Exam 16: Video, Voice, and Data Wiring Installation

A standard network interface box is used when the telephone company terminates their wiring outside the house.

When the prefix "M" (Mega) is used in a unit of measurement, such as 100 MHz, it means __________.

Category 6a UTP cable has a 500 MHz bandwidth.

Electrical noise coupled from one pair of wires to another within a multipair voice or data cable is called _________.

An STP cable resembles a UTP cable but has a foil shield over the wire pairs and offers more electromagnetic interference protection than UTP in a voice or data installation.

Because hard wired telephone systems use DC, the standard wiring practice is to use the "tip" as the ____________________ conductor.

Category __________ cable is the preferred UTP cable for residential voice and data applications.

ANSI/TIA/EIA 570-C provides specifications for the installation of voice, data, and video premises cabling systems in single family and multifamily residential buildings.

Coaxial cable that is limited to use in dwelling units or in raceways is labeled __________.

ANSI/TIA/EIA 570-C was developed to establish a standard for a __________ structured cabling system that can accommodate many different applications.

________ refers to the process of making measurements and then comparing the results obtained to pre-defined standards, so that a pass/fail determination can be made.

The letters "RG" on a coaxial cable stand for __________ guide.