Deck 3: Configuring HPE GreenLake Solutions

Question 1

An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution. What is a valid reason to select 10GbE?

A) The customer's network infrastructure is based on QoS service.
B) The customer needs the system to recover quickly from a failure.
C) The customer needs the object storage servers to be able to locate random data on a disk more quickly.
D) The customer plans to increase the memory in the nodes in the future.

Answer 1

The customer needs the object storage servers to be able to locate random data on a disk more quickly.

Question 2

An architect takes the following notes during a meeting with a customer: plans to introduce an entirely new service offering to customers servers will be virtualized and will consume large amounts of storage space project is to operate in an isolated section of the data center with limited access to the corporate network need flexibility to grow quickly as required by the new service demands on the infrastructure has no repeatable process for firmware management concerned about how long it will take for the project team to become productive on the new infrastructure Which solution should the architect propose to help the customer overcome all of its project challenges?

A) HPE BladeSystem solution with HPE 3PAR storage
B) HPE Apollo 6000 solution with HPE 3PAR storage
C) HPE ConvergedSystem 700 solution with HPE 3PAR storage
D) HPE Apollo 2000 solution with HPE 3PAR storage

Answer 2

HPE Apollo 6000 solution with HPE 3PAR storage

Question 3

A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs. Which HPE Server solution will help meet the customer's needs?

A) HPE Apollo 6000 System
B) HPE Superdome X
C) HPE BladeSystem c7000 with BL460G Gen9 Servers
D) HPE Apollo 4500 System

Answer 3

HPE Superdome X

Question 4

An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console. What should the architect explain to the customer?

A) IT staff can open a Remote Console to any cartridges linked to an mRCA through the iLO CM.
B) Remote Console access is only supported when a cartridge is part of an HPE Helion CloudSystem 9.x solution.
C) Remote console access is not supported for cartridges; IT staff should use local consoles instead.
D) IT staff can open a Remote Console to any cartridge through the iLO CM.

Question 5

An architect finds several vulnerabilities with a customer's digital enterprise that could lead to data loss on a third-party storage system for critical business segments. Which solution should the architect propose to help the customer to protect their digital enterprise?

A) an HPE StoreOnce solution configured to take backups of the critical data from the third-party storage
B) an HPE StoreAll solution configured to migrate the critical data to object-based storage
C) an HPE StoreVirtual solution configured as a secondary node to replicate the critical data on the third-party storage
D) an HPE 3PAR StoreServ solution configured to peer persistence with the third-party storage to protect the critical data

Question 6

An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE Moonshot 45XGc Switch, and an HPE 4-QSFP+Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link. How should the architect change the proposal?

A) Add another FlexibleLOM adapter for each cartridge.
B) Change the HPE Moonshot 45XGc Switch to an HPE Moonshot 180G switch.
C) Add another HPE Moonshot 45XGc Switch and 4-QSFP+Uplink Module.
D) Change the 4-QSFP+Uplink Module to a 16-SFP+ Uplink Module.

Question 7

An architect is designing an HPE Apollo 6000 solution to support a customer application. The architect is choosing between the HPE ProLiant XL230a and the XL250a compute tray. What is one reason for choosing the XL250a tray?

A) The application is single-threaded.
B) The application requires high storage capacity.
C) The application uses high amounts of memory.
D) The application requires GPU acceleration.

Question 8

A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes. Which HPE Apollo system is most appropriate for this situation?

A) HPE Apollo r2200
B) HPE Apollo r2800
C) HPE Apollo 6000
D) HPE Apollo 8000

Question 9

An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure. What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?

A) Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
B) Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
C) Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.
D) Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports. Stack the modules in different chassis and connect just one to the management network.

Question 10

A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies. Which solution should the architect recommend to help solve these issues?

A) HPE Advanced Power Manager
B) HPE OneView 2.x
C) HPE Power Advisor
D) HPE Insight Remote Support

Question 11

A customer needs a hosted physical desktop solution. Users will run typical o?ice applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users. Which HPE Moonshot cartridge should the architect recommend?

A) HPE m710
B) HPE m400
C) HPE m700
D) HPE m710p

Question 12

What is a basic assumption for an architect using the HPE Servers TCO calculator to justify a customer's migration away from a fully depreciated set of hardware?

A) By analyzing the project's internal rate of return (IRR), it is possible to determine if the lower IRR will make it more desirable to undertake the project.
B) When the customer's older systems are under a support contract, a new system can sometimes pay for itself simply by not renewing the older support contracts.
C) The Net Present Value (NPV) is the difference between the value of the older systems and the cost of the new systems.
D) The opportunity costs of not migrating from a legacy environment to an HPE Converged Infrastructure Solution, in terms of IT Efficiency and User Productivity, will always justify the purchase.

Question 13

A customer needs a live transcoding solution that meets the following requirements: Supports thousands of HD streams Provides GPU acceleration Provides a high density of streams per Watt and rack unit Which solution should the architect recommend?

A) Several HPE Apollo 6000 Systems with HPE ProLiant XL220a server nodes
B) Several HPE Moonshot Systems with m700 cartridges
C) Several HPE Moonshot Systems with m710p cartridges
D) Several HPE Apollo 6000 Systems with HPE ProLiant XL230a server nodes

Question 14

A customer's Gen9 web server resides behind a firewall. What is the most secure and efficient method to monitor this server?

A) Use Intelligent Provisioning.
B) Use Agentless Management.
C) Create Firewall rules and install System Management Homepage in Protected Mode.
D) Create Firewall rules and install WBEM.

Question 15

A customer requests a proposal for an HPE Apollo 4530 system.  The customer reports that it has experienced problems in the past with boot time malware attacks within its environment. Which solution should the architect propose to protect the customer from this threat?

A) Use encrypted drives.
B) Use Smart Array Controllers.
C) Enable Legacy BIOS mode.
D) Enable UEFI secure boot mode.

Question 16

An architect is designing a data center solution that contains an HPE BladeSystem for the virtual application, infrastructure, and VDI environment. It also contains an HPE Moonshot for the web servers. In which parts of the HPE Transformation Area does this solution fit?

A) empower and protect
B) transform and empower
C) enable and empower
D) transform and protect

Question 17

A customer needs a server infrastructure update for its Hadoop HBase solution. The HBase maximum dataset size will be 120TB. To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges. The populated chassis provide the following in total: 135 processors with 4 2.9GHz cares each 4. 32TB RAM 64.8TB local storage on SSDs Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one-tenth or even one-hundredth of its potential?

A) number of cores per processor
B) number of processors
C) amount of local storage on SSDs
D) amount of RAM

Question 18

A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel. The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray. What is one reason for choosing the XL250a tray?

A) The HPE XL250a server supports DDR4 HPE Smart Memory.
B) The HPE XL250a server supports dual accelerators.
C) The HPE XL250a server provides full length PCIe expansion slots.
D) The HPE XL250a server delivers dual processor performance.

Question 19

A customer plans to purchase some c7000 blade enclosures equipped with Virtual Connect FlexFabric modules to support its development and test team. The customer is concerned about frequent changes to the server blade connectivity. In the initial proposal, an architect included HPE OneView, and now the customer wants to learn how HPE OneView will address their concern. Which HPE OneView functionality should the architect explain to the customer?

A) all external connectivity changes will be automatically discovered and server profiles will be automatically updated to reflect the change.
B) the customer can use different plugins to visualize network and storage connectivity, and change them by using the drag and drop method.
C) the customer can create profile templates, deploy server profiles from the template, and, if necessary, use the same method to update server connectivity.
D) the customer can access HPE Virtual Connect Enterprise Manager and perform connectivity changes for all servers in the same Virtual Connect Domain Group.

Question 20

A customer needs an HPE Apollo 6000 solution and Remote Direct Memory Access (RDMA). Which network interconnects should the architect recommend for this solution? (Choose two.)

A) 1 GbEthernet
B) Infiniband
C) FlexFabric
D) 16 Gb Fibre Channel
E) 12G SAS

Question 21

An architect is designing a solution, a key element of which is the capability for fast VMware cluster growth with minimal administrative interaction. Which HPE solution should the architect recommend?

A) HPE MSA 2040 in combination with VMware auto deploy
B) HPE StoreVirtual VSA combination with HPE Virtual Connect
C) HPE 3PAR in combination with HPE OneView for VMware vCenter
D) HPE 3PAR in combination with HPE Storage Automation

Question 22

A customer has an Ethernet-based storage solution. The customer needs to upgrade its servers to prepare for expanding storage. The customer has spent a lot of money to update its Ethernet infrastructure, so does not want to change it. The customer has DAS and NAS-based storage and plans to implement a Fibre Channel SAN-based storage array within the next six to eight months. Which server-based solution meets the customer's future needs?

A) HPE Apollo 8000 solutions
B) HPE DL360 solution with fibre-based HBAs
C) HPE BL460c solution with Converged Networks Adapters
D) HPE Moonshot solutions

Question 23

An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS. Each HPE ProLiant XL450 in the solution uses the following baseline recommendations: - 15 8TB HDDs (120TB total) - 2 10-core 2.3GHz processors - 128GB memory (64GB on each processor) - 2-port 10GbE FlexibleLOM The architect has planned enough servers to meet the customer's requirements for total capacity. Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?

A) processor and memory
B) adapter bandwidth and processors
C) drive capacity and memory
D) drive type (HDD versus SSD) and drive capacity

Question 24

An architect reviews an HPE Apollo 6000 design and finds that there are plans for redundant iLO connections on each HPE Apollo 6000 chassis to a pair of top-of-rack switches. These switches are set up as individual switches connected to a single core. Which configuration change should the architect recommend to ensure a loop free management topology?

A) Remove one iLO connection from each HPE Apollo 6000 chassis.
B) Configure MAD between the top-of-rack switches.
C) Replace the top-of-rack switches with HPE Advanced Power Management Kits.
D) Configure IRF between the top-of-rack switches.

Question 25

A customer is working on a project to enable workplace productivity. The customer needs a solution that will allow employees to connect to their workplace environment by using a personal mobile phone, tablet, laptop, or desktop computer. Employees must be able to stop and resume work seamlessly while travelling between offices. Which purpose-built hardware can the customer use to help achieve this goal?

A) HPE Moonshot to provide hosted physical desktop and application virtualization t mobile users
B) HPE Apollo 2000 to provide VDI access to mobile users
C) HPE Moonshot to provide VDI access to mobile users
D) HPE Apollo 2000 to provide hosted physical desktop and application virtualization to mobile users

Question 26

An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows: - one chassis with 30 m710 cartridges - two chassis with 30 m800 cartridges each The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows: - one chassis with 30 m710 cartridges and 15 m800 cartridges - one chassis with 45 m800 cartridges What should the architect explain to the customer?

A) Mixing different models of cartridges in the same chassis is not supported
B) A chassis can support both m710 and m800 cartridges, but the m710 cartridges will not be able to use their accelerators
C) Mixing different models of cartridges requires the customer to use an HPE Moonshot Provisioning Manager (MPM)
D) A chassis can support both m710 and m800 cartridges, but the m710 cartridge adapters will operate at 1Gbps rather than 10Gbps

Question 27

A customer needs to order an HPE Apollo 2000 chassis and compute trays. The customer's requirements are as follows: - Four nodes - SATA SSD storage of 23TB - HPE Secure Encryption on the storage Which compute tray should the architect recommend?

A) XL190r
B) XL220a
C) XL230a
D) XL170r

Question 28

A cost-conscious customer needs a server upgrade to host a Citrix application virtualization solution. The solution must meet the following requirements: - Support 1,200 simultaneous users - Scale out easily to accommodate 20 percent future growth - Provide optimum performance for applications such as Microsoft Office Suite, Skype for Business, and Adobe Photoshop Which solution should the architect recommend?

A) an HPE Moonshot System with m350 cartridges
B) an HPE Integrity Superdome X System with BL920s Gen8 blades
C) an HPE Moonshot Systems with m710 cartridges
D) an HPE Integrity Superdome X System with BL920s Gen9 blades

Question 29

A software development customer's data center has servers from three different vendors. The customer plans to purchase 15 HPE c7000 enclosures that are populated with BL460c Gen9 blades. Each enclosure will be deployed with HPE OneView advanced licensing. The customer uses third-party SNMP-based management tools as well as some custom dashboards that were written to monitor the statue of the datacenter. The infrastructure management team is concerned about how to integrate HPE OneView into its management strategy. What should the architect demonstrate?

A) how to access HPE OneView data and incorporate it into the internally developed dashboards using the REST API
B) how to use HPE OneView as the dashboard for the existing monitoring tools using the REST API
C) how to point the existing servers to the new HPE OneView instance for all SNMP traps
D) how to access HPE OneView data and incorporate it into the internally developed dashboards using the iLO RIBCL command language

Question 30

A customer has HPE BladeSystem BL460c Gen9 blades with two processors and 512GB of memory. The blades are running a MS-SQL database on a clustered 2TB SAS virtual volume that is exported from an HPE 3PAR StoreServ 8200. The customer reports that the MS-SQL database is performing poorly. After extensive performance trending analysis, it is determined that the database front-end I/O requirements are unpredictable and often exceed 100,000 IOPs with latency in excess 30ms at critical times. Which solution should the architect recommend to resolve the performance issue with consideration to cost and complexity?

A) Increase the memory on the blades to 2TB.
B) Install SSD drives local to the BL460c.
C) Install an HPE IO Accelerator on the blade.
D) Add Adaptive Optimization licensing.

Question 31

An architect proposes an HPE Moonshot solution to a customer. The customer informs the architect that the data center switches can only provide four 40GbE ports per rack. How should the architect modify the proposed solution so that each rack meets the requirement?

A) Replace the 45XGc modules with the 180G module to aggregate uplink ports on multiple chassis into a single port
B) Use the iLO Chassis Management (CM) module port to support both iLO and production traffic on four of the HPE Moonshot chassis
C) Create two Intelligent Resilient Framework (IRF) fabrics, each with four switch modules, and let the switches in each fabric share uplinks
D) Use the iLO Chassis Management (CM) module port to daisy chain the chassis together and let the chassis in the daisy chain share uplinks

Question 32

An architect needs to demonstrate the financial advantages of a proposed HPE server and Hypervisor-based solution compared to a legacy server environment that has traditional servers and desktops. Which tool should the architect use?

A) Hyperscale Business Value Calculator
B) Client Virtualization ROI Calculator
C) HPE Business Technology Optimization
D) HPE Business Process Monitor

Question 33

A customer is planning to migrate from a Virtual Connect Enterprise Manager (VCEM) environment to HPE OneView. Which topic should the architect discuss with the customer before the migration is implemented?

A) that HPE OneView Advanced licenses should be added to the appliance prior to the migration
B) that direct migration from the VCEM is not possible and the customer should plan to remove VC Domain from VCEM first
C) that migration to the HPE OneView will replace existing WWNs and MAC addresses with new ones, assigned by HPE OneView
D) that additional one-time-use licenses are required for migration

Question 34

HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink ModulesA customer is planning to replace its DAS-based third-party server solution with an HPE BladeSystem solution using FlexFabric connected to an iSCSI based HPE StoreVirtual 3200. Which method should the architect recommend for migrating data from the old system to the new system?

A) Use Peer Motion with a temporary 180-day license
B) Use Business Copy software licensed to the current total size of all DAS storage
C) Use Virtual Copy software
D) Use a LAN-based file transfer method

Question 35

Under which Transformation Area do HPE Moonshot solutions with Citrix fail?

A) Protect your digital enterprise.
B) Empower a data-driven organization.
C) Enable workplace productivity.
D) Transform to a hybrid infrastructure

Question 36

An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the image. The customer is concerned about cost and is not interested in managing or monitoring performance of the solution, Which solution meets these requirements?

A) HPE Insight Cluster Management Utility (CMU)
B) HPE Intelligent Provisioning (IP)
C) HPE OneView 2.0
D) HPE Insight Control server provisioning (ICsp)

Question 37

An architect proposes an HPE Moonshot server solution for a customer. The customer needs a single processor solution with a network switch to allow 10Gb connectivity and support for a software-defined network solution. Which HPE Moonshot switch module meets the customer's needs?

A) 180G Switch Module
B) 45Gc Switch Module
C) 45XGc Switch Module
D) 45G Switch Module

Question 38

A customer's business critical application server, which is managed by HPE OneView, recovered from an automatic ASR reboot. HPE Support requests an Active Health System log. What should the customer use to access the log while the server is online?

A) iLO
B) HPE OneView
C) Intelligent Provisioning
D) UEFI Bios

Question 39

A customer needs a server quote for a DL Gen9 server. The requirements are as follows: - Gen9 technology with internal storage to support 12 drives - Exchange database capacity of at least 1.2TB - 512GB of LRDIMM memory - 10Gbe Ethernet support The architect is proposing the DL380 Gen9 server to meet this customer's current needs and some near future expansion. Which component should the architect add to the quote to meet the customer's requirements?

A) HPE 12Gb SAS Expander Card
B) HPE SAS HBA Controller H244br
C) HPE PCIe Workload Accelerators
D) HPE Smart Storage Battery

Question 40

When designing a Superdome X configuration for a customer, which storage configuration should the architect choose?

A) one mezzanine FC port on one nPar dedicated for booting from an MSA 2040 and an additional FC port for user data
B) booting from a local direct attached SSD disk and a mezzanine FC port for user data storage on an MSA 2040
C) a single mezzanine FC port in each nPar for common access to all volumes on an HPE 3PAR StoreServ
D) booting from a local direct attached SSD disk and a mezzanine TOE N/W port for user data accessing an MSA 2040 using iSCSI

Question 41

An architect is planning an HPE Moonshot System to host a customer Hadoop MapReduce2 application. The architect originally proposed the following: m710 cartridges HPE 45XGc switches HPE 4-QSFP+ Uplink Modules The customer now needs each HPE Moonshot chassis to provide at least 1TB of memory and 40TB or local storage. Cartridge nodes needs two 10GbE ports each. What does the architect need to replace in the solution to meet the customer's new requirements?

A) m710 cartridges with m350 Cartridge, which provide more memory
B) m710 cartridges with m710p cartridges, which support higher capacity local drives
C) 45XGc switches with 180G switches, which provide the required two 10GbE ports to the cartridges
D) 4-QSFP+ Uplink Modules with 16-SFP+ Uplink Modules, which provide 10GbE ports to the cartridges

Question 42

A customer purchases a hyperscale solution based on the HPE Moonshot platform and needs a management tool is suitable for this environment and meets the customer's needs?

A) HPE Cloud OS for HPE Moonshot
B) HPE Helion Cloud System 9 Foundation
C) HPE OneView with HPE Operation Analytics plugin
D) HPE Insight Cluster Management Utility

Question 43

A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations. Which statement most accurately describes different platform support in HPE OneView?

A) WBEM Providers will be used for any server managed by HPE OneView.
B) All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.
C) HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.
D) The customer can select from different management protocols between SNMP V2 and SNMP VS to match the security requirements.

Question 44

A customer is using HPE OneView to monitor multiple HPE BladeSystems running ESXi and plans to use HPE OneView to manage the enclosure and blades. Additionally, the customer plans to use HPE OneView for VMware Operations Manager to receive critical trend changes. Which licenses should the architect include in the proposal?

A) VMware Enterprise licenses and iLO Advanced licenses
B) HPE OneView Standard licenses and VMware Enterprise plus licenses
C) HPE OneView Advanced licenses and VMware Enterprise plus licenses
D) HPE Insight Control licenses and VMware Enterprise plus licenses

Question 45

An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records. Which value does the architect need to consider?

A) total cost of acquisition (TCA)
B) net investment value (NIV)
C) net book value (NBV)
D) fair market value (FMV)

Question 46

An architect needs to design a solution for a customer that stores all data on third-party NAS storage, and that does not yet have a database solution. The new HPE-based solution must be optimized for data mining. How can the current data stored on the NAS be used for data mining?

A) connecting the database to the NAS as main storage by using a TOE Host Bus Adapter
B) using the database application import functionality to migrate the data from the NAS to block-level storage for processing
C) attaching the database directly to the NAS storage by using a Fibre Channel Host Bus Adapter and by using the NAS for all DB tables
D) attaching the database directly to the NAS storage by using an iSCSI Host Bus Adapter and by using the NAS for all DB tables

Question 47

An architect has selected the FlexibleLOM option fur HPE XL230a compute trays, which will host an HPC application. When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?

A) when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes
B) when the application requires high throughput between processors and disk drives local to the same compute tray
C) when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution
D) when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links

Question 48

An architect plans to propose a solution and illustrate how it will reduce the predictable and repeatable costs for items and services not registered as assets. Which reporting period information helps the architect achieve this goal?

A) total cost of acquisition (TCA)
B) internal rate of return (IRR)
C) gross profit (GP)
D) operating expenditure (OPEX)

Question 49

Which factors must the architect consider to help define an appropriate HPE server solution to meet a customer's needs?

A) the legacy hardware and software solutions that the customer is currently running, whether the customer is standardized on x86 architectures, and which storage and networking protocols the customer is using
B) the number of users for the application, the IT resources required by the application, which applications can be consolidated, and whether there are any Service Level Agreement (SLA) requirements
C) whether the customer is considering solutions for the New Style of IT, for Security, for Big Data, or for Mobility
D) the installed base of ProLiant, 3PAR, and ProCurve products, and whether any Cloudline opportunities exist at the customer site

Question 50

An architect is planning an HPE Integrity Superdome X solution with the following nPartitions: nPar 1= Slots 1, 3, and 5 nPar 2 = Slots 2, 4, and 6 The Superdome X solution must connect to a Fibre Channel SAN solution, which provides boot disks for the Superdome X solution. The architect has selected a FlexibleLOM adapter for each blade. What is a valid plan for additional adapters?

A) one 2-port FC HBA for slot 1
B) one 2-port FC HBA each for slot 1, slot 3, and slot 5
C) one 2-port FC HBA each for slot 1 and slot 2
D) one 2-port FC HBA each for slot 2, slot 4, and slot 6

Question 51

A customer has an HPE c7000 chassis with the following components installed: - Cisco Fabric Extender - Fibre channel pass-through modules - BL460c Gen9 blades with LPe1605 The architect needs to allow network bandwidth control for some of the customer's critical servers and server-to-server communication for vMotion. Which modification should the architect recommend?

A) Replace the Fibre Channel pass-through modules with HPE Virtual Connect 16Gb modules
B) Replace the Cisco Fabric Extender with HPE FlexFabrix 20/40 F8 modules
C) Change the QoS setting on the Fibre Channel pass-through modules
D) Change the setting within the Onboard Administrator to enable QoS

Question 52

A customer plans a partial migration from VMware to Red Hat Enterprise Virtualization (RHEV). The customer plans to purchase a new server platform for RHEV implementation with Gen9 server blades and Virtual Connect FlexFabric modules. Which additional product should the architect include in the proposal?

A) HPE Cluster Management Utility (CMU). because BIOS/UEFI settings for a server running RHEV can only be managed by using CMU
B) HPE Smart Update Manager licenses, because that is the only method that customers can use centralized firmware updates and driver management
C) HPE Cloud System 9 Foundation, because this will allow the customer to burst to the public cloud and will enable deployment of the services based on the physical machine
D) HPE OneView Advanced, because together with the HPE OneView licenses, the customer will gain right-to-use for HPE OneView for RHEV

Question 53

Which of the HPE Transformation Areas should the architect discuss when the customer's concerns span backup and recovery, high availability, and disaster recovery?

A) Transform to a hybrid infrastructure.
B) Empower the data-driven organization.
C) Protect the digital enterprise.
D) Enable workplace productivity.

Question 54

A customer needs to streamline monitoring to its HPE Apollo 6000 solution. Which benefit can HPE Advanced Power Management (APM) provide to this customer?

A) It discovers and inventories XL servers installed in the HPE Apollo chassis.
B) It monitors the utilization of resources such as CPU and memory.
C) It enables HPE OneView to automatically discover and map the chassis and its servers.
D) It audits the firmware on XL servers installed in the HPE Apollo chassis.

Question 55

An architect needs to scope the number of required m710p cartridges for video transcoding. The architect plans to aim for an additional 20 to 25 percent growth capacity. In addition to this growth capacity, which factors will determine the number of required cartridges? (Choose two.)

A) the amount of memory required
B) the number of video streams required
C) the number of formats to which to convert
D) the number and type of processors
E) the amount of storage capacity required

Question 56

An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support 40GbE. Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?

A) HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules
B) HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules
C) HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules
D) HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules

Question 57

An architect is positioning a scale-up solution to a customer. The solution will reduce the customer's server sprawl by reducing 100 legacy virtualization hosts while improving performance. Which HPE platform provides an appropriate solution?

A) HPE Integrity Superdome X
B) HPE Apollo Systems
C) HPE Synergy
D) HPE Hyper-converged systems

Question 58

An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each management module to the management network. The customer then informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure. What should the architect do to meet the customer's needs, while still allowing iLO access to the HPE Apollo Systems?

A) Have iLO traffic share the same ports as production traffic and inform the data center administrators that they should use VLANs to separate the two types of traffic.
B) Ensure that HPE Advanced Power Manager aggregates iLO acccess, as well as provides other rack and power management benefits.
C) Enable the iLO REST API on each HPE ProLiant XL server.
D) Add one Innovation Zone module on each chassis to connect to HPE Insight Cluster Management Utility (CMU).

Question 59

An architect is determining the amount of memory to propose for an HPE XL230a compute tray. The customer specifies several requirements, properties, and parameter of the application. Which factor will critically affect the memory amount requirement to prevent a potential memory bottleneck?

A) The application stores data on local drives.
B) The application requires CPUs with multiple cores to support multiple HPC jobs.
C) The application is single-threaded high performance computing (HPC).
D) Secure Encryption of locally stored data is required.

Question 60

A customer has an HPE Integrity Superdome X system with an nPartition that has been provisioned with a supported OS and application. What first detects data corruption caused by an installed DIMM module?

A) the XNC2 controller in the internal fabric
B) the application using the data
C) the OS installed on the nPartition
D) the Superdome X firmware

Question 61

View the Exhibit. Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions. The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?

A) CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
B) None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
C) The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
D) The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.

Question 62

A customer plans to develop scripts that use the REST API for HPE OneView. However, the customer is concerned about the complexity of the scripts. Which tool can be used to adopt the HPE OneView REST API quicker?

A) HPE SmartStart Scripting Toolkit
B) HPE Operations Analytics for HPE OneView
C) HPE Python library for HPE OneView
D) HPE iLO4 using RedFish

Question 63

A customer operates a data center based on third-party servers, which includes third-party storage with an iSCSI SAN. The architect needs to design a solution that can seamlessly access the current data from a new HPE Moonshot system. How can the HPE Moonshot system access the legacy storage?

A) using native iSCSI target software to connect to the storage on a dedicated LAN
B) using native iSCSI initiator to connect to the storage on a dedicated LAN
C) using native iSCSI initiator to connect to the storage on the management LAN
D) using an HPE Multifunction router to convert iSCSI to Virtual Connect

Question 64

A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform. What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?

A) how to use SCCM to provide a graphical installation method for new nodes
B) how to use VSP to provide a graphical installation method for new nodes
C) how to add an mRCA module to provide a graphical installation method for new nodes
D) how to use iLO remote console to provide a graphical installation method for new nodes

Question 65

A customer has a Hadoop big data and analytics solution. The customer needs a server upgrade to improve performance for this solution and plans to add more solutions that draw on the data, such as a Cassandra NoSQL database. The customer is interested in a flexible HPE Big Data Reference Architecture approach. Which solution meets the customer's needs?

A) HPE Moonshot 1500 Systems with m700 cartridges for co-located compute and storage nodes
B) HPE Apollo 4530 Systems for co-located compute and storage nodes
C) HPE Apollo 8000 Systems for the compute nodes and HPE Superdome X Systems for the storage nodes
D) HPE Moonshot 1500 Systems with m710 cartridges for the compute nodes and HPE Apollo 4200 Systems for the storage nodes

Question 66

Which discussion point describes a Tier I approach to datacenter redundancy levels?

A) optimizing DIMM memory and RAID protected storage
B) composing the solution of basic hypervisor clustering technology
C) using a single path for power and cooling distribution without redundant components
D) implementing primarily a storage redundancy technique

Question 67

A customer has 1,000 virtual machines that run on VMware ESXI servers. The customer is concerned that some of the virtual machines may be oversized, which could affect the other virtual machines. Which HPE product should the architect recommend to help the customer with infrastructure sizing, to improve efficiency, and to reduce cost?

A) HPE Operations Analytics for HPE OneView
B) HPE Insight Control
C) HPE Helion CloudSystem 9
D) HPE Cloud Optimizer for HPE OneView

Question 68

An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console. What should the architect explain to the customer?

A) IT staff can open a Remote Console to any cartridges linked to an mRCA through the iLO CM.
B) Remote console access is only supported when a cartridge is part of an HPE Helion CloudSystem solution.
C) Remote console access is not supported for cartridges; IT staff should use local consoles instead.
D) IT staff can open a Remote Console to any cartridge through the iLO CM.

Question 69

Which statement describes the availability metrics for an HPE system's high availability?

A) All standard HPE servers are designed for 99.9999% availability.
B) A system consisting of HPE standard servers with an availability of 99.9999% and a storage with an availability of 99.99% will have a combined availability of 99.99999%.
C) A system with an availability of 99.99% can be expected to be inoperational for 6 minutes or fewer per year.
D) A system with an availability of 99.999% will statistically not have an unscheduled downtime of more than 1 hour total in 10 years of operation.

Question 70

A customer plans to use Insight Control server provisioning and HPE OneView for vCenter Server. The vCenter Server manages one c7000 enclosure with 16 server blades running VMware ESXI. Which licensing option should the architect include in the proposal?

A) one HPE OneView Standard license for each managed server and one HPE OneView for vCenter Server license for the c7000 enclosure
B) one Insight Control server provisioning license for each managed server
C) one Insight Control server provisioning license for each managed server blade and one HPE OneView for vCenter Server license for the entire c7000 enclosure
D) one HPE OneView Advanced license for each managed server

Question 71

An architect is designing an HPE Apollo 6000 solution to support an HPC application that is highly parallel and involves a lot of communication between compute nodes. The architect is choosing the FlexibleLOM options for the compute trays. Which technology should the architect ensure that the trays support?

A) VXLAN offloading
B) Fibre Channel over Ethernet (FCoE)
C) RDMA over Converged Ethernet (RoCE)
D) iSCSI hardware initiator

Question 72

An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining. Which type of rack configuration should the architect recommend?

A) a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
B) a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
C) a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
D) a configuration in which the HPE Moonshot System hosts the analytics application and the data

Question 73

An architect is designing an HPE Apollo 6000 solution to support an HPC application that is highly parallel and involves a lot of communication between compute nodes. The architect is choosing the FlexibleLOM options for the compute trays. Which technology should the architect ensure that the trays support?

A) VXLAN offloading
B) Fibre Channel over Ethernet (FCoE)
C) RDMA over Converged Ethernet (RoCE)
D) iSCSI hardware imitator

Question 74

What defines lease rate factor (LRF)?

A) the sum of all costs incurred
B) the periodic rental payment, expressed as a percentage of equipment cost
C) the cost of the direct capital expenditure, divided by the expected lifespan of the equipment
D) the expected time to recover the initial investment

Question 75

Which statement describes the availability metrics for an HPE system's high availability?

A) All standard HPE servers are designed for 99.9999% availability.
B) A system consisting of HPE standard servers with an availability of 99.9999% and a storage system with an availability of 99.99% will have a combined availability of 99.99999%.
C) A system with an availability of 99.99% can be expected to be in operational for 6 minutes or fewer per year.
D) A system with an availability of 99.999% will statistically not have an unscheduled downtime of more than 1 hour total in 10 years of operation.

Question 76

A customer is considering upgrading from a BL460c Gen8 to a BL460c Gen9 server. The customer needs to retain the ESXI V5.5 boot volumes and enable UEFI secure boot mode on the new BL460c Gen 9 server. What should the architect explain to the customer?

A) The ESXI V5.5 volume will not boot in UEFI mode.
B) The server must be configured to support GPT boot drives.
C) ESXI V5.5 needs to be patched up to ESXI V6.
D) Secure boot mode must be enabled and certificate installed.

Question 77

An architect explains a software-defined data center (SDDC) concept and its benefits to a customer. The customer indicates an interest and so the architect needs to verify whether the customer is ready to move to the SDDC. Which additional information should the architect obtain from the customer to verify this?

A) whether they already virtualize compute and storage resources
B) whether they have a disaster recovery plan implemented
C) whether they have standardized on a single vendor
D) whether they have a workplace mobility plan implemented

Question 78

A customer has an HPE Integrity Superdome X solution. The customer requires flexible nPartitions that IT staff can quickly build at different times based on a pre-defined template. Which approach should the architect recommend the customer take to meet this requirement?

A) Create nPartition configs using the iLO GUI for the HPE Integrity Superdome X blades.
B) Create nPartition build plans in HPE Insight Control server provisioning (ICsp).
C) Create server templates in HPE OneView 2.0.
D) Create ParSpecs in the HPE Superdome Onboard Administrator (SD OA).

Question 79

View the Exhibit. Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature. The customer reports slow network response. Which modification can the architect recommend to improve network performance?

A) Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules.
B) Change the FlexFabric adapter modules with Flex-10 adapter modules.
C) Remove the Management network from the uplinks.
D) Put the vMotion network in a separate uplink set and disable "Private Network".

Question 80

What is one advantage of hard partitioning, or nPartitioning, for HPE Integrity Superdome X as compared to virtual partitioning?

A) It permits the flexibility to assign different processor cores on the same processors to different partitions
B) It allows a single blade to support more guest operating systems
C) It provides greater reliability because partitions are electronically isolated
D) It enables HPE Helion CloudSystem to deploy VMs to the Integrity Superdome X System