Question 1

What is a consideration when conducting an outdoor site survey?

Accepted Answer

A)  climate conditions 
B)  foliage 
C)  permits and zoning 
D)  All of the above 
A)  climate conditions 
B)  foliage 
C)  permits and zoning 
D)  All of the above D

Question 2

Which of the following is NOT a part of defining the physical and security requirements of a site?

Accepted Answer

A)  the type of encryption that will be used 
B)  which applications run on the network 
C)  the type of authentication needed 
D)  whether the APs be secured and connected to the wired network 
A)  the type of encryption that will be used 
B)  which applications run on the network 
C)  the type of authentication needed 
D)  whether the APs be secured and connected to the wired network B

Question 3

Which is NOT a part of gathering data for a site survey?

Accepted Answer

A)  examining business requirements 
B)  defining physical and security requirements 
C)  determining manufacturer of existing wireless NICs 
D)  gathering site-specific documentation 
A)  examining business requirements 
B)  defining physical and security requirements 
C)  determining manufacturer of existing wireless NICs 
D)  gathering site-specific documentation C

Question 4

The ____ setting of a site survey analyzer specifies the AP that will be involved in the test.

Accepted Answer

A)  Destination MAC Address 
B)  Continuous Link Test 
C)  Packet Tx Type 
D)  Delay Between Packets 
A)  Destination MAC Address 
B)  Continuous Link Test 
C)  Packet Tx Type 
D)  Delay Between Packets

Question 5

Match between columns
                        Premises: a list of itemized software and/or hardware components that are needed for a new WLAN
a dynamic self-managing WLAN
hardware or software that captures packets to decode and analyze their contents
an in-depth examination and analysis of a WLAN site
A site survey that requires walking through the area of the WLAN while carrying a wireless client like a laptop or tablet computer
a device that scans the RF spectrum to can locate potential sources of interference
a site survey that is a virtual survey of the area that uses modeling techniques to design the wireless network
the measure of delay between packets
the amount of acceptable time that a late packet can arrive and still be used
the implementation of Voice over IP (VoIP)telephony on a WLAN

Accepted Answer

The Answer of VoWiFi and site survey and bill of is...

Question 6

Which of the following are common spectrum analyzer measurements? (Choose all that apply.)

Accepted Answer

A)  current 
B)  modulation 
C)  attenuation 
D)  distortion 
A)  current 
B)  modulation 
C)  attenuation 
D)  distortion

Question 7

Which site survey analyzer parameter allows a user to establish a baseline for satisfactory performance?

Accepted Answer

A)  delay between packets 
B)  percent success threshold 
C)  percent complete 
D)  continuous link test 
A)  delay between packets 
B)  percent success threshold 
C)  percent complete 
D)  continuous link test

Question 8

Describe three types of data needed for an outdoor site survey.

Accepted Answer

Height and material of the buildings, li

Question 9

What are the steps involved in gathering data for a site survey?

Accepted Answer

Gathering data for a site survey involve

Question 10

A protocol analyzer can be hardware or software and can fully decode Application-layer protocols.

Accepted Answer

A) True 
 B)False

Question 11

Which of the following is NOT a goal in conducting a site survey?

Accepted Answer

A)  determine the best location for APs 
B)  locate unauthorized APs 
C)  make the network secure 
D)  determine the cost of the APs 
A)  determine the best location for APs 
B)  locate unauthorized APs 
C)  make the network secure 
D)  determine the cost of the APs

Question 12

Which of the following are categories of site survey? (Choose all that apply.)

Accepted Answer

A)  baseline 
B)  postdeployment 
C)  periodic 
D)  troubleshooting 
A)  baseline 
B)  postdeployment 
C)  periodic 
D)  troubleshooting

Question 13

A Waterfall View on a spectrum analyzer shows the aggregate energy collected since the start of a session.

Accepted Answer

A) True 
 B)False

Question 14

Name and describe three times at which a site survey should be conducted.

Accepted Answer

Before installing a new wireless network

Question 15

Areas that wireless signals do not reach,such as into corners of a house or onto an outdoor deck are called ____________________.

Accepted Answer

The answer of Areas that wireless signals do not reach,such...

Question 16

Walls,floors,and people can impact the RF signal.

Accepted Answer

A) True 
 B)False

Question 17

Describe a predictive site survey.

Accepted Answer

Instead of requiring a human surveyor to

Question 18

Which is true about spectrum analyzers?

Accepted Answer

A)  they alter the signal in order to resolve problems 
B)  they are passive receivers 
C)  they are active transmitters 
D)  they generate signal noise to see how it affects the RF transmission 
A)  they alter the signal in order to resolve problems 
B)  they are passive receivers 
C)  they are active transmitters 
D)  they generate signal noise to see how it affects the RF transmission

Question 19

When is the first step in the access point configuration and location part of the site survey?

Accepted Answer

A)  decide which type of AP to use 
B)  configure the AP for optimum power output 
C)  place the AP in a temporary location 
D)  determine antenna type 
A)  decide which type of AP to use 
B)  configure the AP for optimum power output 
C)  place the AP in a temporary location 
D)  determine antenna type

Question 20

What provides the greatest source of RF interference?

Accepted Answer

A)  mirror 
B)  interior wall 
C)  water 
D)  security window 
A)  mirror 
B)  interior wall 
C)  water 
D)  security window

What is a consideration when conducting an outdoor site survey?

Which of the following is NOT a part of defining the physical and security requirements of a site?

Which is NOT a part of gathering data for a site survey?

The ____ setting of a site survey analyzer specifies the AP that will be involved in the test.

Which of the following are common spectrum analyzer measurements? (Choose all that apply.)

Which site survey analyzer parameter allows a user to establish a baseline for satisfactory performance?

Describe three types of data needed for an outdoor site survey.

What are the steps involved in gathering data for a site survey?

A protocol analyzer can be hardware or software and can fully decode Application-layer protocols.

Which of the following is NOT a goal in conducting a site survey?

Which of the following are categories of site survey? (Choose all that apply.)

A Waterfall View on a spectrum analyzer shows the aggregate energy collected since the start of a session.

Name and describe three times at which a site survey should be conducted.

Areas that wireless signals do not reach,such as into corners of a house or onto an outdoor deck are called ____________________.

Walls,floors,and people can impact the RF signal.

Describe a predictive site survey.

Which is true about spectrum analyzers?

When is the first step in the access point configuration and location part of the site survey?

What provides the greatest source of RF interference?

The World of Wireless

Wireless Local Area Networks

Radio Frequency Fundamentals

Antennas

Physical Layer Standards

Medium Access Control Layer Standards

WLAN Management and Architectures

Wireless LAN Security Vulnerabilities

Implementing Wireless LAN Security

Managing a Wireless LAN

Wireless Network Troubleshooting and Optimization

Other Wireless Networks

Filters

Exam 8: Conducting a Site Survey

What is a consideration when conducting an outdoor site survey?

Which of the following is NOT a part of defining the physical and security requirements of a site?

Which is NOT a part of gathering data for a site survey?

The ____ setting of a site survey analyzer specifies the AP that will be involved in the test.

Which of the following are common spectrum analyzer measurements? (Choose all that apply.)

Which site survey analyzer parameter allows a user to establish a baseline for satisfactory performance?

Describe three types of data needed for an outdoor site survey.

What are the steps involved in gathering data for a site survey?

A protocol analyzer can be hardware or software and can fully decode Application-layer protocols.

Which of the following is NOT a goal in conducting a site survey?

Which of the following are categories of site survey? (Choose all that apply.)

A Waterfall View on a spectrum analyzer shows the aggregate energy collected since the start of a session.

Name and describe three times at which a site survey should be conducted.

Areas that wireless signals do not reach,such as into corners of a house or onto an outdoor deck are called ____________________.

Walls,floors,and people can impact the RF signal.

Describe a predictive site survey.

Which is true about spectrum analyzers?

When is the first step in the access point configuration and location part of the site survey?

What provides the greatest source of RF interference?

The World of Wireless

Wireless Local Area Networks

Radio Frequency Fundamentals

Antennas

Physical Layer Standards

Medium Access Control Layer Standards

WLAN Management and Architectures

Wireless LAN Security Vulnerabilities

Implementing Wireless LAN Security

Managing a Wireless LAN

Wireless Network Troubleshooting and Optimization

Other Wireless Networks

Filters