Question 1

Where can you find code examples for third-party integrations into HPE OneView?

Accepted Answer

A)  Free Software Foundation 
B)  HPE Software Depot 
C)  HPE Support Center 
D)  GitHub Repository

Question 2

When creating a server profile template in HPE OneView for Synergy, which option must you select to ensure OneView will enforce consistency of local storage configuration in a server profile?

Accepted Answer

A)  Not checked 
B)  Minimum match 
C)  OS version 
D)  Exact match

Question 3

Which type of API is supported by HPE OneView?

Accepted Answer

A)  REST 
B)  SOAP 
C)  JSON 
D)  XML

Question 4

What is the most likely reason for CPU, temperature, or power utilization not being presented in HPE OneView?

Accepted Answer

A)  The agent on the server stopped communicating with HPE OneView. 
B)  The wrong SNMP data was entered into iLO. 
C)  The wrong HPE OneView Advanced License Key was entered. 
D)  The server doesn't have an iLO Advanced License.

Question 5

A customer needs to check whether shared infrastructure and Gen10 servers are aligned with SPPs available in the OneView repositories. Which HPE OneView functionality can be used to fulfill the customer requirement?

Accepted Answer

A)  Firmware Compliance report 
B)  Health Check 
C)  Server Hardware report 
D)  Firmware repository

Question 6

Which feature is provided by HPE OneView for VMware vCenter for servers?

Accepted Answer

A)  vSphere/ESXi image deployment 
B)  create and delete datastores 
C)  configure a Link Aggregation Group 
D)  host to LUN mapping

Question 7

When deploying the HPE OneView virtual appliance in a VMware vSphere ESXi environment, what disk format does HPE recommend you use?

Accepted Answer

A)  Thin Provision 
B)  Full Provision 
C)  Thick Provision Eager Zeroed 
D)  Thick Provision Lazy Zeroed

Question 8

Which action is required to enable automated SAN zoning with HPE OneView 5.x and FC switches?

Accepted Answer

A)  configure MPIO in the host OS 
B)  create a logical FC switch within OneView 
C)  add a supported SAN manager 
D)  enable NPIV on the FC switch ports

Question 9

Which parameter is required in the HTTP header of every single REST API call after successful login?

Accepted Answer

A)  Accept-Charset:{charset} 
B)  If-Match:{eTag} 
C)  Content-Type:{media-type}:{charset} 
D)  auth:{session-token}

Question 10

Which license is required to remotely access the DL server console and event logs?

Accepted Answer

A)  HPE OneView Advanced 
B)  Insight Remote Support 
C)  iLO Amplifier Pack 
D)  Global Dashboard

Question 11

A customer wants to open tickets automatically within ServiceNow from alerts generated within HPE OneView. Which HPE OneView integration will allow the customer to do this?

Accepted Answer

A)  SSH 
B)  REST API 
C)  FTP 
D)  HTTP

Question 12

Which objects can be placed into the rack layout in HPE OneView? (Choose two.)

Accepted Answer

A)  Server 
B)  Composer 
C)  Power Delivery Device 
D)  Frame Link Module 
E)  Image Streamer

Question 13

An SY480 compute module is having issues and needs to have the motherboard replaced. In the interest of time, you decide to move the hard drives to a spare compute module. To prevent losing data, what do you need to do before applying the same profile to the new blade?

Accepted Answer

A)  Ensure that the RAID level is configured for RAID1 then select the "Boot" checkbox in the "Local Storage" section of the Server Profile. 
B)  Select "Create logical drive" in the "Local Storage" section of the Server Profile, then uncheck "Manage integrated storage controller". 
C)  Check "Import existing logical drives" in the "Local Storage" section of the Server Profile. 
D)  Check "Re-initialize" controller on next profile application" in the "Local Storage" section of the Server Profile.

Question 14

When configuring network parameters in HPE OneView for BladeSystem and Synergy compute modules, what is a benefit of using Virtual MAC addresses (vMAC)?

Accepted Answer

A)  A server admin can assign custom MAC addresses to each server. 
B)  An application license can be ported to another server profile. 
C)  A vMAC can be changed to physical MAC if required after deployment. 
D)  If a server fails, a server replacement uses the same MAC address.

Question 15

A customer needs to use the Map view feature in HPE OneView for their managed BladeSystem server environment. Which HPE license is required to display this information?

Accepted Answer

A)  HPE OneView Standard 
B)  HPE OneView Advanced 
C)  HPE Insight Control 
D)  HPE iLO Advanced

Question 16

A server administrator is using REST API to create a session ID in a management application. Which part of the curl command needs to be changed?

Accepted Answer

A)  Login credentials in payload section 
B)  Content-Type in header section 
C)  Uniform Resource Locator (URL) 
D)  GET method

Question 17

Before applying server profiles to a group of servers, what is the first thing you should check?

Accepted Answer

A)  The servers are all the same hardware type. 
B)  The servers have the correct firmware installed. 
C)  The servers are powered down. 
D)  The servers are all Synergy compute modules.

Question 18

Which tool enables you to manage ML/DL systems by receiving alerting, pre-failure alerts, automatic call logging, automatic parts dispatch, and contract/warrant display through integrated Remote Support?

Accepted Answer

A)  HPE InfoSight 
B)  HPE OneView Global Dashboard 
C)  HPE OneView 
D)  HPE Intelligent Management Center

Question 19

You need to troubleshoot your HPE OneView appliance, and HPE support has requested a support dump. What do you need to consider before you create the support dump? (Choose two.)

Accepted Answer

A)  Creating the support dump deletes any previous support dump files. 
B)  By default, the created support dump file will be sent automatically to HPE support. 
C)  Creating the support dump deletes the backup file that exists on HPE OneView. 
D)  By default, all data in the support dump file is not encrypted. 
E)  Creating the support dump can take several hours.

Question 20

An administrator needs to customize the BIOS and local RAID configuration for a collection of HPE ProLiant servers. What should the administrator use to accomplish this task?

Accepted Answer

A)  Smart Start Scripting Toolkit 
B)  Global Dashboard 
C)  server hardware 
D)  Server Profile Template

Exam 10: Building HPE Hybrid IT Solutions