Question 1

Match each statement below with the correct item
-The process of dialing in to a network's private or public access server to gain remote access to the network.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 2

Firewalls are devices that analyze incoming frames and make decisions about how to direct them to their destination.

Accepted Answer

A) True 
 B)False

Question 3

Match each statement below with the correct item
-A connectivity device on data networks that logically subdivides a network into smaller, individual collision domains.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 4

Match each statement below with the correct item
-A connectivity device that operates at the Data Link layer of the OSI model and reads header information to forward packets according to their MAC addresses.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 5

A(n) access node is the point at which a user's traffic enters or exits a carrier's network. _________________________

Accepted Answer

A) True 
 B)False

Question 6

Match each statement below with the correct item
-The time it takes for a router to recognize a best path in the event of a change or outage.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 7

Which device accepts and retransmits signals over the network?

Accepted Answer

The answer of Which device accepts and retransmits signals over...

Question 8

Match each statement below with the correct item
-A communications method in which data transmitted in a continuous stream of bits.

Accepted Answer

A) Bridge 
B) Synchronous 
C) Static routing 
D) Hop 
E) Convergence time
F)Dial-up networking
G)USB
H)Bus
I)Translational bridging
J)Switch

Question 9

A bridging technique in which a bridge polls the network to determine a packet's best path between nodes, is referred to as:

Accepted Answer

A)  Translational bridging 
B)  Source-route bridging 
C)  Translational bridging . 
D)  Transparent bridging.

Question 10

A(n) integrated access device is an opening on a computer's systems board that contains multiple electrical contacts into which the expansion board can be inserted. _________________________

Accepted Answer

A) True 
 B)False

Question 11

What term is used to describe a hub that possesses processing capabilities and can therefore monitor network traffic, detect packet errors and collisions, and poll connected devices for information?

Accepted Answer

The answer of What term is used to describe a...

Question 12

Does the term modular router refer to a device that enables a workstation to connect to the network and communicate with other computers?

Accepted Answer

A) True 
 B)False

Exam 11: Data Network Connectivity

Match each statement below with the correct item -The process of dialing in to a network's private or public access server to gain remote access to the network.

Firewalls are devices that analyze incoming frames and make decisions about how to direct them to their destination.

Match each statement below with the correct item -A connectivity device on data networks that logically subdivides a network into smaller, individual collision domains.

Match each statement below with the correct item -A connectivity device that operates at the Data Link layer of the OSI model and reads header information to forward packets according to their MAC addresses.

A(n) access node is the point at which a user's traffic enters or exits a carrier's network. _________________________

Match each statement below with the correct item -The time it takes for a router to recognize a best path in the event of a change or outage.

Which device accepts and retransmits signals over the network?

Match each statement below with the correct item -A communications method in which data transmitted in a continuous stream of bits.

A bridging technique in which a bridge polls the network to determine a packet's best path between nodes, is referred to as:

A(n) integrated access device is an opening on a computer's systems board that contains multiple electrical contacts into which the expansion board can be inserted. _________________________

What term is used to describe a hub that possesses processing capabilities and can therefore monitor network traffic, detect packet errors and collisions, and poll connected devices for information?

Does the term modular router refer to a device that enables a workstation to connect to the network and communicate with other computers?