Question 1

Which of the following commands is used to configure a switch to use DNS to resolve a name to a matching IP address?

Accepted Answer

A)  ip address ip-address mask 
B)  no shutdown 
C)  ip default-gateway ip-address 
D)  ip name-server ip-address1 ip-address2 … 
A)  ip address ip-address mask 
B)  no shutdown 
C)  ip default-gateway ip-address 
D)  ip name-server ip-address1 ip-address2 … D

Question 2

Which Cisco IOS command is used to display local interface (not server) DHCP IPv4 assignment information?

Accepted Answer

A)  show ip dhcp lease 
B)  show dhcp lease 
C)  show ip dhcp binding 
D)  show dhcp ip binding 
A)  show ip dhcp lease 
B)  show dhcp lease 
C)  show ip dhcp binding 
D)  show dhcp ip binding B

Question 3

Which command can be used to alter the default display behavior of syslog messages on a device so that they will not interrupt the output of a show command?

Accepted Answer

A)  logging timed 
B)  synchronize messages 
C)  logging systematic 
D)  logging synchronous 
A)  logging timed 
B)  synchronize messages 
C)  logging systematic 
D)  logging synchronous D

Question 4

Which of the following commands in configuration mode will enable the VLAN interface if it is not already enabled?

Accepted Answer

A)  ip address ip-address mask 
B)  no shutdown 
C)  ip default-gateway ip-address 
D)  ip name-server ip-address1 ip-address2 … 
A)  ip address ip-address mask 
B)  no shutdown 
C)  ip default-gateway ip-address 
D)  ip name-server ip-address1 ip-address2 …

Question 5

What is the name used to identify a virtual NIC type of device that exists on Cisco switches to assign IP information to specific VLANs?

Accepted Answer

A)  SVC 
B)  PVC 
C)  VRF 
D)  SVI 
A)  SVC 
B)  PVC 
C)  VRF 
D)  SVI

Question 6

Which of the following commands should immediately follow interface vlan 1 when configuring IPv4 on a switch?

Accepted Answer

A)  ip address ip-address mask 
B)  no shutdown 
C)  ip default-gateway ip-address 
D)  ip name-server ip-address1 ip-address2 … 
A)  ip address ip-address mask 
B)  no shutdown 
C)  ip default-gateway ip-address 
D)  ip name-server ip-address1 ip-address2 …

Question 7

Which of the following commands should be done as a precursor to generating a matched public and private key for encryption?

Accepted Answer

A)  hostname name 
B)  ip domain-name name 
C)  crypto key prepare rsa 
D)  ip ssh version 2 
A)  hostname name 
B)  ip domain-name name 
C)  crypto key prepare rsa 
D)  ip ssh version 2

Question 8

Which of the following protocols are enabled by default on a Cisco router for external users to access?

Accepted Answer

A)  Telnet 
B)  SSH 
C)  Both Telnet and SSH 
D)  Neither Telnet nor SSH 
A)  Telnet 
B)  SSH 
C)  Both Telnet and SSH 
D)  Neither Telnet nor SSH

Question 9

How many VLAN interfaces (SVI) can exist and be up on a typical Layer 2 Cisco switch at the same time?

Accepted Answer

A)  1 
B)  8 
C)  2 
D)  4096 
A)  1 
B)  8 
C)  2 
D)  4096

Question 10

Which of the following is a characteristic of the shared passwords used in networking?

Accepted Answer

A)  The individual user defines each password. 
B)  Every piece of equipment must use the same password. 
C)  All configuration modes use the same password. 
D)  The password is set and known by administrators. 
A)  The individual user defines each password. 
B)  Every piece of equipment must use the same password. 
C)  All configuration modes use the same password. 
D)  The password is set and known by administrators.

Question 11

Which of the following transport input commands will configure a port to support both Telnet and SSH?

Accepted Answer

A)  transport input all 
B)  transport input telnet ssh 
C)  transport input both 
D)  transport input default 
A)  transport input all 
B)  transport input telnet ssh 
C)  transport input both 
D)  transport input default

Question 12

Which of the following commands are shared between the console and Telnet for the setup of simple passwords?

Accepted Answer

A)  line con 0 
B)  login 
C)  password password-value 
D)  line vty 0 15 
A)  line con 0 
B)  login 
C)  password password-value 
D)  line vty 0 15

Question 13

Which of the following commands should be used to force the use of username/password combinations stored on the local switch for both the console and Telnet?

Accepted Answer

A)  line con 0 
B)  username name secret password 
C)  login local 
D)  no password 
A)  line con 0 
B)  username name secret password 
C)  login local 
D)  no password

Question 14

Which of the following commands is used to initiate the configuration mode to set a password for Telnet?

Accepted Answer

A)  line con 0 
B)  login 
C)  password password-value 
D)  line vty 0 15 
A)  line con 0 
B)  login 
C)  password password-value 
D)  line vty 0 15

Question 15

Which of the following commands is used to enable console password security using a simple password?

Accepted Answer

A)  line con 0 
B)  login 
C)  password password-value 
D)  line vty 0 15 
A)  line con 0 
B)  login 
C)  password password-value 
D)  line vty 0 15

Exam 6: Configuring Basic Switch Management

Which of the following commands is used to configure a switch to use DNS to resolve a name to a matching IP address?

Which Cisco IOS command is used to display local interface (not server) DHCP IPv4 assignment information?

Which command can be used to alter the default display behavior of syslog messages on a device so that they will not interrupt the output of a show command?

Which of the following commands in configuration mode will enable the VLAN interface if it is not already enabled?

What is the name used to identify a virtual NIC type of device that exists on Cisco switches to assign IP information to specific VLANs?

Which of the following commands should immediately follow interface vlan 1 when configuring IPv4 on a switch?

Which of the following commands should be done as a precursor to generating a matched public and private key for encryption?

Which of the following protocols are enabled by default on a Cisco router for external users to access?

How many VLAN interfaces (SVI) can exist and be up on a typical Layer 2 Cisco switch at the same time?

Which of the following is a characteristic of the shared passwords used in networking?

Which of the following transport input commands will configure a port to support both Telnet and SSH?

Which of the following commands are shared between the console and Telnet for the setup of simple passwords?

Which of the following commands should be used to force the use of username/password combinations stored on the local switch for both the console and Telnet?

Which of the following commands is used to initiate the configuration mode to set a password for Telnet?

Which of the following commands is used to enable console password security using a simple password?

Introduction to TCP/IP Networking

Fundamentals of Ethernet Lans

Fundamentals of Wans and IP Routing

Using the Command-Line Interface

Analyzing Ethernet Lan Switching

Configuring and Verifying Switch Interfaces

Implementing Ethernet Virtual Lans

Spanning Tree Protocol Concepts

RSTP and Etherchannel Configuration

Perspectives on IPV4 Subnetting

Analyzing Classful IPV4 Networks

Analyzing Subnet Masks

Analyzing Existing Subnets

Operating Cisco Routers

Configuring IPV4 Addresses and Static Routes

IP Routing in the Lan

Troubleshooting IPV4 Routing

Understanding OSPF Concepts

Implementing OSPF

OSPF Network Types and Neighbors

Fundamentals of IP Version 6

Ipv6 Addressing and Subnetting

Implementing IPV6 Addressing on Routers

Implementing IPV6 Routing

Fundamentals of Wireless Networks

Analyzing Cisco Wireless Architectures

Securing Wireless Networks

Building a Wireless Lan

Filters