Question 1

One feature of the newer Ethernet/IP driver is that RSLinx browses the local subnet, automatically finds devices with compatible IP addresses, and then finishes configuring the driver for you.

Accepted Answer

A) True 
 B)False  True

Question 2

In the Configure Drivers window, the driver that can only be used to configure a driver for the newer modular Ethernet/IP communications modules for the modular ControlLogix chassis and CompactLogix with Ethernet/IP. is the ____________________ driver.

Accepted Answer

Ethernet/IP

Question 3

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

Accepted Answer

A) True 
 B)False  False

Question 4

The Ethernet driver for the CompactLogix Ethernet controller must be configured prior to configuring the personal computer with which communication is desired.

Accepted Answer

A) True 
 B)False

Question 5

If communication was lost between your computer and the Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon,

Accepted Answer

A) True 
 B)False

Question 6

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Accepted Answer

The answer of After a driver has been configured, open...

Question 7

In the event of a failed attempt to configure a driver for an Ethernet module, what is a simple error that may have occurred?

Accepted Answer

The answer of In the event of a failed attempt...

Question 8

If desired, the default driver name provided by RSLinx during configuration can be changed in the Add New RSLinx Classic Driver window.

Accepted Answer

A) True 
 B)False

Question 9

What steps can be taken if the word "running" is not listed twice for a configured Ethernet driver in the Configure Drivers window?

Accepted Answer

The answer of What steps can be taken if the...

Question 10

When configuring a Ethernet/IP driver for a Bulletin 1769 CompactLogix controller using RSLinx, select an Ethernet crossover cable to connect the module and the personal computer.

Accepted Answer

A) True 
 B)False

Question 11

Suppose a yellow question mark and text stating unrecognized device are displayed in the RSWho window. Briefly describe the problem and how it can likely be resolved.

Accepted Answer

The answer of Suppose a yellow question mark and text...

Question 12

The older ____________________ driver can be used to configure most Ethernet modules; however, it is typically used for the 1756-ENET module.

Accepted Answer

The answer of The older ____________________ driver can be used...

Question 13

When configuring a driver for a CompactLogix Ethernet module, suppose the personal computer IP address is not available as a selection as an Ethernet interface. What are two checks that can be performed?

Accepted Answer

The answer of When configuring a driver for a CompactLogix...

Question 14

Manually configuring a driver using the Ethernet devices driver can be used to display only the desired Ethernet/IP devices in RSWho.

Accepted Answer

A) True 
 B)False

Question 15

An RSLinx driver can be deleted at any time and reconfigured to resolve problems with the driver.

Accepted Answer

A) True 
 B)False

Exam 28: Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

One feature of the newer Ethernet/IP driver is that RSLinx browses the local subnet, automatically finds devices with compatible IP addresses, and then finishes configuring the driver for you.

In the Configure Drivers window, the driver that can only be used to configure a driver for the newer modular Ethernet/IP communications modules for the modular ControlLogix chassis and CompactLogix with Ethernet/IP. is the ____________________ driver.

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

The Ethernet driver for the CompactLogix Ethernet controller must be configured prior to configuring the personal computer with which communication is desired.

If communication was lost between your computer and the Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon,

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

In the event of a failed attempt to configure a driver for an Ethernet module, what is a simple error that may have occurred?

If desired, the default driver name provided by RSLinx during configuration can be changed in the Add New RSLinx Classic Driver window.

What steps can be taken if the word "running" is not listed twice for a configured Ethernet driver in the Configure Drivers window?

When configuring a Ethernet/IP driver for a Bulletin 1769 CompactLogix controller using RSLinx, select an Ethernet crossover cable to connect the module and the personal computer.

Suppose a yellow question mark and text stating unrecognized device are displayed in the RSWho window. Briefly describe the problem and how it can likely be resolved.

The older ____________________ driver can be used to configure most Ethernet modules; however, it is typically used for the 1756-ENET module.

When configuring a driver for a CompactLogix Ethernet module, suppose the personal computer IP address is not available as a selection as an Ethernet interface. What are two checks that can be performed?

Manually configuring a driver using the Ethernet devices driver can be used to display only the desired Ethernet/IP devices in RSWho.

An RSLinx driver can be deleted at any time and reconfigured to resolve problems with the driver.