Question 1

Which of the following is connected inline to each end device and adds power to the line?

Accepted Answer

A)  midspan device 
B)  power sourcing equipment 
C)  SoftAP 
D)  EEG 
A)  midspan device 
B)  power sourcing equipment 
C)  SoftAP 
D)  EEG

Question 2

Describe a PoE injector.

Accepted Answer

PoE injector is a small, inexpensive dev

Question 3

____________________ ensure that devices from one vendor will function with those from other vendors.

Accepted Answer

The answer of ____________________ ensure that devices from one vendor...

Question 4

What is a gateway and what types of gateways do you find in wireless networks?

Accepted Answer

A gateway is a network device

Question 5

A directed transmission requires a line of sight path from emitter to detector.

Accepted Answer

A) True 
 B)False

Question 6

If a remote wireless bridge is in repeater mode it functions as a standard AP only and does not communicate with other remote wireless bridges.

Accepted Answer

A) True 
 B)False

Question 7

Which of the following is NOT a major part of an autonomous access point?

Accepted Answer

A)  antenna 
B)  wired network interface 
C)  bridging software 
D)  wireless switch 
A)  antenna 
B)  wired network interface 
C)  bridging software 
D)  wireless switch

Question 8

Which of the following statements is true about the 802.11g standard?

Accepted Answer

A)  speeds up to 600 Mbps and same radio frequency as 802.11a 
B)  speeds up to 54 Mbps and same radio frequency as 802.11b 
C)  speeds up to 11 Mbps and same radio frequency as 802.11c 
D)  speeds up to 54 Mbps and same radio frequency as 802.11a 
A)  speeds up to 600 Mbps and same radio frequency as 802.11a 
B)  speeds up to 54 Mbps and same radio frequency as 802.11b 
C)  speeds up to 11 Mbps and same radio frequency as 802.11c 
D)  speeds up to 54 Mbps and same radio frequency as 802.11a

Question 9

The IEEE ____________________ standard specified that wireless transmissions could occur via infrared light or radio waves.

Accepted Answer

The answer of The IEEE ____________________ standard specified that wireless...

Question 10

Which of the following typically resides between the wireless network and the wired network,serving as the entry point to the wired network while providing encryption and authentication services?

Accepted Answer

A)  residential WLAN gateway 
B)  point-to-multipoint remote wireless bridge 
C)  enterprise encryption gateway 
D)  point-to-point authenticating bridge 
A)  residential WLAN gateway 
B)  point-to-multipoint remote wireless bridge 
C)  enterprise encryption gateway 
D)  point-to-point authenticating bridge

Question 11

Remote wireless ____________________ can connect sites such as satellite offices,remote campus settings,or temporary office locations when the sites are separated by obstacles such as bodies of water,freeways,or railroads that make using a wired connection impractical or very expensive.

Accepted Answer

The answer of Remote wireless ____________________ can connect sites such...

Question 12

Which of the following are modes in which a remote wireless bridge can function? (Choose all that apply.)

Accepted Answer

A) switching mode 
B) nonroot mode 
C) routing mode 
D) repeater mode 
A) switching mode 
B) nonroot mode 
C) routing mode 
D) repeater mode

Question 13

If you are installing an access point on a ceiling,but find there are no electrical outlets nearby to provide power to the AP,what technology should you deploy?

Accepted Answer

A)  WCN 
B)  SoftAP 
C)  POE 
D)  Virtual Wifi 
A)  WCN 
B)  SoftAP 
C)  POE 
D)  Virtual Wifi

Question 14

The IEEE 802.11g standard requires the strongest level of wireless security.

Accepted Answer

A) True 
 B)False

Question 15

Which of the following is a viable option for a large enterprise or campus wireless network?

Accepted Answer

A)  autonomous access point 
B)  lightweight access point 
C)  fat access point 
D)  Soft access point 
A)  autonomous access point 
B)  lightweight access point 
C)  fat access point 
D)  Soft access point

Question 16

What are the two functions of an access point?

Accepted Answer

First, the access point acts as the base

Question 17

Which of the following are differences between a remote wireless bridge and an AP? (Choose all that apply.)

Accepted Answer

A) remote wireless bridges have increased power 
B) remote wireless bridges have a directional antenna 
C) remote wireless bridges provides encryption 
D) remote wireless bridges only connect devices in close proximity 
A) remote wireless bridges have increased power 
B) remote wireless bridges have a directional antenna 
C) remote wireless bridges provides encryption 
D) remote wireless bridges only connect devices in close proximity

Question 18

Match between columns
                        Premises: a network of wireless mesh access points that communicate between themselves
term used to refer to a wireless bridge operating in root mode
a mode of a wireless bridge that allows the bridge to extend the distance between buildings
a device that transmits a signal and is used in an IEEE 802.11 infrared network
mode of a wireless bridge in which the bridge can transmit only to a wireless bridge that is in root mode
an infrared wireless transmission that requires that the emitter and detector be directly aimed at one another
a term used to refer to the size and shape of a device
a small and inexpensive device that can inject power into an Ethernet cable
device that contains the management and configuration functions for a lightweight access point

Accepted Answer

The Answer of emitter and wireless switch and repeater mode is...

Question 19

A ____________________ access point does not have to be individually connected by a cable to the wired network but can communicate with other access points of the same type to reach the wired connection.

Accepted Answer

The answer of A ____________________ access point does not have...

Question 20

What are the two components that make up the Windows 7 wireless Hosted Network function?

Accepted Answer

A)  Windows Connect Now,SoftAP 
B)  Virtual Wifi,SoftAP 
C)  Virtual WiFi,ICS 
D)  ICS,WCN 
A)  Windows Connect Now,SoftAP 
B)  Virtual Wifi,SoftAP 
C)  Virtual WiFi,ICS 
D)  ICS,WCN

Which of the following is connected inline to each end device and adds power to the line?

Describe a PoE injector.

____________________ ensure that devices from one vendor will function with those from other vendors.

What is a gateway and what types of gateways do you find in wireless networks?

A directed transmission requires a line of sight path from emitter to detector.

If a remote wireless bridge is in repeater mode it functions as a standard AP only and does not communicate with other remote wireless bridges.

Which of the following is NOT a major part of an autonomous access point?

Which of the following statements is true about the 802.11g standard?

The IEEE ____________________ standard specified that wireless transmissions could occur via infrared light or radio waves.

Which of the following typically resides between the wireless network and the wired network,serving as the entry point to the wired network while providing encryption and authentication services?

Remote wireless ____________________ can connect sites such as satellite offices,remote campus settings,or temporary office locations when the sites are separated by obstacles such as bodies of water,freeways,or railroads that make using a wired connection impractical or very expensive.

Which of the following are modes in which a remote wireless bridge can function? (Choose all that apply.)

If you are installing an access point on a ceiling,but find there are no electrical outlets nearby to provide power to the AP,what technology should you deploy?

The IEEE 802.11g standard requires the strongest level of wireless security.

Which of the following is a viable option for a large enterprise or campus wireless network?

What are the two functions of an access point?

Which of the following are differences between a remote wireless bridge and an AP? (Choose all that apply.)

A ____________________ access point does not have to be individually connected by a cable to the wired network but can communicate with other access points of the same type to reach the wired connection.

What are the two components that make up the Windows 7 wireless Hosted Network function?

The World of Wireless

Radio Frequency Fundamentals

Antennas

Physical Layer Standards

Medium Access Control Layer Standards

WLAN Management and Architectures

Conducting a Site Survey

Wireless LAN Security Vulnerabilities

Implementing Wireless LAN Security

Managing a Wireless LAN

Wireless Network Troubleshooting and Optimization

Other Wireless Networks

Filters

Exam 2: Wireless Local Area Networks

Which of the following is connected inline to each end device and adds power to the line?

Describe a PoE injector.

____________________ ensure that devices from one vendor will function with those from other vendors.

What is a gateway and what types of gateways do you find in wireless networks?

A directed transmission requires a line of sight path from emitter to detector.

If a remote wireless bridge is in repeater mode it functions as a standard AP only and does not communicate with other remote wireless bridges.

Which of the following is NOT a major part of an autonomous access point?

Which of the following statements is true about the 802.11g standard?

The IEEE ____________________ standard specified that wireless transmissions could occur via infrared light or radio waves.

Which of the following typically resides between the wireless network and the wired network,serving as the entry point to the wired network while providing encryption and authentication services?

Remote wireless ____________________ can connect sites such as satellite offices,remote campus settings,or temporary office locations when the sites are separated by obstacles such as bodies of water,freeways,or railroads that make using a wired connection impractical or very expensive.

Which of the following are modes in which a remote wireless bridge can function? (Choose all that apply.)

If you are installing an access point on a ceiling,but find there are no electrical outlets nearby to provide power to the AP,what technology should you deploy?

The IEEE 802.11g standard requires the strongest level of wireless security.

Which of the following is a viable option for a large enterprise or campus wireless network?

What are the two functions of an access point?

Which of the following are differences between a remote wireless bridge and an AP? (Choose all that apply.)

A ____________________ access point does not have to be individually connected by a cable to the wired network but can communicate with other access points of the same type to reach the wired connection.

What are the two components that make up the Windows 7 wireless Hosted Network function?

The World of Wireless

Radio Frequency Fundamentals

Antennas

Physical Layer Standards

Medium Access Control Layer Standards

WLAN Management and Architectures

Conducting a Site Survey

Wireless LAN Security Vulnerabilities

Implementing Wireless LAN Security

Managing a Wireless LAN

Wireless Network Troubleshooting and Optimization

Other Wireless Networks

Filters