Question 1

Every IP address configuration requires the use of a subnet mask,and all hosts on the same network must share the same network ID in their IP addresses.​

Accepted Answer

A) True 
 B)False

Question 2

The 169.254.78.9 IP address is an example of what type of IP address?​

Accepted Answer

A)  ​Automatic Private IP Addressing (APIP
A)  
B)  ​Static IP address 
C)  ​DHCP address 
D)  ​IPv6 helper address

Question 3

How can one or more consecutive 0 values be written in an IPv6 address?

Accepted Answer

The answer of How can one or more consecutive 0...

Question 4

What purpose does an anycast IPv6 address fulfill?

Accepted Answer

The answer of What purpose does an anycast IPv6 address...

Question 5

What protocol in the TCP/IP suite provides reliable data transfer between applications at the transport-layer?​

Accepted Answer

A)  ​ARP 
B)  ​UDP 
C)  ​TCP 
D)  ​DHCP

Question 6

Which of the following is a valid IPv6 address?​

Accepted Answer

A)  ​FE80:0:0:9F28::10::1 
B)  ​2001::0:0:0:9:: 
C)  ​2001::1 
D)  ​fe80:0:0:0:18ff::0024:8e5a:60

Question 7

The /release option of the ipconfig command is used to release an IP address back to a DHCP server,if DHCP is used.​

Accepted Answer

A) True 
 B)False

Question 8

Why might an administrator use the "arp -d" command?

Accepted Answer

The answer of Why might an administrator use the "arp...

Question 9

​What command line utility can be used to display the default route,as well as all routing table entries?

Accepted Answer

A)  ​ipconfig 
B)  ​route 
C)  ​show route 
D)  ​net print route

Question 10

What type of IPv6 address specifies a single interface on a device?​

Accepted Answer

A)  ​Multicast address 
B)  ​Broadcast address 
C)  ​Unicast address 
D)  ​Anycast address

Question 11

How are link-local IPv6 addresses used?

Accepted Answer

The answer of How are link-local IPv6 addresses used?...

Question 12

​An administrator working on a Windows Server 2012 R2 Server Core installation needs to disable DHCP all interfaces on the server.What PowerShell command should be used?

Accepted Answer

A)  ​Set-NetIPInterface 
B)  ​Change-NetIPInterface 
C)  ​Set-DHCPClientSettings 
D)  ​Set-NetIf

Question 13

How can an administrator retrieve the IP address settings of a computer using PowerShell?​

Accepted Answer

A)  ​Get-NetIPConfiguration 
B)  ​Show-IPAddr 
C)  ​Get-IPconfig 
D)  ​Show-NIC

Question 14

What command can be used to send test queries to a target DNS server?​

Accepted Answer

A)  nslookup 
B)  ​ping 
C)  ​tracert 
D)  ​route

Question 15

The use of ____________,also known as route aggregation or route summarization,reallocates bits from the network portion of an IP address to the host portion,combining subnets.​

Accepted Answer

The answer of The use of ____________,also known as route...

Question 16

How does a computer determine the network ID based on the IP address and the subnet mask?

Accepted Answer

The answer of How does a computer determine the network...

Question 17

​In CIDR notation,the subnet mask 255.255.255.0 is represented by what prefix?

Accepted Answer

A)  ​/21 
B)  ​/22 
C)  ​/23 
D)  ​/24

Question 18

Which of the following is not a standard component of Teredo tunneling?​

Accepted Answer

A)  ​Teredo client 
B)  ​Teredo server 
C)  ​Teredo proxy 
D)  ​Teredo relay

Exam 9: Configuring Tcp/Ip

Every IP address configuration requires the use of a subnet mask,and all hosts on the same network must share the same network ID in their IP addresses.​

The 169.254.78.9 IP address is an example of what type of IP address?​

How can one or more consecutive 0 values be written in an IPv6 address?

What purpose does an anycast IPv6 address fulfill?

What protocol in the TCP/IP suite provides reliable data transfer between applications at the transport-layer?​

Which of the following is a valid IPv6 address?​

The /release option of the ipconfig command is used to release an IP address back to a DHCP server,if DHCP is used.​

Why might an administrator use the "arp -d" command?

​What command line utility can be used to display the default route,as well as all routing table entries?

What type of IPv6 address specifies a single interface on a device?​

How are link-local IPv6 addresses used?

​An administrator working on a Windows Server 2012 R2 Server Core installation needs to disable DHCP all interfaces on the server.What PowerShell command should be used?

How can an administrator retrieve the IP address settings of a computer using PowerShell?​

What command can be used to send test queries to a target DNS server?​

The use of ____________,also known as route aggregation or route summarization,reallocates bits from the network portion of an IP address to the host portion,combining subnets.​

How does a computer determine the network ID based on the IP address and the subnet mask?

​In CIDR notation,the subnet mask 255.255.255.0 is represented by what prefix?

Which of the following is not a standard component of Teredo tunneling?​

Every IP address configuration requires the use of a subnet mask,and all hosts on the same network must share the same network ID in their IP addresses.

The 169.254.78.9 IP address is an example of what type of IP address?

What protocol in the TCP/IP suite provides reliable data transfer between applications at the transport-layer?

Which of the following is a valid IPv6 address?

The /release option of the ipconfig command is used to release an IP address back to a DHCP server,if DHCP is used.

What command line utility can be used to display the default route,as well as all routing table entries?

What type of IPv6 address specifies a single interface on a device?

An administrator working on a Windows Server 2012 R2 Server Core installation needs to disable DHCP all interfaces on the server.What PowerShell command should be used?

How can an administrator retrieve the IP address settings of a computer using PowerShell?

What command can be used to send test queries to a target DNS server?

The use of ____________,also known as route aggregation or route summarization,reallocates bits from the network portion of an IP address to the host portion,combining subnets.

In CIDR notation,the subnet mask 255.255.255.0 is represented by what prefix?

Which of the following is not a standard component of Teredo tunneling?