Question 1

An IPv4 packet's protocol field value is 1.The data field contains a(n)________ message.

Accepted Answer

A) TCP 
B) UDP 
C) ICMP 
D) DNS 
A) TCP 
B) UDP 
C) ICMP 
D) DNS

Question 2

Which of the following is connectionless?

Accepted Answer

A) TCP 
B) UDP 
C) both A and B 
D) neither A nor B 
A) TCP 
B) UDP 
C) both A and B 
D) neither A nor B

Question 3

TCP messages are called ________.

Accepted Answer

A) frames 
B) packets 
C) segments 
D) fragments 
A) frames 
B) packets 
C) segments 
D) fragments

Question 4

The new version of Internet Protocol that is coming into use is IP version ________.

Accepted Answer

A) 1 
B) 4 
C) 5 
D) 6 
A) 1 
B) 4 
C) 5 
D) 6

Question 5

In IPv6,the payload length gives the number of octets in the ________.

Accepted Answer

A) entire packet 
B) entire packet minus the main header 
C) entire packet minus the main and extension headers 
D) entire packet minus the extension headers 
A) entire packet 
B) entire packet minus the main header 
C) entire packet minus the main and extension headers 
D) entire packet minus the extension headers

Question 6

An autonomous system is free to select whatever ________ dynamic routing protocol it wishes.

Accepted Answer

A) interior 
B) exterior 
C) both A and B 
A) interior 
B) exterior 
C) both A and B

Question 7

In a network mask,the 1s correspond to the ________.

Accepted Answer

A) network part 
B) subnet part 
C) host part 
D) none of the above 
A) network part 
B) subnet part 
C) host part 
D) none of the above

Question 8

Converting networks to support IPv6 is relatively simple and inexpensive.

Accepted Answer

A) True 
 B)False

Question 9

Dynamic ________ protocols allow routers to transmit routing table information to one another.

Accepted Answer

A) routing 
B) transport 
C) synchronization 
D) none of the above 
A) routing 
B) transport 
C) synchronization 
D) none of the above

Question 10

Which of the following can route non-IP packets?

Accepted Answer

A) OSPF 
B) EIGRP 
C) both A and B 
D) neither A nor B 
A) OSPF 
B) EIGRP 
C) both A and B 
D) neither A nor B

Question 11

A router must use the ARP process ________.

Accepted Answer

A) when a new router comes online 
B) when a router goes offline 
C) whenever it forwards an IP packet 
D) whenever it forwards an IP packet to a host that is not in its ARP cache 
A) when a new router comes online 
B) when a router goes offline 
C) whenever it forwards an IP packet 
D) whenever it forwards an IP packet to a host that is not in its ARP cache

Question 12

The default row ________.

Accepted Answer

A) always has the mask /32 
B) will always match the IP address of an incoming packet 
C) both A and B 
D) neither A nor B 
A) always has the mask /32 
B) will always match the IP address of an incoming packet 
C) both A and B 
D) neither A nor B

Question 13

In TCP/IP,routing means ________.

Accepted Answer

A) the process that routers use to forward incoming packets 
B) the process that routers use to exchange routing table information 
C) both A and B 
D) neither A nor B 
A) the process that routers use to forward incoming packets 
B) the process that routers use to exchange routing table information 
C) both A and B 
D) neither A nor B

Question 14

Which of the following is one of the three parts of an IPv4 address?

Accepted Answer

A) subnet part 
B) mask 
C) both A and B 
D) neither A nor B 
A) subnet part 
B) mask 
C) both A and B 
D) neither A nor B

Question 15

Pinging sends ICMP ________ messages to the target host.

Accepted Answer

A) echo 
B) error advisement 
C) both A and B 
D) neither A nor B 
A) echo 
B) error advisement 
C) both A and B 
D) neither A nor B

Question 16

Routers send packets out ________.

Accepted Answer

A) ports 
B) connections 
C) interfaces 
D) plugs 
A) ports 
B) connections 
C) interfaces 
D) plugs

Question 17

The total length of an IPv4 address is ________ bits.

Accepted Answer

A) 8 
B) 16 
C) 32 
D) We cannot say. 
A) 8 
B) 16 
C) 32 
D) We cannot say.

Question 18

A(n)________ must find the best-matching row in its ________ table by comparing several row matches.

Accepted Answer

A) ethernet switch, switching 
B) router, routing 
C) both A and B 
D) neither A nor B 
A) ethernet switch, switching 
B) router, routing 
C) both A and B 
D) neither A nor B

Question 19

An autonomous system can freely select the exterior dynamic routing protocol it will use.

Accepted Answer

A) True 
 B)False

Question 20

One-bit fields are called ________ fields.

Accepted Answer

A) SYN 
B) flag 
C) ACK 
D) none of the above 
A) SYN 
B) flag 
C) ACK 
D) none of the above

An IPv4 packet's protocol field value is 1.The data field contains a(n)________ message.

Which of the following is connectionless?

TCP messages are called ________.

The new version of Internet Protocol that is coming into use is IP version ________.

In IPv6,the payload length gives the number of octets in the ________.

An autonomous system is free to select whatever ________ dynamic routing protocol it wishes.

In a network mask,the 1s correspond to the ________.

Converting networks to support IPv6 is relatively simple and inexpensive.

Dynamic ________ protocols allow routers to transmit routing table information to one another.

Which of the following can route non-IP packets?

A router must use the ARP process ________.

The default row ________.

In TCP/IP,routing means ________.

Which of the following is one of the three parts of an IPv4 address?

Pinging sends ICMP ________ messages to the target host.

Routers send packets out ________.

The total length of an IPv4 address is ________ bits.

A(n) must find the best-matching row in its table by comparing several row matches.

An autonomous system can freely select the exterior dynamic routing protocol it will use.

One-bit fields are called ________ fields.

Welcome to the Cloud

Network Standards

Network Security

Network Management

Wired Ethernet Lans

Wireless Lans I

Wireless Lans 2

Tcpip Internetworking 2

Wide Area Networks

Networked Applications

Module a More on Tcp

Module B More on Modulation

Module C More on Telecommunications

Module D Directory Servers

Filters

Exam 8: Tcpip Internetworking I

An IPv4 packet's protocol field value is 1.The data field contains a(n)________ message.

Which of the following is connectionless?

TCP messages are called ________.

The new version of Internet Protocol that is coming into use is IP version ________.

In IPv6,the payload length gives the number of octets in the ________.

An autonomous system is free to select whatever ________ dynamic routing protocol it wishes.

In a network mask,the 1s correspond to the ________.

Converting networks to support IPv6 is relatively simple and inexpensive.

Dynamic ________ protocols allow routers to transmit routing table information to one another.

Which of the following can route non-IP packets?

A router must use the ARP process ________.

The default row ________.

In TCP/IP,routing means ________.

Which of the following is one of the three parts of an IPv4 address?

Pinging sends ICMP ________ messages to the target host.

Routers send packets out ________.

The total length of an IPv4 address is ________ bits.

A(n)________ must find the best-matching row in its ________ table by comparing several row matches.

An autonomous system can freely select the exterior dynamic routing protocol it will use.

One-bit fields are called ________ fields.

Welcome to the Cloud

Network Standards

Network Security

Network Management

Wired Ethernet Lans

Wireless Lans I

Wireless Lans 2

Tcpip Internetworking 2

Wide Area Networks

Networked Applications

Module a More on Tcp

Module B More on Modulation

Module C More on Telecommunications

Module D Directory Servers

Filters

A(n) must find the best-matching row in its table by comparing several row matches.