Exam 12: Completing a Floor Plan With Cad

To start drawing a second floor, you should create the needed layers and then _____ the main floor information.

A wall 16'-2'' will require ____ sheets of OSB, with 3'-10'' left over.

Cabinets should be drawn using which two commands?

Even if you are drawing plans for a construction site where seismic risk is high, you can alter window placement depending on whether an engineer supervises the design or the design follows the prescriptive path of the IRC.

If the home is being designed for universal appeal, all doors on an access route must have a minimum of ____ of clearance.

Residential floor plans are usually plotted at a scale of 1'' = 1'-0''.

Depending on the complexity of the project, dimensions may be placed on the floor plan or framing plan, but not on both.

As a base drawing, the floor plan can be saved and related information can be attached using the ____ command.

An important key to remember on multilevel homes is to never move one floor level without moving all levels.

What sheet number should be assigned to the main floor plan?

A minimum of ____ is usually placed between window openings.

When placing symbols on the floor plan, you should represent changes in floor levels, such as lowered floors, on which layer?

To keep drawings stacked, you should thaw all layers after moving one layer.

You should allow for a minimum of ____ at the interior edge of windows near a corner of bay windows.

When placing symbols on the floor plan, you should represent the kitchen plumbing fixtures, such as the main work sink, vegetable sink or party sink, on the ____ layer.