Question 1

A collapse zone for a Type IV structure should be established when:

Accepted Answer

A)  its veneer begins to curtain collapse. 
B)  walls begin to shift because the building is twisting. 
C)  the structure has been weakened by repeated fires over time. 
D)  it has been determined that glass shards will be directed at on-scene personnel. 
A)  its veneer begins to curtain collapse. 
B)  walls begin to shift because the building is twisting. 
C)  the structure has been weakened by repeated fires over time. 
D)  it has been determined that glass shards will be directed at on-scene personnel.

Question 2

Green wood has a high_______ that affects burn rate.

Accepted Answer

A)  spalling point 
B)  heat resistance 
C)  moisture content 
D)  failure temperature 
A)  spalling point 
B)  heat resistance 
C)  moisture content 
D)  failure temperature

Question 3

Which of the following BEST describes where the collapse zone is established?

Accepted Answer

A)  Adjacent to any exposed interior walls 
B)  Adjacent to any exposed exterior walls 
C)  Near any area that is 10 feet (3.04 m) from exterior walls 
D)  Near any area that is 20 feet (6.09 m) from exterior walls 
A)  Adjacent to any exposed interior walls 
B)  Adjacent to any exposed exterior walls 
C)  Near any area that is 10 feet (3.04 m) from exterior walls 
D)  Near any area that is 20 feet (6.09 m) from exterior walls

Question 4

Which of the following metals will be affected by heat more rapidly than steel?

Accepted Answer

A)  Tin 
B)  Lead 
C)  Copper 
D)  Aluminum 
A)  Tin 
B)  Lead 
C)  Copper 
D)  Aluminum

Question 5

Which of the following BEST describes a possible construction hazard?

Accepted Answer

A)  Fire detection systems may be damaged. 
B)  Furnishings may contribute to fire spread. 
C)  The building is subject to rapid fire spread because protective features are not in place. 
D)  Danger increases because occupants and belongings remain in one part of the building while work goes on in the other. 
A)  Fire detection systems may be damaged. 
B)  Furnishings may contribute to fire spread. 
C)  The building is subject to rapid fire spread because protective features are not in place. 
D)  Danger increases because occupants and belongings remain in one part of the building while work goes on in the other.

Question 6

The interior elements in what type of construction are made of solid or laminated wood with no concealed space?

Accepted Answer

A)  Type II 
B)  Type III 
C)  Type IV 
D)  Type V 
A)  Type II 
B)  Type III 
C)  Type IV 
D)  Type V

Question 7

Which of the following BEST describes who determines a structure's construction classification type?

Accepted Answer

A)  Contractor, architect, city official 
B)  City official, property owner, contractor 
C)  Architect, structural engineer, contractor 
D)  Structural engineer, contractor, city official 
A)  Contractor, architect, city official 
B)  City official, property owner, contractor 
C)  Architect, structural engineer, contractor 
D)  Structural engineer, contractor, city official

A collapse zone for a Type IV structure should be established when:

Green wood has a high_______ that affects burn rate.

Which of the following BEST describes where the collapse zone is established?

Which of the following metals will be affected by heat more rapidly than steel?

Which of the following BEST describes a possible construction hazard?

The interior elements in what type of construction are made of solid or laminated wood with no concealed space?

Which of the following BEST describes who determines a structure's construction classification type?

Orientation and Fire Service History

Firefighter Safety and Health

Fire Department Communications Firefighter I

Fire Behavior

Firefighter Personal Protective Equipment

Portable Fire Extinguishers

Ropes, Webbing, and Knots

Structural Search, Victim Removal, and Firefighter Survival

Scene Lighting, Rescue Tools, Vehicle Extrication, and Technical Rescue Firefighter II

Forcible Entry

Ground Ladders

Tactical Ventilation

Water Supply

Fire Hose - Firefighter I

Fire Streams Firefighter II

Fire Control Firefighter I

Loss Control

Fire Origin and Cause Determination Firefighter II

Fire Protection Systems Firefighter II

Fire and Life Safety Initiatives Firefighter II

Emergency Medical Care for Fire Department First Responders

Hazards, Behavior, and Identification of Haz Matwmd

Mitigation of Haz Matwmd Incidents

Filters

Exam 4: Building Construction Firefighter I

A collapse zone for a Type IV structure should be established when:

Green wood has a high_______ that affects burn rate.

Which of the following BEST describes where the collapse zone is established?

Which of the following metals will be affected by heat more rapidly than steel?

Which of the following BEST describes a possible construction hazard?

The interior elements in what type of construction are made of solid or laminated wood with no concealed space?

Which of the following BEST describes who determines a structure's construction classification type?

Orientation and Fire Service History

Firefighter Safety and Health

Fire Department Communications Firefighter I

Fire Behavior

Firefighter Personal Protective Equipment

Portable Fire Extinguishers

Ropes, Webbing, and Knots

Structural Search, Victim Removal, and Firefighter Survival

Scene Lighting, Rescue Tools, Vehicle Extrication, and Technical Rescue Firefighter II

Forcible Entry

Ground Ladders

Tactical Ventilation

Water Supply

Fire Hose - Firefighter I

Fire Streams Firefighter II

Fire Control Firefighter I

Loss Control

Fire Origin and Cause Determination Firefighter II

Fire Protection Systems Firefighter II

Fire and Life Safety Initiatives Firefighter II

Emergency Medical Care for Fire Department First Responders

Hazards, Behavior, and Identification of Haz Matwmd

Mitigation of Haz Matwmd Incidents

Filters