Question 1

SLIP provides support for error detection,Internet Protocol (IP)address assignments,link testing,and synchronous communication.

Accepted Answer

A) True 
 B)False  False

Question 2

____ provides a basic method to encapsulate TCP/IP data.

Accepted Answer

A)  PPP
B)  PPPOE
C)  SLTCP
D)  SLIP D

Question 3

Discuss the advantage of the single transmit wire and single receive wire in a serial data transmission.

Accepted Answer

An advantage of serial data transmission is its simple connection requirements: a single transmit wire and a single receive wire (plus a ground wire).With only one transmit wire,it is not possible to send a separate clock signal with the waveform.This is referred to as asynchronous communication.To compensate,the start bit is used to synchronize the transmitter and receiver.

Question 4

Describe PPPoE.

Accepted Answer

The answer of Describe PPPoE....

Question 5

List the three types of service provided by the LLC protocol.

Accepted Answer

The answer of List the three types of service provided...

Question 6

Due to the many limitations,PPP,the Point-to-Point Protocol has been replaced by use of SLIP.

Accepted Answer

A) True 
 B)False

Question 7

Serial data transmission is handled by digital devices called ____.

Accepted Answer

A)  DARTs
B)  UARTs
C)  SARTs
D)  SRTs

Question 8

Explain the 7-bit,8-bit and 16-bit codes.

Accepted Answer

The answer of Explain the 7-bit,8-bit and 16-bit codes....

Question 9

A(n)____________________ is where networking data are transmitted or received.

Accepted Answer

The answer of A(n)____________________ is where networking data are transmitted...

Question 10

Match each item with a statement below.
-The first protocol used to transmit the Transmission Control Protocol/Internet Protocol over dial-up phone lines

Accepted Answer

A)  SLIP
B)  Parity
C)  Baud
D)  NetBEUI
E)  Serial

Question 11

The ____ provides the ability to encapsulate many different protocols over a serial connection.

Accepted Answer

A)  Point-to-Point Protocol
B)  Point-to-Point Tunneling Protocol
C)  Layer 2 Tunneling Protocol
D)  Serial Line Interface Protocol

Question 12

Match each item with a statement below.
-Originally used by IBM for its LAN Manager network

Accepted Answer

A)  SLIP
B)  Parity
C)  Baud
D)  NetBEUI
E)  Serial

Question 13

____ provides a transport mechanism to deliver NetBIOS messages over a LAN.

Accepted Answer

A)  NetOPS
B)  NetUI
C)  NetBEUI
D)  NetIOS

Question 14

____ provides all the functionality needed to share resources between networked computers,such as files and printers.

Accepted Answer

A)  TCP/IP
B)  NetOPS
C)  NetBIOS
D)  NetOS

Question 15

Error detection over PPP uses a(n)____________________ value to test for data validity.

Accepted Answer

The answer of Error detection over PPP uses a(n)____________________ value...

Question 16

Each bit of the waveform takes the same amount of time.

Accepted Answer

A) True 
 B)False

Question 17

The last two bits in the transmission frame for a wave form are the ____ bits.

Accepted Answer

A)  hold
B)  start
C)  stop
D)  separation

Question 18

____________________ names are the NetBIOS names that identify each machine on a Windows network.

Accepted Answer

The answer of ____________________ names are the NetBIOS names that...

Question 19

Discuss what happens when a protocol is bound to a network adapter.

Accepted Answer

The answer of Discuss what happens when a protocol is...

Question 20

Match each item with a statement below.
-Data communication that takes place one bit at a time over a single communication line

Accepted Answer

A)  SLIP
B)  Parity
C)  Baud
D)  NetBEUI
E)  Serial

Exam 7: Low-Level Protocols

SLIP provides support for error detection,Internet Protocol (IP)address assignments,link testing,and synchronous communication.

____ provides a basic method to encapsulate TCP/IP data.

Discuss the advantage of the single transmit wire and single receive wire in a serial data transmission.

Describe PPPoE.

List the three types of service provided by the LLC protocol.

Due to the many limitations,PPP,the Point-to-Point Protocol has been replaced by use of SLIP.

Serial data transmission is handled by digital devices called ____.

Explain the 7-bit,8-bit and 16-bit codes.

A(n)____________________ is where networking data are transmitted or received.

Match each item with a statement below. -The first protocol used to transmit the Transmission Control Protocol/Internet Protocol over dial-up phone lines

The ____ provides the ability to encapsulate many different protocols over a serial connection.

Match each item with a statement below. -Originally used by IBM for its LAN Manager network

____ provides a transport mechanism to deliver NetBIOS messages over a LAN.

____ provides all the functionality needed to share resources between networked computers,such as files and printers.

Error detection over PPP uses a(n)____________________ value to test for data validity.

Each bit of the waveform takes the same amount of time.

The last two bits in the transmission frame for a wave form are the ____ bits.

____________________ names are the NetBIOS names that identify each machine on a Windows network.

Discuss what happens when a protocol is bound to a network adapter.

Match each item with a statement below. -Data communication that takes place one bit at a time over a single communication line