Question 1

Frequent and consistent oversight of digital equipment is necessary to avoid:

Accepted Answer

A)  increased cost. 
B)  unnecessary patient exposure. 
C)  quality images. 
D)  QC. 
A)  increased cost. 
B)  unnecessary patient exposure. 
C)  quality images. 
D)  QC.

Question 2

If cassette labels are worn or damaged, the connection of the imaging plate to the patient and exam will not be affected.

Accepted Answer

A) True 
 B)False

Question 3

Reestablishing baseline values is the responsibility of the:

Accepted Answer

A)  radiation physicist. 
B)  radiologist. 
C)  technologist. 
D)  service personnel. 
A)  radiation physicist. 
B)  radiologist. 
C)  technologist. 
D)  service personnel.

Question 4

Preventive maintenance is performed:

Accepted Answer

A)  daily. 
B)  weekly. 
C)  monthly. 
D)  semiannually. 
A)  daily. 
B)  weekly. 
C)  monthly. 
D)  semiannually.

Question 5

On a weekly basis, a designated QC technologist may perform all of the following tests except:

Accepted Answer

A)  image acquisition testing with phantoms. 
B)  cassette integrity with special standardized cassettes. 
C)  recording and reporting all problems immediately. 
D)  cleaning air intakes on the image plate reader. 
A)  image acquisition testing with phantoms. 
B)  cassette integrity with special standardized cassettes. 
C)  recording and reporting all problems immediately. 
D)  cleaning air intakes on the image plate reader.

Question 6

Imaging plates may be disposed of by:

Accepted Answer

A)  placing in a trash receptacle. 
B)  sending to the environmental protection agency (EP
A) . 
C)  a licensed disposal company. 
D)  storing in barium sulfate. 
A)  placing in a trash receptacle. 
B)  sending to the environmental protection agency (EP
A) . 
C)  a licensed disposal company. 
D)  storing in barium sulfate.

Question 7

Which one of the following is used to cool the reader?

Accepted Answer

A)  Air 
B)  Water 
C)  Oil 
D)  Laser 
A)  Air 
B)  Water 
C)  Oil 
D)  Laser

Question 8

The purpose of a personal repeat rate log is to:

Accepted Answer

A)  provide analysis of repeat cost. 
B)  prevent repeats. 
C)  establish error trends. 
D)  prove poor technologist performance. 
A)  provide analysis of repeat cost. 
B)  prevent repeats. 
C)  establish error trends. 
D)  prove poor technologist performance.

Question 9

Image orientation can be difficult because of a lack of ______ the cassette.

Accepted Answer

A)  markers indicating the tube side of 
B)  identification blocker on 
C)  both a and b 
D)  neither a nor b 
A)  markers indicating the tube side of 
B)  identification blocker on 
C)  both a and b 
D)  neither a nor b

Question 10

The safest procedure for erasing cassettes is to erase them:

Accepted Answer

A)  after 24 hours. 
B)  just before use. 
C)  twice a day. 
D)  twice a week. 
A)  after 24 hours. 
B)  just before use. 
C)  twice a day. 
D)  twice a week.

Frequent and consistent oversight of digital equipment is necessary to avoid:

If cassette labels are worn or damaged, the connection of the imaging plate to the patient and exam will not be affected.

Reestablishing baseline values is the responsibility of the:

Preventive maintenance is performed:

On a weekly basis, a designated QC technologist may perform all of the following tests except:

Imaging plates may be disposed of by:

Which one of the following is used to cool the reader?

The purpose of a personal repeat rate log is to:

Image orientation can be difficult because of a lack of ______ the cassette.

The safest procedure for erasing cassettes is to erase them:

Introduction to Digital Radiography and Pacs

Digital Image Characteristics

Digital Radiographic Image Processing and Manipulation

Photostimulable Phosphor Image Capture

Tft Flat Panel Array Image Acquisition

Ccdcmos Image Capture

Basic Computer Principles

Networking and Communications Basics

Pacs Fundamentals

Pacs Archiving and Peripherals

Ensuring Quality in Pacs

Filters

Exam 12: Quality Acceptance Testing Within Digital Projection Imaging

Frequent and consistent oversight of digital equipment is necessary to avoid:

If cassette labels are worn or damaged, the connection of the imaging plate to the patient and exam will not be affected.

Reestablishing baseline values is the responsibility of the:

Preventive maintenance is performed:

On a weekly basis, a designated QC technologist may perform all of the following tests except:

Imaging plates may be disposed of by:

Which one of the following is used to cool the reader?

The purpose of a personal repeat rate log is to:

Image orientation can be difficult because of a lack of ______ the cassette.

The safest procedure for erasing cassettes is to erase them:

Introduction to Digital Radiography and Pacs

Digital Image Characteristics

Digital Radiographic Image Processing and Manipulation

Photostimulable Phosphor Image Capture

Tft Flat Panel Array Image Acquisition

Ccdcmos Image Capture

Basic Computer Principles

Networking and Communications Basics

Pacs Fundamentals

Pacs Archiving and Peripherals

Ensuring Quality in Pacs

Filters