Question 1

A drip loop's lowest point has a minimum vertical clearance of ____.

Accepted Answer

A)  4 ft (1.2 m) 
B)  6 ft (1.8 m) 
C)  8 ft (2.4 m) 
D)  10 ft (3.0 m) 
A)  4 ft (1.2 m) 
B)  6 ft (1.8 m) 
C)  8 ft (2.4 m) 
D)  10 ft (3.0 m)

Question 2

The maximum distance to any receptacle, measured horizontally along the wall line, is ____.

Accepted Answer

A)  6 in.(150 mm) 
B)  12 in.(300 mm) 
C)  18 in.(450 mm) 
D)  24 in.(600 mm) 
A)  6 in.(150 mm) 
B)  12 in.(300 mm) 
C)  18 in.(450 mm) 
D)  24 in.(600 mm)

Question 3

The vertical clearance above roof level must be maintained for a distance of at least ____ from all edges of the roof.

Accepted Answer

A)  3 ft (900 mm) 
B)  4 ft (1.2 m) 
C)  6 ft (1.8 m) 
D)  8 ft (2.4 m) 
A)  3 ft (900 mm) 
B)  4 ft (1.2 m) 
C)  6 ft (1.8 m) 
D)  8 ft (2.4 m)

Question 4

____ is defined as the underground conductors between the utility electric supply system and the service point.

Accepted Answer

A)  Service lateral 
B)  Primary branch 
C)  Ancillary service 
D)  Connection branch 
A)  Service lateral 
B)  Primary branch 
C)  Ancillary service 
D)  Connection branch

Question 5

The recommended voltage drop for a branch circuit is ____ % or less.

Accepted Answer

A)  1 
B)  5 
C)  3 
D)  7 
A)  1 
B)  5 
C)  3 
D)  7

A drip loop's lowest point has a minimum vertical clearance of ____.

The maximum distance to any receptacle, measured horizontally along the wall line, is ____.

The vertical clearance above roof level must be maintained for a distance of at least ____ from all edges of the roof.

____ is defined as the underground conductors between the utility electric supply system and the service point.

The recommended voltage drop for a branch circuit is ____ % or less.

Introduction to the National Electrical Code

Definitions

Boxes and Enclosures

Cables

Raceways and Conductors

General Provisions

Specific Provisions

Load Calculations

Services and Electrical Equipment

Load Calculations

General Provisions

Nondwelling Load Calculations

Services Feeders and Equipment

Hazardous Classified Locations

Health Care

Industrial Locations

Special Occupancies

Specific Equipment

Filters

Exam 10: Comprehensive Provisions

A drip loop's lowest point has a minimum vertical clearance of ____.

The maximum distance to any receptacle, measured horizontally along the wall line, is ____.

The vertical clearance above roof level must be maintained for a distance of at least ____ from all edges of the roof.

____ is defined as the underground conductors between the utility electric supply system and the service point.

The recommended voltage drop for a branch circuit is ____ % or less.

Introduction to the National Electrical Code

Definitions

Boxes and Enclosures

Cables

Raceways and Conductors

General Provisions

Specific Provisions

Load Calculations

Services and Electrical Equipment

Load Calculations

General Provisions

Nondwelling Load Calculations

Services Feeders and Equipment

Hazardous Classified Locations

Health Care

Industrial Locations

Special Occupancies

Specific Equipment

Filters