Question 1

A ____________ is used to make connections between the network interface card and the other vital components of the computer,such as the central processing unit.

Accepted Answer

The answer of A ____________ is used to make connections...

Question 2

What type of routing protocol are RIP and RIPv2?

Accepted Answer

A)  distance-state protocol 
B)  link-state protocol 
C)  hybrid protocol 
D)  distance-vector protocol 
A)  distance-state protocol 
B)  link-state protocol 
C)  hybrid protocol 
D)  distance-vector protocol

Question 3

Match each item with a statement below.​
-sends entire routing table to all routers at a scheduled time

Accepted Answer

A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP 
A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP

Question 4

Briefly describe the three types of switching methods.

Accepted Answer

Cut-through switching is the fastest; it

Question 5

Briefly describe an entry in a routing table from a router.

Accepted Answer

The first value describes how the router

Question 6

Access control lists can be configured based on which of the following? (Choose all that apply.)

Accepted Answer

A)  protocol 
B)  source MAC address 
C)  destination network 
D)  destination MAC address 
E)  source IP address 
A)  protocol 
B)  source MAC address 
C)  destination network 
D)  destination MAC address 
E)  source IP address

Question 7

What is BGP and how is it used?

Accepted Answer

BGP is classified as a path-vector routi

Question 8

What are the three most common encryption protocols for wireless security? Which is the strongest? Which is the weakest?

Accepted Answer

They are WEP,WPA,and

Question 9

What is a trunk port?

Accepted Answer

When a switch is configured wi

Question 10

What is a broadcast storm?

Accepted Answer

A broadcast storm is

Question 11

Match each item with a statement below.​
-configured to carry VLAN traffic

Accepted Answer

A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP 
A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP

Question 12

Match each item with a statement below.​
-routing protocol category in which the routing protocol is used to exchange routing information between autonomous systems

Accepted Answer

A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP 
A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP

Question 13

Which advanced feature of a NIC allows a computer to download an OS from the network instead of from a local drive?

Accepted Answer

A)  onboard coprocessor 
B)  advanced configuration power management interface 
C)  shared system memory 
D)  preboot execution environment 
A)  onboard coprocessor 
B)  advanced configuration power management interface 
C)  shared system memory 
D)  preboot execution environment

Question 14

When a switch receives a broadcast frame,it ____________ the frame out all ports.

Accepted Answer

The answer of When a switch receives a broadcast frame,it...

Question 15

Match each item with a statement below.​
-sends status to all routers whenever there is a change

Accepted Answer

A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP 
A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP

Question 16

What type of hacker uses a scanning device to find unsecured wireless networks and break into those networks?

Accepted Answer

A)  white hat 
B)  wardriver 
C)  script kiddy 
D)  phisher 
A)  white hat 
B)  wardriver 
C)  script kiddy 
D)  phisher

Question 17

What is the difference between the way that a distance-vector routing protocol and a link-state routing protocol update their networks?

Accepted Answer

A distance-vector routing protocol sends

Question 18

Match each item with a statement below.​
-entire frame is read before forwarding it to the destination port

Accepted Answer

A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP 
A) distance-vector protocol 
B) fragment-free switching 
C) cut-through switching 
D) store-and-forward switching 
E) Spanning Tree Protocol
F)trunk port
G)EGP
H)link-state protocol
I)metric
J)IGP

Question 19

What command issued from a command prompt will display the routing table in Windows?

Accepted Answer

A)  route table 
B)  route print 
C)  route delete 
D)  route config 
A)  route table 
B)  route print 
C)  route delete 
D)  route config

Question 20

What does the Spanning Tree Protocol do?

Accepted Answer

The Spanning Tree Protocol is used to de

A ____________ is used to make connections between the network interface card and the other vital components of the computer,such as the central processing unit.

What type of routing protocol are RIP and RIPv2?

Match each item with a statement below. -sends entire routing table to all routers at a scheduled time

Briefly describe the three types of switching methods.

Briefly describe an entry in a routing table from a router.

Access control lists can be configured based on which of the following? (Choose all that apply.)

What is BGP and how is it used?

What are the three most common encryption protocols for wireless security? Which is the strongest? Which is the weakest?

What is a trunk port?

What is a broadcast storm?

Match each item with a statement below. -configured to carry VLAN traffic

Match each item with a statement below. -routing protocol category in which the routing protocol is used to exchange routing information between autonomous systems

Which advanced feature of a NIC allows a computer to download an OS from the network instead of from a local drive?

When a switch receives a broadcast frame,it ____________ the frame out all ports.

Match each item with a statement below. -sends status to all routers whenever there is a change

What type of hacker uses a scanning device to find unsecured wireless networks and break into those networks?

What is the difference between the way that a distance-vector routing protocol and a link-state routing protocol update their networks?

Match each item with a statement below. -entire frame is read before forwarding it to the destination port

What command issued from a command prompt will display the routing table in Windows?

What does the Spanning Tree Protocol do?

Introduction to Computer Networks

Network Hardware Essentials

Network Topologies and Technologies

Network Media

Network Protocols

Ip Addressing

Network Reference Models and Standards

Introduction to Network Security

Wide Area Networking and Cloud Computing

Network Operating System Fundamentals

Network Management and Administration

Troubleshooting and Support

Filters

Exam 8: Network Hardware in Depth

A ____________ is used to make connections between the network interface card and the other vital components of the computer,such as the central processing unit.

What type of routing protocol are RIP and RIPv2?

Match each item with a statement below.​ -sends entire routing table to all routers at a scheduled time

Briefly describe the three types of switching methods.

Briefly describe an entry in a routing table from a router.

Access control lists can be configured based on which of the following? (Choose all that apply.)

What is BGP and how is it used?

What are the three most common encryption protocols for wireless security? Which is the strongest? Which is the weakest?

What is a trunk port?

What is a broadcast storm?

Match each item with a statement below.​ -configured to carry VLAN traffic

Match each item with a statement below.​ -routing protocol category in which the routing protocol is used to exchange routing information between autonomous systems

Which advanced feature of a NIC allows a computer to download an OS from the network instead of from a local drive?

When a switch receives a broadcast frame,it ____________ the frame out all ports.

Match each item with a statement below.​ -sends status to all routers whenever there is a change

What type of hacker uses a scanning device to find unsecured wireless networks and break into those networks?

What is the difference between the way that a distance-vector routing protocol and a link-state routing protocol update their networks?

Match each item with a statement below.​ -entire frame is read before forwarding it to the destination port

What command issued from a command prompt will display the routing table in Windows?

What does the Spanning Tree Protocol do?

Introduction to Computer Networks

Network Hardware Essentials

Network Topologies and Technologies

Network Media

Network Protocols

Ip Addressing

Network Reference Models and Standards

Introduction to Network Security

Wide Area Networking and Cloud Computing

Network Operating System Fundamentals

Network Management and Administration

Troubleshooting and Support

Filters

Match each item with a statement below. -sends entire routing table to all routers at a scheduled time

Match each item with a statement below. -configured to carry VLAN traffic

Match each item with a statement below. -routing protocol category in which the routing protocol is used to exchange routing information between autonomous systems

Match each item with a statement below. -sends status to all routers whenever there is a change

Match each item with a statement below. -entire frame is read before forwarding it to the destination port