Question 1

Which of the following is used to configure wireless cells for roaming?

Accepted Answer

A) IAPP 
B) ESS 
C) PPTP 
D) L2TP 
A) IAPP 
B) ESS 
C) PPTP 
D) L2TP A

Question 2

In Windows 7 and Windows Server,you can get a basic picture of bandwidth utilization through which of the following tools?

Accepted Answer

A) Task Manager 
B) UAC 
C) Event Viewer 
D) tcpdump 
A) Task Manager 
B) UAC 
C) Event Viewer 
D) tcpdump A

Question 3

If you need to employ security by disallowing users from one department or network segment from access another department's resources,which should you use?

Accepted Answer

A) bridges 
B) hubs 
C) routers 
D) switches 
A) bridges 
B) hubs 
C) routers 
D) switches C

Question 4

What are the advantages and disadvantages of locating hosts and servers throughout the network?

Accepted Answer

The advantage of locating hosts and serv

Question 5

Which cabling type is a good fit to use as a backbone between floors of a building?

Accepted Answer

A) fiber-optic 
B) Coaxial 
C) Plenum rated 
D) Category 5e 
A) fiber-optic 
B) Coaxial 
C) Plenum rated 
D) Category 5e

Question 6

Which of the following is likely to have the heaviest network traffic?

Accepted Answer

A) on a home network without a server 
B) on a business peer-to-peer network that shares Word and Excel files 
C) to and from a room that houses a server farm 
D) to a server in an office that has multiple servers performing distributed tasks 
A) on a home network without a server 
B) on a business peer-to-peer network that shares Word and Excel files 
C) to and from a room that houses a server farm 
D) to a server in an office that has multiple servers performing distributed tasks

Question 7

A(n)_________________________ is a customized integrated circuit on a chip,containing logic for a specific application,such as fast routing logic.

Accepted Answer

application-specific integrate

Question 8

Match each term with the correct statement below.
-enables you to segment networks and control network traffic.

Accepted Answer

A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable 
A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable

Question 9

In a wireless network design with two or more access points,cells are configured to enable roaming through using the same roaming protocol.

Accepted Answer

A) True 
 B)False

Question 10

Which of the following standards should be followed when performing cable installations?

Accepted Answer

A) EIA/TIA-515 
B) ANSI-568 
C) EIA/TIA-568-C 
D) ITU-T 
A) EIA/TIA-515 
B) ANSI-568 
C) EIA/TIA-568-C 
D) ITU-T

Question 11

Which type of device can perform similar functions as a router?

Accepted Answer

A) layer 2 bridges 
B) layer 3 switches 
C) layer 4 hubs 
D) network layer MAUs 
A) layer 2 bridges 
B) layer 3 switches 
C) layer 4 hubs 
D) network layer MAUs

Question 12

Which of the following is true of full-duplex communications? (Choose all that apply.)

Accepted Answer

A) eliminates collisions 
B) allows transmission and reception on the same wire, but not simultaneously 
C) should not be used between switches and routers 
D) there is a reduction in lost frames 
A) eliminates collisions 
B) allows transmission and reception on the same wire, but not simultaneously 
C) should not be used between switches and routers 
D) there is a reduction in lost frames

Question 13

Match each term with the correct statement below.
-does not give off noxious chemicals when exposed to flames.

Accepted Answer

A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable 
A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable

Question 14

How does LAN design relate to the need for WAN connectivity?

Accepted Answer

Some LANs only require basic WAN connect

Question 15

____________________ involves running duplicate links in an aggregate that is treated as one link that has the total speed of each link added together.

Accepted Answer

The answer of ____________________ involves running duplicate links in an...

Question 16

Match each term with the correct statement below.
-SNMP capable information-gathering switches dispersed on each floor to provide the network management station with continuous information about all parts of the network.

Accepted Answer

A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable 
A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable

Question 17

Match each term with the correct statement below.
-provides guidelines for how to properly ground all cable plants.

Accepted Answer

A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable 
A) Inter-Access Point Protocol (IAPP) 
B) EIA/TIA-607 standard. 
C) single-mode fiber-optic cable 
D) uninterruptible power source (UPS) 
E) network agents
F)tcpdump utility
G)plenum cable
H)router
I)riser cable

Question 18

Using the ring topology between building floors follows the EIA/TIA 568-B and EIA/TIA-568-C specifications.

Accepted Answer

A) True 
 B)False

Question 19

The number one task when designing a network is to bid the lowest price possible for what you think are the customer's network needs.

Accepted Answer

A) True 
 B)False

Question 20

Which of the following can provide both higher speed connections and redundancy?

Accepted Answer

A) link aggregation 
B) line separation 
C) link multiplexing 
D) link duplexing 
A) link aggregation 
B) line separation 
C) link multiplexing 
D) link duplexing

Which of the following is used to configure wireless cells for roaming?

In Windows 7 and Windows Server,you can get a basic picture of bandwidth utilization through which of the following tools?

If you need to employ security by disallowing users from one department or network segment from access another department's resources,which should you use?

What are the advantages and disadvantages of locating hosts and servers throughout the network?

Which cabling type is a good fit to use as a backbone between floors of a building?

Which of the following is likely to have the heaviest network traffic?

A(n)_________________________ is a customized integrated circuit on a chip,containing logic for a specific application,such as fast routing logic.

Match each term with the correct statement below. -enables you to segment networks and control network traffic.

In a wireless network design with two or more access points,cells are configured to enable roaming through using the same roaming protocol.

Which of the following standards should be followed when performing cable installations?

Which type of device can perform similar functions as a router?

Which of the following is true of full-duplex communications? (Choose all that apply.)

Match each term with the correct statement below. -does not give off noxious chemicals when exposed to flames.

How does LAN design relate to the need for WAN connectivity?

____________________ involves running duplicate links in an aggregate that is treated as one link that has the total speed of each link added together.

Match each term with the correct statement below. -SNMP capable information-gathering switches dispersed on each floor to provide the network management station with continuous information about all parts of the network.

Match each term with the correct statement below. -provides guidelines for how to properly ground all cable plants.

Using the ring topology between building floors follows the EIA/TIA 568-B and EIA/TIA-568-C specifications.

The number one task when designing a network is to bid the lowest price possible for what you think are the customer's network needs.

Which of the following can provide both higher speed connections and redundancy?

Networking: an Overview

How Lan and Wan Communications Work

Using Network Communication Protocols

Connecting Through a Cabled Network

Devices for Connecting Networks

Connecting Through a Wireless Network

Sharing Resources on a Network

Using a Server

Understanding Wan Connection Choices

Securing Your Network

Maintaining and Troubleshooting Your Network

Filters

Exam 10: Basic Network Design

Which of the following is used to configure wireless cells for roaming?

In Windows 7 and Windows Server,you can get a basic picture of bandwidth utilization through which of the following tools?

If you need to employ security by disallowing users from one department or network segment from access another department's resources,which should you use?

What are the advantages and disadvantages of locating hosts and servers throughout the network?

Which cabling type is a good fit to use as a backbone between floors of a building?

Which of the following is likely to have the heaviest network traffic?

A(n)_________________________ is a customized integrated circuit on a chip,containing logic for a specific application,such as fast routing logic.

Match each term with the correct statement below. -enables you to segment networks and control network traffic.

In a wireless network design with two or more access points,cells are configured to enable roaming through using the same roaming protocol.

Which of the following standards should be followed when performing cable installations?

Which type of device can perform similar functions as a router?

Which of the following is true of full-duplex communications? (Choose all that apply.)

Match each term with the correct statement below. -does not give off noxious chemicals when exposed to flames.

How does LAN design relate to the need for WAN connectivity?

____________________ involves running duplicate links in an aggregate that is treated as one link that has the total speed of each link added together.

Match each term with the correct statement below. -SNMP capable information-gathering switches dispersed on each floor to provide the network management station with continuous information about all parts of the network.

Match each term with the correct statement below. -provides guidelines for how to properly ground all cable plants.

Using the ring topology between building floors follows the EIA/TIA 568-B and EIA/TIA-568-C specifications.

The number one task when designing a network is to bid the lowest price possible for what you think are the customer's network needs.

Which of the following can provide both higher speed connections and redundancy?

Networking: an Overview

How Lan and Wan Communications Work

Using Network Communication Protocols

Connecting Through a Cabled Network

Devices for Connecting Networks

Connecting Through a Wireless Network

Sharing Resources on a Network

Using a Server

Understanding Wan Connection Choices

Securing Your Network

Maintaining and Troubleshooting Your Network

Filters