Exam 9: Linear Measure
Exam 1: Organization of the Industry28 Questions
Exam 2: Working in the Industry19 Questions
Exam 3: Green Construction28 Questions
Exam 4: Jobsite Safety31 Questions
Exam 5: Safety With Ladders, Scaffolds, and Machines20 Questions
Exam 6: Whole Numbers20 Questions
Exam 7: Decimals21 Questions
Exam 8: Fractions21 Questions
Exam 9: Linear Measure24 Questions
Exam 10: Percent Percentage17 Questions
Exam 11: Area and Volume21 Questions
Exam 12: Right Angles25 Questions
Exam 13: Combined Operations10 Questions
Exam 14: Hand Tools-Selection, Use and Care12 Questions
Exam 15: Power Tools-Selection, Use, and Care21 Questions
Exam 16: Fasteners21 Questions
Exam 17: Rigging21 Questions
Exam 18: Views10 Questions
Exam 19: Scales14 Questions
Exam 20: Alphabet of Lines16 Questions
Exam 21: Use of Symbols20 Questions
Exam 22: Plan Views13 Questions
Exam 23: Elevations10 Questions
Exam 24: Sections and Details10 Questions
Select questions type
What is the perimeter of a circle called?
Free
(Short Answer)
4.9/5
(35)
Correct Answer:
circumference
Insulation must be ____________________ wide in order to be wrapped around a duct pipe that is 6 inches in diameter.
Free
(Short Answer)
4.9/5
(37)
Correct Answer:
18.85"
100 meters equals ____________________ dekameters.
Free
(Short Answer)
4.9/5
(39)
Correct Answer:
10
How many conduit supports are required on a conduit run of 123', if the conduit must be supported every 5'?
(Short Answer)
4.8/5
(48)
Explain why the actual measurements and the nominal measurements of an 8" × 8" × 16" concrete block are different.
(Short Answer)
4.9/5
(35)
A steel girder spans an opening of a 25' 6". If a support pole is placed in the center, the measurement from the edge of the opening must be ____________________.
(Short Answer)
4.9/5
(43)
The perimeter of a house that is 23' wide and 51' long is ____________________.
(Short Answer)
4.9/5
(36)
The distance around the outside of something is its __________.
(Short Answer)
4.9/5
(39)
The perimeter of a room that measures 17 feet on each side is ____________________.
(Short Answer)
4.9/5
(39)
__________ are the dimensions of a product before any allowances or adjustments are made.
(Short Answer)
4.9/5
(35)
List the major units of measure used in the U.S. customary system.
(Short Answer)
4.7/5
(30)
The actual measurements of a 2" × 4" stud are ____________________.
(Short Answer)
4.8/5
(40)
Showing 1 - 20 of 24
Filters
- Essay(0)
- Multiple Choice(0)
- Short Answer(0)
- True False(0)
- Matching(0)