Question 1

The FIFO method is a more accurate method than weighted average because:

Accepted Answer

A)  it does not require the calculation of equivalent units. 
B)  the costs of current period are not combined with the costs of the prior period. 
C)  it considers prior period costs during the current period. 
D)  it must be computerised in order to obtain accurate calculations. 
A)  it does not require the calculation of equivalent units. 
B)  the costs of current period are not combined with the costs of the prior period. 
C)  it considers prior period costs during the current period. 
D)  it must be computerised in order to obtain accurate calculations.

Question 2

Wages paid to a supervisor in a factory are a part of:

Accepted Answer

A)    
B)    
C)    
D)    
A)    
B)    
C)    
D)

Question 3

Which of the following statement/s is/are true?

Accepted Answer

A)  Weighted average costs provide a better basis for cost control than FIFO costs. 
B)  Weighted average costs provide a better basis for performance evaluation than standard costs. 
C)  Cost per equivalent unit provides a measure of production efficiency. 
D)  Weighted average costs provide a better basis for cost control than FIFO costs AND cost per equivalent unit provides a measure of production efficiency. 
A)  Weighted average costs provide a better basis for cost control than FIFO costs. 
B)  Weighted average costs provide a better basis for performance evaluation than standard costs. 
C)  Cost per equivalent unit provides a measure of production efficiency. 
D)  Weighted average costs provide a better basis for cost control than FIFO costs AND cost per equivalent unit provides a measure of production efficiency.

Question 4

A company starts work on 1000 physical units and completes 75 per cent of conversion activity. The costs are $1500 for conversion and $5000 for direct material. What is the cost per equivalent unit for direct material?

Accepted Answer

A)  $10.00 per unit 
B)  $5.00 per unit 
C)  $6.00 per unit 
D)  $6.67 per unit 
A)  $10.00 per unit 
B)  $5.00 per unit 
C)  $6.00 per unit 
D)  $6.67 per unit

Question 5

Owl's Hours produces herbal tea and prides itself in having one of the largest ranges of herbal teas in Australia. It sells more than 50 varieties of tea leaves with a wide range of prices (depending on where the tea leaves are grown). The production processes of its products is simple, but vary depending on whether the tea is sold as loose leaves (which requires packing tea leaves in various sized boxes) or tea bags (which requires additional process in packaging tea in specially designed tea bags). Owl's Hours decides to use an operation costing system. This decision is

Accepted Answer

A)  correct, because the company uses a large variety of tea leaves as direct materials and yet has simple production processes. 
B)  correct, because the company uses a large variety of tea leaves as direct materials and the different products require different sequences of processes. 
C)  incorrect, because the different production lines require the tea leaves to be packaged in very distinctive methods. 
D)  incorrect, because the company has a very homogenous product - it produces and sells only tea. 
A)  correct, because the company uses a large variety of tea leaves as direct materials and yet has simple production processes. 
B)  correct, because the company uses a large variety of tea leaves as direct materials and the different products require different sequences of processes. 
C)  incorrect, because the different production lines require the tea leaves to be packaged in very distinctive methods. 
D)  incorrect, because the company has a very homogenous product - it produces and sells only tea.

Question 6

To calculate equivalent units, multiply the partially completed physical units in the process by the percentage of completion.

Accepted Answer

A) True 
 B)False

Question 7

Which of the following statements about operation costing is true?
i. Conversion costs are accumulated by department.
ii. Direct material costs are accumulated by batch.
iii. It is a hybrid product costing system.

Accepted Answer

A)  i, ii and iii 
B)  ii and iii 
C)  i and iii 
D)  i and ii 
A)  i, ii and iii 
B)  ii and iii 
C)  i and iii 
D)  i and ii

Question 8

Under Australian accounting standards, which methods can be used to prepare the departmental production report?

Accepted Answer

A)  Weighted average, first in first out and standard costing 
B)  Last in first out, first in first out and standard costing 
C)  Last in first out, standard costing, weighted average 
D)  First in first out, last in first out, weighted average and standard costing 
A)  Weighted average, first in first out and standard costing 
B)  Last in first out, first in first out and standard costing 
C)  Last in first out, standard costing, weighted average 
D)  First in first out, last in first out, weighted average and standard costing

Question 9

Which of the following is not required when calculating the equivalent units for conversion?
I Percentage of conversion for ending work in progress
Ii Percentage of conversion for physical units that have been completed and transferred out of the department
Iii) Cost of direct materials

Accepted Answer

A)  i only 
B)  i and ii 
C)  i, ii and iii 
D)  i and iii 
A)  i only 
B)  i and ii 
C)  i, ii and iii 
D)  i and iii

Question 10

Banana Shirts produces t-shirts in large batches. Most of its t-shirts are made of regular cotton, although some are made from ethically produced cotton. The manufacturing process is relatively simple; most t-shirts go through similar processes; the main difference is whether the t-shirt requires embroidery or printing. The most appropriate costing system for Banana Shirts is

Accepted Answer

A)  process costing system. 
B)  job costing system. 
C)  operation costing systems. 
D)  both job costing system and operation costing system are appropriate. 
A)  process costing system. 
B)  job costing system. 
C)  operation costing systems. 
D)  both job costing system and operation costing system are appropriate.

Question 11

Standard costs are based on estimates of cost of materials, labour and overheads. Standard costs are also known as

Accepted Answer

A)  actual costs. 
B)  forecasted costs. 
C)  expected costs. 
D)  budgeted costs. 
A)  actual costs. 
B)  forecasted costs. 
C)  expected costs. 
D)  budgeted costs.

Question 12

Rex Company Ltd had 4000 units in work in process at 1 April. During April, 11 000 units were completed. At 30 April, 5000 units remained in work in process. How many units were started during April?

Accepted Answer

A)  11 000 
B)  5000 
C)  12 000 
D)  16 000 
A)  11 000 
B)  5000 
C)  12 000 
D)  16 000

Question 13

For a firm, which produces its product through two processes, the costs transferred into Process 2 from Process 1 can be described as

Accepted Answer

A)  prior process costs. 
B)  transferred in costs. 
C)  prior period costs. 
D)  prior process costs AND transferred in costs. 
A)  prior process costs. 
B)  transferred in costs. 
C)  prior period costs. 
D)  prior process costs AND transferred in costs.

Question 14

Assume material is added at the beginning of a process, and the beginning WIP inventory is 30 per cent complete as to conversion costs. Using the FIFO method of costing, the total equivalent units for material for this process during this period is equal to

Accepted Answer

A)  units started this period in this process. 
B)  units started this period in this process plus 70 per cent of beginning inventory. 
C)  beginning inventory this period for the process. 
D)  units started this period in this process plus the beginning inventory. 
A)  units started this period in this process. 
B)  units started this period in this process plus 70 per cent of beginning inventory. 
C)  beginning inventory this period for the process. 
D)  units started this period in this process plus the beginning inventory.

Question 15

In which of the following ways is normal spoilage accounted for?

Accepted Answer

A)  Expensed in the period in which it occurred 
B)  Included as part of the unit cost of output 
C)  Written off to cost of goods sold 
D)  Included in inventory valuation until year-end and then written off 
A)  Expensed in the period in which it occurred 
B)  Included as part of the unit cost of output 
C)  Written off to cost of goods sold 
D)  Included in inventory valuation until year-end and then written off

Question 16

Healthy Flavour is a food processing company that makes a product called Health Nut soup in two processes-blending and condensing. The output of the blending department is transferred to the condensing department. All materials are added at the beginning of the blending process, and conversion activity occurs uniformly throughout both processes. The following data pertain to the month of April in the blending department.  
Using the FIFO method of process costing, calculate the cost per equivalent unit of conversion activity for the month of April.

Accepted Answer

A)  $0.5048 
B)  $0.4169 
C)  $0.4381 
D)  None of the given answers 
A)  $0.5048 
B)  $0.4169 
C)  $0.4381 
D)  None of the given answers

Question 17

Softcloth Textile Pty Ltd manufactures a variety of fabrics. The Weaving Department had 1000 units in work in process on April 1, which were 20 per cent complete as to conversion costs. During April, 8000 units were completed and transferred. On April 30, 4000 units remained in work in process 50 per cent complete as to conversion costs. Using the weighted average method process costing, calculate the equivalent units of conversion for the month of April.

Accepted Answer

A)  12 000 
B)  9000 
C)  9800 
D)  10 000 
A)  12 000 
B)  9000 
C)  9800 
D)  10 000

Question 18

At Hilltop Dairy Producers Pty Ltd, an employee ignored the standard sterilising procedures before beginning the new batch of low fat milk causing the batch to curdle. This would be regarded as

Accepted Answer

A)  spoilage. 
B)  normal spoilage. 
C)  expected spoilage. 
D)  abnormal spoilage. 
A)  spoilage. 
B)  normal spoilage. 
C)  expected spoilage. 
D)  abnormal spoilage.

Question 19

Conversion costs are generally added at specific points throughout a process.

Accepted Answer

A) True 
 B)False

Question 20

Eldervale Winery produces premium wine in the Hunter Valley. During the bottling process, small amount of spillage is often unavoidable. How should the costs associated with the spillage be treated?

Accepted Answer

A)  It should be included in the work in progress. 
B)  It should be expensed in the period the cost is incurred. 
C)  It should be ignored in the work in progress account and reported only in the internal production reports. 
D)  It should be expensed immediately under the FIFO method, but included in the work in progress in the weighted average method. 
A)  It should be included in the work in progress. 
B)  It should be expensed in the period the cost is incurred. 
C)  It should be ignored in the work in progress account and reported only in the internal production reports. 
D)  It should be expensed immediately under the FIFO method, but included in the work in progress in the weighted average method.

The FIFO method is a more accurate method than weighted average because:

Wages paid to a supervisor in a factory are a part of:

Which of the following statement/s is/are true?

A company starts work on 1000 physical units and completes 75 per cent of conversion activity. The costs are $1500 for conversion and $5000 for direct material. What is the cost per equivalent unit for direct material?

To calculate equivalent units, multiply the partially completed physical units in the process by the percentage of completion.

Which of the following statements about operation costing is true? i. Conversion costs are accumulated by department. ii. Direct material costs are accumulated by batch. iii. It is a hybrid product costing system.

Under Australian accounting standards, which methods can be used to prepare the departmental production report?

Which of the following is not required when calculating the equivalent units for conversion? I Percentage of conversion for ending work in progress Ii Percentage of conversion for physical units that have been completed and transferred out of the department Iii) Cost of direct materials

Standard costs are based on estimates of cost of materials, labour and overheads. Standard costs are also known as

Rex Company Ltd had 4000 units in work in process at 1 April. During April, 11 000 units were completed. At 30 April, 5000 units remained in work in process. How many units were started during April?

For a firm, which produces its product through two processes, the costs transferred into Process 2 from Process 1 can be described as

Assume material is added at the beginning of a process, and the beginning WIP inventory is 30 per cent complete as to conversion costs. Using the FIFO method of costing, the total equivalent units for material for this process during this period is equal to

In which of the following ways is normal spoilage accounted for?

At Hilltop Dairy Producers Pty Ltd, an employee ignored the standard sterilising procedures before beginning the new batch of low fat milk causing the batch to curdle. This would be regarded as

Conversion costs are generally added at specific points throughout a process.

Eldervale Winery produces premium wine in the Hunter Valley. During the bottling process, small amount of spillage is often unavoidable. How should the costs associated with the spillage be treated?

Management Accounting: Information for Creating Value and Managing Resources

Management Accounting: Cost Terms and Concepts

Cost Behaviour, Cost Drivers and Cost Estimation

Product Costing Systems

Service Costing

A Closer Look at Overhead Costs

Activity-Based Costing

Budgeting Systems

Standard Costs for Control: Direct Material and Direct Labour

Standard Costs for Control: Flexible Budgets and Manufacturing Overhead

Managing and Reporting Performance

Financial Performance Measures and Incentive Schemes

Strategic Performance Measurement Systems

Managing Suppliers and Customers

Managing Costs and Quality

Sustainability and Management Accounting

Cost Volume Profit Analysis

Information for Decisions: Relevant Costs and Benefits

Pricing and Product Mix Decisions

Information for Capital Expenditure Decisions

Filters

Exam 5: Process Costing and Operation Costing

The FIFO method is a more accurate method than weighted average because:

Wages paid to a supervisor in a factory are a part of:

Which of the following statement/s is/are true?

A company starts work on 1000 physical units and completes 75 per cent of conversion activity. The costs are $1500 for conversion and $5000 for direct material. What is the cost per equivalent unit for direct material?

To calculate equivalent units, multiply the partially completed physical units in the process by the percentage of completion.

Which of the following statements about operation costing is true? i. Conversion costs are accumulated by department. ii. Direct material costs are accumulated by batch. iii. It is a hybrid product costing system.

Under Australian accounting standards, which methods can be used to prepare the departmental production report?

Which of the following is not required when calculating the equivalent units for conversion? I Percentage of conversion for ending work in progress Ii Percentage of conversion for physical units that have been completed and transferred out of the department Iii) Cost of direct materials

Standard costs are based on estimates of cost of materials, labour and overheads. Standard costs are also known as

Rex Company Ltd had 4000 units in work in process at 1 April. During April, 11 000 units were completed. At 30 April, 5000 units remained in work in process. How many units were started during April?

For a firm, which produces its product through two processes, the costs transferred into Process 2 from Process 1 can be described as

Assume material is added at the beginning of a process, and the beginning WIP inventory is 30 per cent complete as to conversion costs. Using the FIFO method of costing, the total equivalent units for material for this process during this period is equal to

In which of the following ways is normal spoilage accounted for?

At Hilltop Dairy Producers Pty Ltd, an employee ignored the standard sterilising procedures before beginning the new batch of low fat milk causing the batch to curdle. This would be regarded as

Conversion costs are generally added at specific points throughout a process.

Eldervale Winery produces premium wine in the Hunter Valley. During the bottling process, small amount of spillage is often unavoidable. How should the costs associated with the spillage be treated?

Management Accounting: Information for Creating Value and Managing Resources

Management Accounting: Cost Terms and Concepts

Cost Behaviour, Cost Drivers and Cost Estimation

Product Costing Systems

Service Costing

A Closer Look at Overhead Costs

Activity-Based Costing

Budgeting Systems

Standard Costs for Control: Direct Material and Direct Labour

Standard Costs for Control: Flexible Budgets and Manufacturing Overhead

Managing and Reporting Performance

Financial Performance Measures and Incentive Schemes

Strategic Performance Measurement Systems

Managing Suppliers and Customers

Managing Costs and Quality

Sustainability and Management Accounting

Cost Volume Profit Analysis

Information for Decisions: Relevant Costs and Benefits

Pricing and Product Mix Decisions

Information for Capital Expenditure Decisions

Filters