Exam 4: Introduction to TCP/IP Protocols
Exam 1: An Introduction to Networking50 Questions
Exam 2: Network Standards and the OSI Model50 Questions
Exam 3: Transmission Basics and Networking Media50 Questions
Exam 4: Introduction to TCP/IP Protocols50 Questions
Exam 5: Topologies and Ethernet Standards48 Questions
Exam 6: Network Hardware50 Questions
Exam 7: WANs and Remote Connectivity50 Questions
Exam 8: Wireless Networking50 Questions
Exam 9: Network Operating Systems50 Questions
Exam 10: In-Depth TCP/IP Networking50 Questions
Exam 11: Voice and Video Over IP50 Questions
Exam 12: Network Security50 Questions
Exam 13: Troubleshooting Network Problems50 Questions
Exam 14: Ensuring Integrity and Availability50 Questions
Exam 15: Network Management50 Questions
Select questions type
If the standard port number for the Telnet service is 23,a host whose IPv4 address is 10.43.3.87 has a socket address for Telnet of ____.
Free
(Multiple Choice)
4.8/5
(38)
Correct Answer:
B
MATCHING
Match each item with a statement below:
a.Well Known Ports
f.dotted decimal notation
b.Registered Ports
g.namespace
c.fully qualified host name
h.host file
d.resolvers
i.Dynamic Ports
e.DNS
-The most common way of expressing IP addresses.
Free
(Short Answer)
4.7/5
(35)
Correct Answer:
F
In most cases,BOOTP has been surpassed by the more sophisticated IP addressing utility,____.
Free
(Multiple Choice)
4.9/5
(31)
Correct Answer:
C
ICMP (Internet Control Message Protocol)reports on the success or failure of data delivery.
(True/False)
4.9/5
(27)
The command used to view IP information on a Windows XP or Windows Vista workstation is ifconfig.
(True/False)
4.8/5
(34)
Protocols that can span more than one LAN (or LAN segment)are ____________________,because they carry Network layer addressing information that can be interpreted by a router.
(Short Answer)
4.7/5
(42)
____ is a simple Application layer protocol used to synchronize the clocks of computers on a network.
(Multiple Choice)
4.8/5
(34)
____________________ is a process of subdividing a single class of networks into multiple,smaller logical networks,or segments.
(Short Answer)
4.8/5
(30)
In the TCP/IP protocol suite,____ is the core protocol responsible for logical addressing.
(Multiple Choice)
4.8/5
(33)
MATCHING
Match each item with a statement below:
a.Well Known Ports
f.dotted decimal notation
b.Registered Ports
g.namespace
c.fully qualified host name
h.host file
d.resolvers
i.Dynamic Ports
e.DNS
-Any hosts on the Internet that need to look up domain name information.
(Short Answer)
4.8/5
(43)
____ is a terminal emulation protocol used to log on to remote hosts using the TCP/IP protocol suite.
(Multiple Choice)
4.8/5
(32)
In dotted decimal notation,a(n)____ separates each decimal.
(Multiple Choice)
4.9/5
(40)
A(n)____________________ is a special 32-bit number that,when combined with a device's IP address,informs the rest of the network about the segment or network to which the device is attached.
(Short Answer)
4.9/5
(29)
In IPv4 addressing,a node with an IP address of 168.34.88.29 belongs to a Class ____ network.
(Multiple Choice)
4.8/5
(39)
____ is a utility that can verify that TCP/IP is installed,bound to the NIC,configured correctly,and communicating with the network.
(Multiple Choice)
4.8/5
(40)
If your network does not need or use APIPA,it must be uninstalled to avoid conflicts.
(True/False)
4.8/5
(30)
Showing 1 - 20 of 50
Filters
- Essay(0)
- Multiple Choice(0)
- Short Answer(0)
- True False(0)
- Matching(0)