion devices that plug into a ____ on the motherboard.

In Windows, explain how to determine what type of hardware you have, if you do not have the manual.

A(n) ____________________ is a channel for connecting hardware components to a processor and can be used to swap hardware, such as replacing an existing video card with a faster one.

Explain how to create an AutoYaST profile.

You must have long-term storage devices for a Linux installation.

The act of reprogramming EEPROM is called ____.

____________________ is RAM built into the CPU that is used to store frequently accessed data and instructions.

Match each statement with an item -Nonvolatile memory that is very similar to EEPROM but is considerably faster because it writes data in larger blocks.

Match each statement with an item -Incorporated into the CPU and shared across L1 and L2 caches in each core for fast CPU performance.

Linux supports a maximum of ____ primary partitions on a hard disk.

What command is used to determine the processor type installed in a Linux machine?

Introduction to the Linux Operating System

Installing Opensuse

Managing Files and Directories

Creating and Editing Files With Text Editors

Creating Shell Scripts and Displaying File Contents

Managing Data: Backup and Recovery Processes

Managing Users and Groups

Network Communications

Installing Software Packages

Apache Web Server

Domain Name System

Configuring a Mail Server

Working With the Network File System

Linux File System Management and Administration

Managing Resources in Linux

Networking in a Linux Environment

Using Samba for Interoperating Linux and Windows

Securing Linux

Advanced Linux Administration

Filters