Exam 8: Network Hardware in Depth

The time it takes for all the routing tables on every router in a network to be fully updated,either when a change occurs or according to a schedule,is called the speed of what?

Free

(Multiple Choice)

4.8/5

(29)

Question 1

Correct Answer:

Verified

Which of the following is the fastest switching mode?

Free

(Multiple Choice)

4.8/5

(30)

Question 2

Correct Answer:

Verified

What is the name of the value assigned to a routing protocol to indicate its reliability compared with other routing protocols that might be in use on the same router?

Free

(Multiple Choice)

4.8/5

(34)

Question 3

Correct Answer:

Verified

Each interface on a router must have an IP address and what else to be able to communicate on the network?

(Multiple Choice)

4.7/5

(33)

Question 4

Which is the strongest form of wireless security?

(Multiple Choice)

4.8/5

(29)

Question 5

Match each item with a statement below. -damaged frames do not get forwarded

(Multiple Choice)

4.8/5

(27)

Question 6

A switch that is configured to use the Spanning Tree Protocol will place a port in ____________ mode if sending traffic to it may cause a switching loop.

(Short Answer)

4.8/5

(31)

Question 7

Which switching method reads a minimum of 64 bytes of an Ethernet frame before forwarding the frame?

(Multiple Choice)

4.8/5

(33)

Question 8

Communications through a router are noticeably faster than communications through a switch.

(True/False)

4.9/5

(33)

Question 9

The major disadvantage to using store-and-forward switching in a large network is that it will slow down the speed of network traffic.

(True/False)

4.9/5

(32)

Question 10

Which of the following is not a function that would be found in a managed switch?

(Multiple Choice)

4.9/5

(38)

Question 11

Which of the following is the switching protocol that is used to eliminate the possibility of switching loops?

(Multiple Choice)

4.8/5

(37)

Question 12

Which of the following is not a true statement regarding the function of a switch?

(Multiple Choice)

4.9/5

(31)

Question 13

A router's final task when handling a packet is to send the packet on to its next and possibly final destination; this is referred to as packet ____________.

(Short Answer)

4.9/5

(25)

Question 14

All network switches require substantial configuration before they can be put into operation in a network.

(True/False)

4.7/5

(43)

Question 15

Which of the following would be found in a routing table on a router? (Choose all that apply.)

(Multiple Choice)

4.8/5

(35)

Question 16

Changing the SSID on the access point and disabling SSID broadcast is sufficient security for most wireless networks.

(True/False)

4.9/5

(25)

Question 17

When a router's interface is configured with multiple IP addresses with each address belonging to different networks,what is it called?

(Multiple Choice)

4.8/5

(38)

Question 18

What is an example of an EGP?

(Multiple Choice)

5.0/5

(34)

Question 19

Match each item with a statement below. -value that tells routers the best path to the destination network

(Multiple Choice)

4.9/5

(36)

Question 20

Showing 1 - 20 of 50

The time it takes for all the routing tables on every router in a network to be fully updated,either when a change occurs or according to a schedule,is called the speed of what?

Which of the following is the fastest switching mode?

What is the name of the value assigned to a routing protocol to indicate its reliability compared with other routing protocols that might be in use on the same router?

Each interface on a router must have an IP address and what else to be able to communicate on the network?

Which is the strongest form of wireless security?

Match each item with a statement below. -damaged frames do not get forwarded

A switch that is configured to use the Spanning Tree Protocol will place a port in ____________ mode if sending traffic to it may cause a switching loop.

Which switching method reads a minimum of 64 bytes of an Ethernet frame before forwarding the frame?

Communications through a router are noticeably faster than communications through a switch.

The major disadvantage to using store-and-forward switching in a large network is that it will slow down the speed of network traffic.

Which of the following is not a function that would be found in a managed switch?

Which of the following is the switching protocol that is used to eliminate the possibility of switching loops?

Which of the following is not a true statement regarding the function of a switch?

A router's final task when handling a packet is to send the packet on to its next and possibly final destination; this is referred to as packet ____________.

All network switches require substantial configuration before they can be put into operation in a network.

Which of the following would be found in a routing table on a router? (Choose all that apply.)

Changing the SSID on the access point and disabling SSID broadcast is sufficient security for most wireless networks.

When a router's interface is configured with multiple IP addresses with each address belonging to different networks,what is it called?

What is an example of an EGP?

Match each item with a statement below. -value that tells routers the best path to the destination network

Introduction to Computer Networks

Network Hardware Essentials

Network Topologies and Technologies

Network Media

Network Protocols

Ip Addressing

Network Reference Models and Standards

Introduction to Network Security

Wide Area Networking and Cloud Computing

Network Operating System Fundamentals

Network Management and Administration

Troubleshooting and Support

Filters

Exam 8: Network Hardware in Depth

The time it takes for all the routing tables on every router in a network to be fully updated,either when a change occurs or according to a schedule,is called the speed of what?

Which of the following is the fastest switching mode?

What is the name of the value assigned to a routing protocol to indicate its reliability compared with other routing protocols that might be in use on the same router?

Each interface on a router must have an IP address and what else to be able to communicate on the network?

Which is the strongest form of wireless security?

Match each item with a statement below.​ -damaged frames do not get forwarded

A switch that is configured to use the Spanning Tree Protocol will place a port in ____________ mode if sending traffic to it may cause a switching loop.

Which switching method reads a minimum of 64 bytes of an Ethernet frame before forwarding the frame?

Communications through a router are noticeably faster than communications through a switch.

The major disadvantage to using store-and-forward switching in a large network is that it will slow down the speed of network traffic.

Which of the following is not a function that would be found in a managed switch?

Which of the following is the switching protocol that is used to eliminate the possibility of switching loops?

Which of the following is not a true statement regarding the function of a switch?

A router's final task when handling a packet is to send the packet on to its next and possibly final destination; this is referred to as packet ____________.

All network switches require substantial configuration before they can be put into operation in a network.

Which of the following would be found in a routing table on a router? (Choose all that apply.)

Changing the SSID on the access point and disabling SSID broadcast is sufficient security for most wireless networks.

When a router's interface is configured with multiple IP addresses with each address belonging to different networks,what is it called?

What is an example of an EGP?

Match each item with a statement below.​ -value that tells routers the best path to the destination network

Introduction to Computer Networks

Network Hardware Essentials

Network Topologies and Technologies

Network Media

Network Protocols

Ip Addressing

Network Reference Models and Standards

Introduction to Network Security

Wide Area Networking and Cloud Computing

Network Operating System Fundamentals

Network Management and Administration

Troubleshooting and Support

Filters

Match each item with a statement below. -damaged frames do not get forwarded

Match each item with a statement below. -value that tells routers the best path to the destination network