Question 1

When designing a LAN, ____ is/are a good option for universal access to a Web site used to market products.

Accepted Answer

A) frame relay 
B) T-3 lines 
C) satellite communications 
D) DSL lines 
A) frame relay 
B) T-3 lines 
C) satellite communications 
D) DSL lines

Question 2

The figure above illustrates ____.

Accepted Answer

A) a peer-to-peer design for an 802.11a network 
B) a peer-to-peer design for an 802.11b network 
C) a multiple-cell design for an 802.11a network 
D) a multiple-cell design for an 802.11b network 
A) a peer-to-peer design for an 802.11a network 
B) a peer-to-peer design for an 802.11b network 
C) a multiple-cell design for an 802.11a network 
D) a multiple-cell design for an 802.11b network

Question 3

A(n)___________________________________ is a customized integrated circuit on a chip that contains logic for a specific application, such as fast routing logic.

Accepted Answer

applicatio

Question 4

Older thinnet/thicknet cable plants cannot meet the high throughput requirements for traffic created by modern software and by software upgrades.

Accepted Answer

A) True 
 B)False

Question 5

Which is not an advantage of interspersing hosts and servers throughout the network?

Accepted Answer

A) It is cheaper. 
B) Traffic is less concentrated. 
C) There is flexibility in the event that a disaster destroys one location. 
D) You can have redundant hosts at different locations, in case one host malfunctions or cannot be reached because of network problems. 
A) It is cheaper. 
B) Traffic is less concentrated. 
C) There is flexibility in the event that a disaster destroys one location. 
D) You can have redundant hosts at different locations, in case one host malfunctions or cannot be reached because of network problems.

Question 6

Modern networks employ both switches and hubs.

Accepted Answer

A) True 
 B)False

Question 7

When designing a LAN, ____ is/are a good option to join LANs in neighboring states.

Accepted Answer

A) frame relay 
B) T-3 lines 
C) satellite communications 
D) DSL lines 
A) frame relay 
B) T-3 lines 
C) satellite communications 
D) DSL lines

Question 8

When you are installing a network, ensure that the tension when pulling twisted-pair cable does not exceed ____ pounds of force.

Accepted Answer

A) 15 
B) 50 
C) 25 
D) 30 
A) 15 
B) 50 
C) 25 
D) 30

Question 9

The drawback to jamming is that ____.

Accepted Answer

A) it halts network traffic 
B) currently active frames can be lost 
C) it cannot be used in half-duplex mode 
D) Both A and B. 
A) it halts network traffic 
B) currently active frames can be lost 
C) it cannot be used in half-duplex mode 
D) Both A and B.

Question 10

Which is not included in network capacity management?

Accepted Answer

A) the number of users 
B) the need for new software 
C) the network bandwidth needed to accommodate the load on each network segment 
D) None of the above. 
A) the number of users 
B) the need for new software 
C) the network bandwidth needed to accommodate the load on each network segment 
D) None of the above.

Question 11

Which is not a principle followed by the vertical wiring on your network?

Accepted Answer

A) It should deployed in an extended star topology between devices. 
B) You should use high-speed cable, typically singlemode fiber-optic cable. 
C) Install riser rated cable for cable runs through cable ports or vertical shafts. 
D) None of the above. 
A) It should deployed in an extended star topology between devices. 
B) You should use high-speed cable, typically singlemode fiber-optic cable. 
C) Install riser rated cable for cable runs through cable ports or vertical shafts. 
D) None of the above.

Question 12

When you are installing a network, install ____ cable for long runs, such as for long distances between buildings.

Accepted Answer

A) single-mode fiber-optic 
B) coaxial 
C) twisted-pair 
D) multi-mode fiber-optic 
A) single-mode fiber-optic 
B) coaxial 
C) twisted-pair 
D) multi-mode fiber-optic

Question 13

An example of a host or server ____ is a grouping of mainframes placed in a computer machine room.

Accepted Answer

A) conglomeration 
B) farm 
C) concentration 
D) batch 
A) conglomeration 
B) farm 
C) concentration 
D) batch

Question 14

The maximum cable bend radius for more than four-pair twisted-pair cable is about ____ times the circumference of the cable.

Accepted Answer

A) two 
B) four 
C) eight 
D) ten 
A) two 
B) four 
C) eight 
D) ten

Question 15

In the context of this book, ____________________ refers to installing cable that fans out in a horizontal star fashion from one or more centralized chassis switches or hubs located in telecommunications rooms or wiring closets.

Accepted Answer

The answer of In the context of this book, ____________________...

Question 16

When undertaking any LAN or WAN design objects, you must consider the costs. What are six elements for which you need to project costs?

Accepted Answer

Elements for which you need to project c

Question 17

A(n)____ is not used to connect a LAN or local site to a WAN.

Accepted Answer

A) ATM WAN access switch 
B) multiplexor 
C) specialized adapter 
D) hub 
A) ATM WAN access switch 
B) multiplexor 
C) specialized adapter 
D) hub

Question 18

If a multimedia application is designed to use broadcasting , the participating workstations are divided into one or more subscription groups. Each data stream is a one-time multimedia transmission that goes to multiple addresses, instead of a single transmission sent to each address.

Accepted Answer

A) True 
 B)False

Question 19

When installing a network, make sure all cable run distances fit the appropriate ____ specifications for the medium used.

Accepted Answer

A) ITU 
B) CCITT 
C) EIA/TIA 
D) IEEE 
A) ITU 
B) CCITT 
C) EIA/TIA 
D) IEEE

Question 20

It is easier to grow a legacy 10Base2 traditional bus network than a legacy 10BaseT star-based network.

Accepted Answer

A) True 
 B)False

When designing a LAN, ____ is/are a good option for universal access to a Web site used to market products.

The figure above illustrates ____.

A(n)___________________________________ is a customized integrated circuit on a chip that contains logic for a specific application, such as fast routing logic.

Older thinnet/thicknet cable plants cannot meet the high throughput requirements for traffic created by modern software and by software upgrades.

Which is not an advantage of interspersing hosts and servers throughout the network?

Modern networks employ both switches and hubs.

When designing a LAN, ____ is/are a good option to join LANs in neighboring states.

When you are installing a network, ensure that the tension when pulling twisted-pair cable does not exceed ____ pounds of force.

The drawback to jamming is that ____.

Which is not included in network capacity management?

Which is not a principle followed by the vertical wiring on your network?

When you are installing a network, install ____ cable for long runs, such as for long distances between buildings.

An example of a host or server ____ is a grouping of mainframes placed in a computer machine room.

The maximum cable bend radius for more than four-pair twisted-pair cable is about ____ times the circumference of the cable.

In the context of this book, ____________________ refers to installing cable that fans out in a horizontal star fashion from one or more centralized chassis switches or hubs located in telecommunications rooms or wiring closets.

When undertaking any LAN or WAN design objects, you must consider the costs. What are six elements for which you need to project costs?

A(n)____ is not used to connect a LAN or local site to a WAN.

If a multimedia application is designed to use broadcasting , the participating workstations are divided into one or more subscription groups. Each data stream is a one-time multimedia transmission that goes to multiple addresses, instead of a single transmission sent to each address.

When installing a network, make sure all cable run distances fit the appropriate ____ specifications for the medium used.

It is easier to grow a legacy 10Base2 traditional bus network than a legacy 10BaseT star-based network.

Lan/Wan Networking: an Overview

Lan/Wan Interconnectivity

Physical Transmission Options

Network Transmission Equipment

Lan Protocols

Tcp/Ip Past, Present, and Future

Wan Transport Methods

ATM Technologies

Wireless Technologies

Integrating Voice, Video, and Data

Filters

Exam 11: Lan and Wan Design: Putting It All Together

When designing a LAN, ____ is/are a good option for universal access to a Web site used to market products.

The figure above illustrates ____.

A(n)___________________________________ is a customized integrated circuit on a chip that contains logic for a specific application, such as fast routing logic.

Older thinnet/thicknet cable plants cannot meet the high throughput requirements for traffic created by modern software and by software upgrades.

Which is not an advantage of interspersing hosts and servers throughout the network?

Modern networks employ both switches and hubs.

When designing a LAN, ____ is/are a good option to join LANs in neighboring states.

When you are installing a network, ensure that the tension when pulling twisted-pair cable does not exceed ____ pounds of force.

The drawback to jamming is that ____.

Which is not included in network capacity management?

Which is not a principle followed by the vertical wiring on your network?

When you are installing a network, install ____ cable for long runs, such as for long distances between buildings.

An example of a host or server ____ is a grouping of mainframes placed in a computer machine room.

The maximum cable bend radius for more than four-pair twisted-pair cable is about ____ times the circumference of the cable.

In the context of this book, ____________________ refers to installing cable that fans out in a horizontal star fashion from one or more centralized chassis switches or hubs located in telecommunications rooms or wiring closets.

When undertaking any LAN or WAN design objects, you must consider the costs. What are six elements for which you need to project costs?

A(n)____ is not used to connect a LAN or local site to a WAN.

If a multimedia application is designed to use broadcasting , the participating workstations are divided into one or more subscription groups. Each data stream is a one-time multimedia transmission that goes to multiple addresses, instead of a single transmission sent to each address.

When installing a network, make sure all cable run distances fit the appropriate ____ specifications for the medium used.

It is easier to grow a legacy 10Base2 traditional bus network than a legacy 10BaseT star-based network.

Lan/Wan Networking: an Overview

Lan/Wan Interconnectivity

Physical Transmission Options

Network Transmission Equipment

Lan Protocols

Tcp/Ip Past, Present, and Future

Wan Transport Methods

ATM Technologies

Wireless Technologies

Integrating Voice, Video, and Data

Filters