Question 1

What are the major components and markings of a micrometer?

Accepted Answer

The major components and markings of a micrometer include: 
∙ frame 
∙ anvil 
∙ spindle 
∙ locknut 
∙ sleeve 
∙ sleeve numbers 
∙ sleeve long line 
∙ thimble marks 
∙ thimble 
∙ ratchet

Question 2

List the three drive sizes for light-duty impact wrenches and two drive sizes for heavy-duty wrenches/.

Accepted Answer

Light-duty impact wrenches are available in three drive sizes: 1/4, 3/8, and 1/2 
Heavy-duty impact wrenches are available in two drive sizes: 3/4 and 1 inch

Question 3

Which character of a vehicle's VIN represents the country of origin (manufacture)?

Accepted Answer

A)  the first 
B)  the third 
C)  the eighth 
D)  the tenth 
A)  the first 
B)  the third 
C)  the eighth 
D)  the tenth A

Question 4

Technician A says fatigue breaks are the most common type of bolt failure. Technician B says overtightening the bolt causes a fatigue break. Who is more correct?

Accepted Answer

A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B 
A)  A only 
B)  B only 
C)  both A and B 
D)  neither A nor B

Question 5

What are the two basic jack designs?

Accepted Answer

The two basic jack designs are

Question 6

Backlash is the clearance between two gears in mesh.

Accepted Answer

A) True 
 B)False

Question 7

_____ are a necessary part of transmission and driveline service.

Accepted Answer

A)  Service manuals 
B)  Lifting tools 
C)  Jack stands 
D)  Power tools 
A)  Service manuals 
B)  Lifting tools 
C)  Jack stands 
D)  Power tools

Question 8

List three examples of power tools used in the shop.

Accepted Answer

(Answers may vary) 
Examples o

Question 9

When tightening bolts, Newton-meters and foot-pounds are measures of _____.

Accepted Answer

A)  horsepower 
B)  effort 
C)  power 
D)  torque 
A)  horsepower 
B)  effort 
C)  power 
D)  torque

Question 10

A voluntary certification program for automotive, heavy-duty truck, auto body repair, and engine machine shop technicians is offered by _____.

Accepted Answer

A)  the automotive manfacturers' association 
B)  the NIASE 
C)  local OSHA Consultation Offices 
D)  the federal government 
A)  the automotive manfacturers' association 
B)  the NIASE 
C)  local OSHA Consultation Offices 
D)  the federal government

Question 11

A foot-pound is the work or pressure accomplished by a force of one pound through a distance of one foot.

Accepted Answer

A) True 
 B)False

Question 12

What are the three most common types of torque wrenches?

Accepted Answer

The three most common types of

Question 13

The primary source of repair and specification information for any car, van, or truck is the _____.

Accepted Answer

A)  vehicle owner 
B)  shop owner 
C)  parts manager 
D)  manufacturer 
A)  vehicle owner 
B)  shop owner 
C)  parts manager 
D)  manufacturer

Question 14

What type of information is contained in the VIN?

Accepted Answer

The VIN is made up of 17 characters and

Question 15

How is power furnished to power tools?

Accepted Answer

Power is furnished t

Question 16

List and explain the obligations of an employee in an automotive repair shop.

Accepted Answer

The obligations of an employee in an aut

Question 17

The effect on torque on a properly tightened bolt is that it will be "spring loaded" or _____.

Accepted Answer

A)  torqued to stretch slightly 
B)  at its elastic limit 
C)  have stripped threads 
D)  preloaded 
A)  torqued to stretch slightly 
B)  at its elastic limit 
C)  have stripped threads 
D)  preloaded

Question 18

_____ are one of the most commonly used types of fasteners, and include bolts, nuts, screws, and similar items that allow a technician to install or remove parts easily.

Accepted Answer

A)  Studs 
B)  Threaded fasteners 
C)  Bearings 
D)  Fillets 
A)  Studs 
B)  Threaded fasteners 
C)  Bearings 
D)  Fillets

Question 19

The effect on torque on a properly tightened bolt is that it will be "spring loaded" or _____.

Accepted Answer

A)  torqued to stretch slightly 
B)  at its elastic limit 
C)  have stripped threads 
D)  preloaded 
A)  torqued to stretch slightly 
B)  at its elastic limit 
C)  have stripped threads 
D)  preloaded

Question 20

If a technician spends more time on a repair job than the flat rate states, he is typically compensated for the extra time spent.

Accepted Answer

A) True 
 B)False

What are the major components and markings of a micrometer?

List the three drive sizes for light-duty impact wrenches and two drive sizes for heavy-duty wrenches/.

Which character of a vehicle's VIN represents the country of origin (manufacture)?

Technician A says fatigue breaks are the most common type of bolt failure. Technician B says overtightening the bolt causes a fatigue break. Who is more correct?

What are the two basic jack designs?

Backlash is the clearance between two gears in mesh.

_____ are a necessary part of transmission and driveline service.

List three examples of power tools used in the shop.

When tightening bolts, Newton-meters and foot-pounds are measures of _____.

A voluntary certification program for automotive, heavy-duty truck, auto body repair, and engine machine shop technicians is offered by _____.

A foot-pound is the work or pressure accomplished by a force of one pound through a distance of one foot.

What are the three most common types of torque wrenches?

The primary source of repair and specification information for any car, van, or truck is the _____.

What type of information is contained in the VIN?

How is power furnished to power tools?

List and explain the obligations of an employee in an automotive repair shop.

The effect on torque on a properly tightened bolt is that it will be "spring loaded" or _____.

_____ are one of the most commonly used types of fasteners, and include bolts, nuts, screws, and similar items that allow a technician to install or remove parts easily.

The effect on torque on a properly tightened bolt is that it will be "spring loaded" or _____.

If a technician spends more time on a repair job than the flat rate states, he is typically compensated for the extra time spent.

Manual Drive Trains and Axles Safety

Clutches Servicing Clutches

Servicing Transmissionstransaxles Manual Transmissions Transaxles

Front Drive Axles Servicing Front Drive Axles

Drive Shafts and Universal Joints Servicing Drive Shafts and Universal Joints

Differentials and Drive Axles

Four Wheel Drive Systems Servicing Four-Wheel Drive Systems

Diagnosing 4wd and Awd Control Systems Advanced Four-Wheel-Drive Systems

Drivetrain Electrical and Electronic Systems Servicing Drivetrain Electrical Systems

Electronically Controlled and Automated Transmissions Diagnosing Advanced Electronic Systems

Filters

Exam 2: Drivetrain Theory Special Tools and Procedures Shop Manual

What are the major components and markings of a micrometer?

List the three drive sizes for light-duty impact wrenches and two drive sizes for heavy-duty wrenches/.

Which character of a vehicle's VIN represents the country of origin (manufacture)?

Technician A says fatigue breaks are the most common type of bolt failure. Technician B says overtightening the bolt causes a fatigue break. Who is more correct?

What are the two basic jack designs?

Backlash is the clearance between two gears in mesh.

_____ are a necessary part of transmission and driveline service.

List three examples of power tools used in the shop.

When tightening bolts, Newton-meters and foot-pounds are measures of _____.

A voluntary certification program for automotive, heavy-duty truck, auto body repair, and engine machine shop technicians is offered by _____.

A foot-pound is the work or pressure accomplished by a force of one pound through a distance of one foot.

What are the three most common types of torque wrenches?

The primary source of repair and specification information for any car, van, or truck is the _____.

What type of information is contained in the VIN?

How is power furnished to power tools?

List and explain the obligations of an employee in an automotive repair shop.

The effect on torque on a properly tightened bolt is that it will be "spring loaded" or _____.

_____ are one of the most commonly used types of fasteners, and include bolts, nuts, screws, and similar items that allow a technician to install or remove parts easily.

The effect on torque on a properly tightened bolt is that it will be "spring loaded" or _____.

If a technician spends more time on a repair job than the flat rate states, he is typically compensated for the extra time spent.

Manual Drive Trains and Axles Safety

Clutches Servicing Clutches

Servicing Transmissionstransaxles Manual Transmissions Transaxles

Front Drive Axles Servicing Front Drive Axles

Drive Shafts and Universal Joints Servicing Drive Shafts and Universal Joints

Differentials and Drive Axles

Four Wheel Drive Systems Servicing Four-Wheel Drive Systems

Diagnosing 4wd and Awd Control Systems Advanced Four-Wheel-Drive Systems

Drivetrain Electrical and Electronic Systems Servicing Drivetrain Electrical Systems

Electronically Controlled and Automated Transmissions Diagnosing Advanced Electronic Systems

Filters