Exam 11: Network Settings and Wireless LAN Troubleshooting

Filtering can be performed by configuring the access point so that it acts as a type of ____.

When using WEP as part of the transitional security model, the same ____ key must be installed on the access point and the device. If not the wireless device may not operate properly.

When an access point is first turned on or when Mobile IP is first enabled on an access point, it obtains its own home agent information through advertising.

The default protocol of older Novell Net-Ware LANs is ____.

When a stronger signal from one wireless device drowns out another a(n) ____ problem is occurring.

What is a good first step in diagnosing system throughput issues?

Some computer viruses are known to cause ____.

List some strategies for making IEEE 802.11b/g and Bluetooth devices work together.

When configuring advanced settings for an AP, the ____ is the domain that is serving the AP.

What is the purpose of the Ethernet Timeout setting on an access point?

When using PSK (pre-shared key) authentication, the key value must be entered in both the Network key and Confirm network key fields and must match the key on the access point.

What are some of the factors that influence system throughput?

When enabling Ethernet Timeout, the value in the Seconds field is generally set to between 30 and ____.

If the wireless device is configured for DHCP yet no DHCP server is active, then Windows assigns a(n) ____________________ IP Addressing address that begins with the IP range 169.254.x.x.

Devices using ____ may cause all-band interference.

How would you solve a near/far transmission problem?

The Default IP Address and Default IP Subnet Mask fields are used only when ____ is enabled for the network.

Describe the issue of duplicate SSIDs and why this may cause a wireless device to intermittently disconnect from the AP.

How would you delete the current access point configuration and return all of the settings to the factory default settings on a Cisco Aironet AP?

Describe the LED indicator lights that appear on an AP.