Question 1

Feature of iEEE 802.15.3 is

Accepted Answer

A) low data rate and low power 
B) high data rate and high power 
C) high data rate and low power 
D) low data rate and high power 
A) low data rate and low power 
B) high data rate and high power 
C) high data rate and low power 
D) low data rate and high power C

Question 2

In case of Z wave network, ______ node has complete map and calculate routes

Accepted Answer

A) routing slaves 
B) controllers 
C) slaves 
D) a and b both 
A) routing slaves 
B) controllers 
C) slaves 
D) a and b both B

Question 3

iEEE 802.15.4 ANT presents a data rate of

Accepted Answer

A) 10 kbit/sec 
B) 100 kbit/sec 
C) 1 mbit/sec 
D) 250 kbit/sec 
A) 10 kbit/sec 
B) 100 kbit/sec 
C) 1 mbit/sec 
D) 250 kbit/sec C

Question 4

WirelessHART   is stands for

Accepted Answer

A) high area remote transducer protocol 
B) highway area remote transducer protocol 
C) highway addressable remote transducer protocol 
D) higher address remote transfer protocol 
A) high area remote transducer protocol 
B) highway area remote transducer protocol 
C) highway addressable remote transducer protocol 
D) higher address remote transfer protocol

Question 5

As the energy used in transmission ___________, the probability of error ___________, and the number of retransmissions _________.

Accepted Answer

A) increases, decreases, increases 
B) decreases, decreases, increases 
C) decreases, decreases, decreases 
D) increases, decreases, decreases 
A) increases, decreases, increases 
B) decreases, decreases, increases 
C) decreases, decreases, decreases 
D) increases, decreases, decreases

Question 6

In case of Z wave network, ______ node can act as repeater.

Accepted Answer

A) routing slaves 
B) controllers 
C) slaves 
D) a and b both 
A) routing slaves 
B) controllers 
C) slaves 
D) a and b both

Question 7

Wireless HART communication protocol able to work on distances up to ____________

Accepted Answer

A) 100 m 
B) 1500 m 
C) 50 m 
D) 500 m 
A) 100 m 
B) 1500 m 
C) 50 m 
D) 500 m

Question 8

ISA100.11a protocol stack includes following layers:

Accepted Answer

A) physical layer, data link layer, network layer and transport layer. 
B) physical layer, data link layer, network layer, transport layer and application layer. 
C) data link layer, network layer, transport layer and application layer. 
D) physical layer, data link layer, network layer and application layer. 
A) physical layer, data link layer, network layer and transport layer. 
B) physical layer, data link layer, network layer, transport layer and application layer. 
C) data link layer, network layer, transport layer and application layer. 
D) physical layer, data link layer, network layer and application layer.

Question 9

A Z-Wave network can consist of ____________ nodes to the max.

Accepted Answer

A) 121 
B) 232 
C) 10 
D) 64 
A) 121 
B) 232 
C) 10 
D) 64

Question 10

FSK modulation technique is used in ______- standard.

Accepted Answer

A) wavenis 
B) insteon 
C) zigbee 
D) bluetooth 
A) wavenis 
B) insteon 
C) zigbee 
D) bluetooth

Question 11

The objective of the cross-layer protocol in WSN is

Accepted Answer

A) highly reliable communication with minimal energy consumption 
B) adaptive communication decisions 
C) local congestion avoidance. 
D) all of the bove 
A) highly reliable communication with minimal energy consumption 
B) adaptive communication decisions 
C) local congestion avoidance. 
D) all of the bove

Question 12

Wireless Technology having bandwidth of 250 Kbps is

Accepted Answer

A) zigbee 
B) wi-fi 
C) bluetooth 
D) none of above 
A) zigbee 
B) wi-fi 
C) bluetooth 
D) none of above

Question 13

Z-Wave uses a ______ bit identifier

Accepted Answer

A) 16 
B) 8 
C) 32 
D) 24 
A) 16 
B) 8 
C) 32 
D) 24

Question 14

ISA100.11a is a wireless networking technology standard where ISA stands for

Accepted Answer

A) international security addressing 
B) international society of addressing 
C) international society of automation 
D) international security for automation 
A) international security addressing 
B) international society of addressing 
C) international society of automation 
D) international security for automation

Question 15

At the physical layer, contribute to energy loss in a wireless transmission, the loss is

Accepted Answer

A) due to the channel and the fixed energy cost 
B) due to run of the transmission and reception circuitry 
C) both 
D) neither a nor b 
A) due to the channel and the fixed energy cost 
B) due to run of the transmission and reception circuitry 
C) both 
D) neither a nor b

Question 16

Wireless Technology having bandwidth of 1 Mbps is

Accepted Answer

A) zigbee 
B) wi-fi 
C) bluetooth 
D) none of above 
A) zigbee 
B) wi-fi 
C) bluetooth 
D) none of above

Question 17

Function of MAC layer in ZigBee alliance is

Accepted Answer

A) modulation and demodulation 
B) transmits the beacon frames 
C) end device connection and disconnection 
D) network setup 
A) modulation and demodulation 
B) transmits the beacon frames 
C) end device connection and disconnection 
D) network setup

Question 18

_________ provides IP communication capability to nodes in WSN.

Accepted Answer

A) isa100.11a 
B) zigbee 
C) 6lowpan 
D) bluetooth 
A) isa100.11a 
B) zigbee 
C) 6lowpan 
D) bluetooth

Question 19

Wibree Nokia's short-range wireless connection which is similar and compatible to Bluetooth is

Accepted Answer

A) equally energy efficient as bluetooth 
B) less energy efficient than bluetooth 
C) more energy efficient than bluetooth 
D) cannot relate energy efficiency 
A) equally energy efficient as bluetooth 
B) less energy efficient than bluetooth 
C) more energy efficient than bluetooth 
D) cannot relate energy efficiency

Question 20

Type of ZigBee participate in multi-hop routing of message is

Accepted Answer

A) zigbee coordinator 
B) zigbee router 
C) zigbee end device 
D) a and b both 
A) zigbee coordinator 
B) zigbee router 
C) zigbee end device 
D) a and b both

Feature of iEEE 802.15.3 is

In case of Z wave network, ______ node has complete map and calculate routes

iEEE 802.15.4 ANT presents a data rate of

WirelessHART is stands for

As the energy used in transmission _____, the probability of error _, and the number of retransmissions _____.

In case of Z wave network, ______ node can act as repeater.

Wireless HART communication protocol able to work on distances up to ____________

ISA100.11a protocol stack includes following layers:

A Z-Wave network can consist of ____________ nodes to the max.

FSK modulation technique is used in ______- standard.

The objective of the cross-layer protocol in WSN is

Wireless Technology having bandwidth of 250 Kbps is

Z-Wave uses a ______ bit identifier

ISA100.11a is a wireless networking technology standard where ISA stands for

At the physical layer, contribute to energy loss in a wireless transmission, the loss is

Wireless Technology having bandwidth of 1 Mbps is

Function of MAC layer in ZigBee alliance is

_________ provides IP communication capability to nodes in WSN.

Wibree Nokia's short-range wireless connection which is similar and compatible to Bluetooth is

Type of ZigBee participate in multi-hop routing of message is

Exploring the Challenges and Applications of Sensor Networks

Wireless Networking and Sensor Networks

Wireless Sensor Network Applications and Challenges

Exploring Different Aspects of Wireless Sensor Networks

Topics on Wireless Sensor Networks and Network Access Protocols

Multiple Access Techniques and Wireless Network Management

Wireless Networking and Radio Communication

Understanding Energy Optimization and Latency in Sensor Networks

Wireless Mac Protocols and Network Topology Control

Wireless Networking and Standards

Mac and PHY Standards and Zigbee Technology

Wireless Communication Technologies and Standards

Network Size, Tracking Capabilities, and Routing Protocols

Routing and Localization in Sensor Networks

Localization and Tracking Methods in Wireless Sensor Networks

Range-Free Localization Techniques and Node Network Terminology

Filters

Exam 12: Wireless Networking Technology and Protocols

Feature of iEEE 802.15.3 is

In case of Z wave network, ______ node has complete map and calculate routes

iEEE 802.15.4 ANT presents a data rate of

WirelessHART is stands for

As the energy used in transmission ___________, the probability of error ___________, and the number of retransmissions _________.

In case of Z wave network, ______ node can act as repeater.

Wireless HART communication protocol able to work on distances up to ____________

ISA100.11a protocol stack includes following layers:

A Z-Wave network can consist of ____________ nodes to the max.

FSK modulation technique is used in ______- standard.

The objective of the cross-layer protocol in WSN is

Wireless Technology having bandwidth of 250 Kbps is

Z-Wave uses a ______ bit identifier

ISA100.11a is a wireless networking technology standard where ISA stands for

At the physical layer, contribute to energy loss in a wireless transmission, the loss is

Wireless Technology having bandwidth of 1 Mbps is

Function of MAC layer in ZigBee alliance is

_________ provides IP communication capability to nodes in WSN.

Wibree Nokia's short-range wireless connection which is similar and compatible to Bluetooth is

Type of ZigBee participate in multi-hop routing of message is

Exploring the Challenges and Applications of Sensor Networks

Wireless Networking and Sensor Networks

Wireless Sensor Network Applications and Challenges

Exploring Different Aspects of Wireless Sensor Networks

Topics on Wireless Sensor Networks and Network Access Protocols

Multiple Access Techniques and Wireless Network Management

Wireless Networking and Radio Communication

Understanding Energy Optimization and Latency in Sensor Networks

Wireless Mac Protocols and Network Topology Control

Wireless Networking and Standards

Mac and PHY Standards and Zigbee Technology

Wireless Communication Technologies and Standards

Network Size, Tracking Capabilities, and Routing Protocols

Routing and Localization in Sensor Networks

Localization and Tracking Methods in Wireless Sensor Networks

Range-Free Localization Techniques and Node Network Terminology

Filters

As the energy used in transmission _____, the probability of error _, and the number of retransmissions _____.