Question 1

Consider the following linear programming problem: The above linear programming problem:
Maximize
4x1 + 2y2
Subject to:
4x1 + 2y2 ≤ 40
2x1 + y2 ≥ 20
X1, y2 ≥ 0

Accepted Answer

A)  has only one feasible solution
B)  has more than one optimal solution
C)  exhibits infeasibility
D)  exhibits unboundedness C

Question 2

Suppose the allowable increase and decrease for shadow price for a constraint are $25 (increase) and $10 (decrease). If the right hand side of that constraint were to increase by $10 the optimal solution would not change.

Accepted Answer

A) True 
 B)False  False

Question 3

Exhibit 3-1A winemaker in California's Napa Valley must decide how much of two types of wine she will produce from a particular variety of grapes. Each liter of table wine yields $8 profit, while each liter of desert wine produces $3 profit. The labor hours and bottling process time used for type of wine are given in the table below. Resources available include 200 labor hours and 80 hours of bottling process time. Assume the winemaker has more than enough grapes available to supply any feasible production plan.
 $\begin{array}{lll} 
& \text { Table } & \text { Desert } \
\text { Labor (Hours) } & 0.20 & 0.60 \
\text { Process Time (Hours) } & 0.30 & 0.10
\end{array}$

-[Part 3] Refer to Exhibit 3-1. Implement the model in Part 1 in Excel Solver and obtain an answer report. Which constraint(s) are binding on the optimal solution?

Accepted Answer

The constraints section of the answer report (below) shows that the labor and process constraints are binding.
 
$\begin{array}{l}
\text { Constraints }\
\begin{array}{lrrrr}
\hline \text { Cell } & \text { Name } & \text { Cell Value } & \text { Formula } & {\text { Status }} & \text { Slack } \
\hline \text { SC\$9 } & &&200 \$ \mathrm{SC} 9<=\$ \mathrm{E} \$ 9 & \text { Binding } & 0 \
\hline \$ \mathrm{SC} 10 && 80 & \$ \mathrm{~S} \$ 10<=\$ \mathrm{E} \$ 10 & \text { Binding } & 0 \
\hline
\end{array}
\end{array}$

Question 4

Exhibit 3-2Western Chassis produces high-quality polished steel and aluminum sheeting and two lines of industrial chassis for the rack mounting of Internet routers, modems, and other telecommunications equipment. The contribution margin (contribution toward profit) for steel sheeting is $0.40 per pound and for aluminum sheeting is $0.60 per pound. Western earns $12 contribution on the sale of a Standard chassis rack and $15 contribution on a Deluxe chassis rack. During the next production cycle, Western can buy and use up to 25,800 pounds of raw unfinished steel either in sheeting or in chassis. Similarly, 20,400 pounds of aluminum are available. One standard chassis rack requires 16 pounds of steel and 8 pounds of aluminum. A Deluxe chassis rack requires 12 pounds of each metal. The output of metal sheeting is restricted only by the capacity of the polisher. For the next production cycle, the polisher can handle any mix of the two metals up to 4,000 pounds of metal sheeting. Chassis manufacture can be restricted by either metal stamping or assembly operations; no polishing is required. During the cycle no more than 2,500 total chassis can be stamped, and there will be 920 hours of assembly time available. The assembly time required is 24 minutes for the Standard chassis rack and 36 minutes for the Deluxe chassis rack. Finally, market conditions limit the number of Standard chassis racks sold to no more than 1,200 Standard and no more than 1,000 Deluxe. Any quantities of metal sheeting can be sold.
-[Part 1] Refer to Exhibit 3-2. Find an optimal solution to Western's problem. What is the production plan, and what is the total revenue?

Accepted Answer

The answer of Exhibit 3-2Western Chassis produces high-quality polished steel...

Question 5

Exhibit 3-1A winemaker in California's Napa Valley must decide how much of two types of wine she will produce from a particular variety of grapes. Each liter of table wine yields $8 profit, while each liter of desert wine produces $3 profit. The labor hours and bottling process time used for type of wine are given in the table below. Resources available include 200 labor hours and 80 hours of bottling process time. Assume the winemaker has more than enough grapes available to supply any feasible production plan.
 $\begin{array}{lll} 
& \text { Table } & \text { Desert } \
\text { Labor (Hours) } & 0.20 & 0.60 \
\text { Process Time (Hours) } & 0.30 & 0.10
\end{array}$

-[Part 2] Refer to Exhibit 3-1. Using the graphical solution method, find an optimal solution to the model in Part 1 and determine the maximum profit.

Accepted Answer

The answer of Exhibit 3-1A winemaker in California's Napa Valley...

Question 6

Exhibit 3-2Western Chassis produces high-quality polished steel and aluminum sheeting and two lines of industrial chassis for the rack mounting of Internet routers, modems, and other telecommunications equipment. The contribution margin (contribution toward profit) for steel sheeting is $0.40 per pound and for aluminum sheeting is $0.60 per pound. Western earns $12 contribution on the sale of a Standard chassis rack and $15 contribution on a Deluxe chassis rack. During the next production cycle, Western can buy and use up to 25,800 pounds of raw unfinished steel either in sheeting or in chassis. Similarly, 20,400 pounds of aluminum are available. One standard chassis rack requires 16 pounds of steel and 8 pounds of aluminum. A Deluxe chassis rack requires 12 pounds of each metal. The output of metal sheeting is restricted only by the capacity of the polisher. For the next production cycle, the polisher can handle any mix of the two metals up to 4,000 pounds of metal sheeting. Chassis manufacture can be restricted by either metal stamping or assembly operations; no polishing is required. During the cycle no more than 2,500 total chassis can be stamped, and there will be 920 hours of assembly time available. The assembly time required is 24 minutes for the Standard chassis rack and 36 minutes for the Deluxe chassis rack. Finally, market conditions limit the number of Standard chassis racks sold to no more than 1,200 Standard and no more than 1,000 Deluxe. Any quantities of metal sheeting can be sold.
-Refer to Exhibit 3-2. What is the incremental contribution associated with adding an hour of assembly time? Over what range of increase is the marginal value valid?

Accepted Answer

The answer of Exhibit 3-2Western Chassis produces high-quality polished steel...

Question 7

Exhibit 3-1A winemaker in California's Napa Valley must decide how much of two types of wine she will produce from a particular variety of grapes. Each liter of table wine yields $8 profit, while each liter of desert wine produces $3 profit. The labor hours and bottling process time used for type of wine are given in the table below. Resources available include 200 labor hours and 80 hours of bottling process time. Assume the winemaker has more than enough grapes available to supply any feasible production plan.
 $\begin{array}{lll} 
& \text { Table } & \text { Desert } \
\text { Labor (Hours) } & 0.20 & 0.60 \
\text { Process Time (Hours) } & 0.30 & 0.10
\end{array}$

-[Part 5] Refer to Exhibit 3-1. Suppose the winemaker can obtain 100 addition labor hours. Can you use the sensitivity analysis obtained for Part 4 to determine her expected profit? Would her bottling plan change? Explain your answer.

Accepted Answer

The answer of Exhibit 3-1A winemaker in California's Napa Valley...

Question 8

Exhibit 3-2Western Chassis produces high-quality polished steel and aluminum sheeting and two lines of industrial chassis for the rack mounting of Internet routers, modems, and other telecommunications equipment. The contribution margin (contribution toward profit) for steel sheeting is $0.40 per pound and for aluminum sheeting is $0.60 per pound. Western earns $12 contribution on the sale of a Standard chassis rack and $15 contribution on a Deluxe chassis rack. During the next production cycle, Western can buy and use up to 25,800 pounds of raw unfinished steel either in sheeting or in chassis. Similarly, 20,400 pounds of aluminum are available. One standard chassis rack requires 16 pounds of steel and 8 pounds of aluminum. A Deluxe chassis rack requires 12 pounds of each metal. The output of metal sheeting is restricted only by the capacity of the polisher. For the next production cycle, the polisher can handle any mix of the two metals up to 4,000 pounds of metal sheeting. Chassis manufacture can be restricted by either metal stamping or assembly operations; no polishing is required. During the cycle no more than 2,500 total chassis can be stamped, and there will be 920 hours of assembly time available. The assembly time required is 24 minutes for the Standard chassis rack and 36 minutes for the Deluxe chassis rack. Finally, market conditions limit the number of Standard chassis racks sold to no more than 1,200 Standard and no more than 1,000 Deluxe. Any quantities of metal sheeting can be sold.
-Refer to Exhibit 3-2. An advertising agency has devised a marketing plan for the Western Chassis Company that will increase the market for Deluxe chassis. The plan will increase demand by 75 Deluxe chassis per month at a cost of $100 per month. Should Western adopt the plan? Briefly explain why.

Accepted Answer

The answer of Exhibit 3-2Western Chassis produces high-quality polished steel...

Question 9

If a manufacturing process takes 4 hours per unit of x and 2 hours per unit of y and a maximum of 100 hours of manufacturing process time are available, then an algebraic formulation of this constraint is:

Accepted Answer

A)  4x + 2y ≥ 100
B)  4x − 2y ≤ 100
C)  4x + 2y ≤ 100
D)  4x − 2y ≥ 100

Question 10

Exhibit 3-1A winemaker in California's Napa Valley must decide how much of two types of wine she will produce from a particular variety of grapes. Each liter of table wine yields $8 profit, while each liter of desert wine produces $3 profit. The labor hours and bottling process time used for type of wine are given in the table below. Resources available include 200 labor hours and 80 hours of bottling process time. Assume the winemaker has more than enough grapes available to supply any feasible production plan.
 $\begin{array}{lll} 
& \text { Table } & \text { Desert } \
\text { Labor (Hours) } & 0.20 & 0.60 \
\text { Process Time (Hours) } & 0.30 & 0.10
\end{array}$

-[Part 4] Refer to Exhibit 3-1. Obtain a sensitivity report for the model in Part 1. How much should the winemaker be willing to pay for an additional labor hour?

Accepted Answer

The answer of Exhibit 3-1A winemaker in California's Napa Valley...

Question 11

Suppose a company sells two different products, x and y, for net profits of $6 per unit and $3 per unit, respectively. The slope of the line representing the objective function is:

Accepted Answer

A)  0.5
B)  −0.5
C)  2
D)  −2

Question 12

The equation of the line representing the constraint 4x + 2y ≤ 100 passes through the points:

Accepted Answer

A)  (25,0)  and (0,50) 
B)  (0,25)  and (50,0) 
C)  (−25,0)  and (0,−50) 
D)  (0,−25)  and (−50,0)

Question 13

When the profit increases with a unit increase in a resource, this change in profit will be shown in Solver's sensitivity report as the:

Accepted Answer

A)  add-in price
B)  sensitivity price
C)  shadow price
D)  additional profit

Question 14

Suppose the allowable increase and decrease for an objective coefficient of a decision variable that has a current value of $50 are $25 (increase) and $10 (decrease). If the coefficient were to change from $50 to $65, the optimal value of the objective function would not change.

Accepted Answer

A) True 
 B)False

Question 15

In using Excel to solve linear programming problems, the changing cells represent the:

Accepted Answer

A)  value of the objective function
B)  constraints
C)  decision variables
D)  total cost of the model

Question 16

If a constraint has the equation 5x + 2y ≤ 60, then the constraint line passes through the points (0,12) and (30,0).

Accepted Answer

A) True 
 B)False

Question 17

Shadow prices are associated with nonbinding constraints, and show the change in the optimal objective function value when the right side of the constraint equation changes by one unit.

Accepted Answer

A) True 
 B)False

Question 18

When formulating a linear programming spreadsheet model, there is a set of designated cells that play the role of the decision variables. These are called the changing cells.

Accepted Answer

A) True 
 B)False

Question 19

Common errors in LP models that exhibit unboundedness are a constraint that has been omitted or an input which is incorrect.

Accepted Answer

A) True 
 B)False

Question 20

Exhibit 3-2Western Chassis produces high-quality polished steel and aluminum sheeting and two lines of industrial chassis for the rack mounting of Internet routers, modems, and other telecommunications equipment. The contribution margin (contribution toward profit) for steel sheeting is $0.40 per pound and for aluminum sheeting is $0.60 per pound. Western earns $12 contribution on the sale of a Standard chassis rack and $15 contribution on a Deluxe chassis rack. During the next production cycle, Western can buy and use up to 25,800 pounds of raw unfinished steel either in sheeting or in chassis. Similarly, 20,400 pounds of aluminum are available. One standard chassis rack requires 16 pounds of steel and 8 pounds of aluminum. A Deluxe chassis rack requires 12 pounds of each metal. The output of metal sheeting is restricted only by the capacity of the polisher. For the next production cycle, the polisher can handle any mix of the two metals up to 4,000 pounds of metal sheeting. Chassis manufacture can be restricted by either metal stamping or assembly operations; no polishing is required. During the cycle no more than 2,500 total chassis can be stamped, and there will be 920 hours of assembly time available. The assembly time required is 24 minutes for the Standard chassis rack and 36 minutes for the Deluxe chassis rack. Finally, market conditions limit the number of Standard chassis racks sold to no more than 1,200 Standard and no more than 1,000 Deluxe. Any quantities of metal sheeting can be sold.
-[Part 2] Refer to Exhibit 3-2. Obtain a sensitivity report for the solution reported in Part 1. Which constraints are binding?

Accepted Answer

The answer of Exhibit 3-2Western Chassis produces high-quality polished steel...

Exam 3: Introduction to Optimization Modeling

Consider the following linear programming problem: The above linear programming problem: Maximize 4x1 + 2y2 Subject to: 4x1 + 2y2 ≤ 40 2x1 + y2 ≥ 20 X1, y2 ≥ 0

Suppose the allowable increase and decrease for shadow price for a constraint are $25 (increase) and $10 (decrease). If the right hand side of that constraint were to increase by $10 the optimal solution would not change.

If a manufacturing process takes 4 hours per unit of x and 2 hours per unit of y and a maximum of 100 hours of manufacturing process time are available, then an algebraic formulation of this constraint is:

Suppose a company sells two different products, x and y, for net profits of $6 per unit and $3 per unit, respectively. The slope of the line representing the objective function is:

The equation of the line representing the constraint 4x + 2y ≤ 100 passes through the points:

When the profit increases with a unit increase in a resource, this change in profit will be shown in Solver's sensitivity report as the:

Suppose the allowable increase and decrease for an objective coefficient of a decision variable that has a current value of $50 are $25 (increase) and $10 (decrease). If the coefficient were to change from $50 to $65, the optimal value of the objective function would not change.

In using Excel to solve linear programming problems, the changing cells represent the:

If a constraint has the equation 5x + 2y ≤ 60, then the constraint line passes through the points (0,12) and (30,0).

Shadow prices are associated with nonbinding constraints, and show the change in the optimal objective function value when the right side of the constraint equation changes by one unit.

When formulating a linear programming spreadsheet model, there is a set of designated cells that play the role of the decision variables. These are called the changing cells.

Common errors in LP models that exhibit unboundedness are a constraint that has been omitted or an input which is incorrect.