Question 1

In regards to NAT,what is overloading?

Accepted Answer

A) Where NAT assigns the home network's IP address to a non-routable public IP address 
B) Where NAT assigns the home network's IP address to a single public IP address 
C) Where NAT assigns the home network's IP addresses to a single public IP address 
D) Where NAT assigns the home network's PAT IP address to a public NAT IP address 
A) Where NAT assigns the home network's IP address to a non-routable public IP address 
B) Where NAT assigns the home network's IP address to a single public IP address 
C) Where NAT assigns the home network's IP addresses to a single public IP address 
D) Where NAT assigns the home network's PAT IP address to a public NAT IP address C

Question 2

The preamble on the Ethernet packet is used to provide synchronization and negotiation of a data link.

Accepted Answer

A) True 
 B)False  False

Question 3

Excessive amounts of broadcasts on a network are called a broadcast storm.

Accepted Answer

A) True 
 B)False  True

Question 4

What is PAT?

Accepted Answer

A) Port address translation; it is used to store the home network's IP address and port numbers in a NAT lookup table. 
B) Port address translation; it is used to store the home network's MAC address and port numbers in a NAT lookup table. 
C) Port address translation; it is used to store the home network's public IP address and port numbers in a NAT lookup table. 
D) Port address transfer; it is used to store the home network's MAC address and port numbers in a NAT lookup table. 
A) Port address translation; it is used to store the home network's IP address and port numbers in a NAT lookup table. 
B) Port address translation; it is used to store the home network's MAC address and port numbers in a NAT lookup table. 
C) Port address translation; it is used to store the home network's public IP address and port numbers in a NAT lookup table. 
D) Port address transfer; it is used to store the home network's MAC address and port numbers in a NAT lookup table.

Question 5

What is a possible transfer rate in a 802.11ac wireless network?

Accepted Answer

A) 100Mbps 
B) 10Mbps 
C) 500Mbps 
D) 1Gbps 
A) 100Mbps 
B) 10Mbps 
C) 500Mbps 
D) 1Gbps

Question 6

Which OSI layer is considered the media access control layer?

Accepted Answer

A) Data Link 
B) Transport 
C) Presentation 
D) Application 
E) None of these answers are correct. 
A) Data Link 
B) Transport 
C) Presentation 
D) Application 
E) None of these answers are correct.

Question 7

You need to troubleshoot the wireless settings for your adapter in a Windows 8 environment.What section of Control Panel do you use?

Accepted Answer

A) Computers and Networking 
B) Network Connections 
C) Wireless Command Center 
D) Network and Sharing Center 
A) Computers and Networking 
B) Network Connections 
C) Wireless Command Center 
D) Network and Sharing Center

Question 8

The acronym TCP/IP stands for Transmission Controller Protocol/Intercommunication Protocol.

Accepted Answer

A) True 
 B)False

Question 9

There are 34 bits and 4 octets in an IPv4 address.

Accepted Answer

A) True 
 B)False

Question 10

Which OSI layer is responsible for the mechanical connection to the network?

Accepted Answer

A) Network 
B) Transport 
C) Data Link 
D) None of these answers are correct. 
A) Network 
B) Transport 
C) Data Link 
D) None of these answers are correct.

Question 11

Which OSI layer combines messages or segments into packets?

Accepted Answer

A) Physical 
B) Transport 
C) Network 
D) Data Link 
E) None of these answers are correct. 
A) Physical 
B) Transport 
C) Network 
D) Data Link 
E) None of these answers are correct.

Question 12

The OSI layer responsible for data compression and encryption is which of these?

Accepted Answer

A) Transport 
B) Presentation 
C) Application 
D) network 
E) None of these answers are correct. 
A) Transport 
B) Presentation 
C) Application 
D) network 
E) None of these answers are correct.

Question 13

What is the goal of WPS in wireless networking today?

Accepted Answer

A) To allow a home user to connect many more devices to the wireless network 
B) To permit the configuration of multiple access points in the home network 
C) To allow printing over the wireless network 
D) To allow the configuration of security without the user inputting a long complex string of characters 
A) To allow a home user to connect many more devices to the wireless network 
B) To permit the configuration of multiple access points in the home network 
C) To allow printing over the wireless network 
D) To allow the configuration of security without the user inputting a long complex string of characters

Question 14

Your Windows 8 system Control Panel has been left in the default configuration.What major grouping would you enter in order to manipulate the Network Interface Card settings?

Accepted Answer

A) Network and Internet 
B) LAN and Computers 
C) Computers and Users 
D) Systems 
A) Network and Internet 
B) LAN and Computers 
C) Computers and Users 
D) Systems

Question 15

What is the purpose of a wireless router?

Accepted Answer

A) This device is used to connect only wireless devices to a broadband Internet connection. 
B) This device is used to interconnect both wireless and wired devices and establish the broadband connection to the Internet. 
C) This device is used only in intranets. 
D) This device is used in token-ring networks to manage the passing of the token. 
A) This device is used to connect only wireless devices to a broadband Internet connection. 
B) This device is used to interconnect both wireless and wired devices and establish the broadband connection to the Internet. 
C) This device is used only in intranets. 
D) This device is used in token-ring networks to manage the passing of the token.

Question 16

MAC is the acronym for multimedia access controller.

Accepted Answer

A) True 
 B)False

Question 17

What frequency band is used by 802.11ac?

Accepted Answer

A) 5GHz 
B) 2.4GHz 
C) 6GHz 
D) 2GHz 
A) 5GHz 
B) 2.4GHz 
C) 6GHz 
D) 2GHz

Question 18

Which OSI layer is responsible for adding a header that includes information used in routing?

Accepted Answer

A) Data Link 
B) Application 
C) Physical 
D) Network 
A) Data Link 
B) Application 
C) Physical 
D) Network

Question 19

What is the Wi-Fi Alliance?

Accepted Answer

A) An organization that tests and certifies wireless equipment for compliance with the 805.3 standards 
B) An organization that tests and certifies wireless equipment for compliance with the RS-232C standards 
C) An organization that tests and certifies wireless equipment for compliance with the 802.11x standards 
D) An organization that tests and certifies wireless equipment for compliance with the 858.n standards 
A) An organization that tests and certifies wireless equipment for compliance with the 805.3 standards 
B) An organization that tests and certifies wireless equipment for compliance with the RS-232C standards 
C) An organization that tests and certifies wireless equipment for compliance with the 802.11x standards 
D) An organization that tests and certifies wireless equipment for compliance with the 858.n standards

Question 20

What is the purpose of a range extender?

Accepted Answer

A) It relays the wireless signals from an access point or wireless router into areas with a weak signal or no signal at all. 
B) It is used to extend the tuning range of the wireless router so both TCP and UDP data traffic can be received. 
C) It is used with fiber optics to extend the distance. 
D) None of these answers are correct. 
A) It relays the wireless signals from an access point or wireless router into areas with a weak signal or no signal at all. 
B) It is used to extend the tuning range of the wireless router so both TCP and UDP data traffic can be received. 
C) It is used with fiber optics to extend the distance. 
D) None of these answers are correct.

In regards to NAT,what is overloading?

The preamble on the Ethernet packet is used to provide synchronization and negotiation of a data link.

Excessive amounts of broadcasts on a network are called a broadcast storm.

What is PAT?

What is a possible transfer rate in a 802.11ac wireless network?

Which OSI layer is considered the media access control layer?

You need to troubleshoot the wireless settings for your adapter in a Windows 8 environment.What section of Control Panel do you use?

The acronym TCP/IP stands for Transmission Controller Protocol/Intercommunication Protocol.

There are 34 bits and 4 octets in an IPv4 address.

Which OSI layer is responsible for the mechanical connection to the network?

Which OSI layer combines messages or segments into packets?

The OSI layer responsible for data compression and encryption is which of these?

What is the goal of WPS in wireless networking today?

Your Windows 8 system Control Panel has been left in the default configuration.What major grouping would you enter in order to manipulate the Network Interface Card settings?

What is the purpose of a wireless router?

MAC is the acronym for multimedia access controller.

What frequency band is used by 802.11ac?

Which OSI layer is responsible for adding a header that includes information used in routing?

What is the Wi-Fi Alliance?

What is the purpose of a range extender?

Physical Layer Cabling: Twisted Pair

Physical Layer Cabling: Fiber Optics

Wireless Networking

Interconnecting the Lans

Tcp/Ip

Introduction to Router Configuration

Introduction to Switch Configuration

Routing Protocols

Internet Technologies: Out to the Internet

Troubleshooting

Network Security

Cloud Computing and Virtualization

Codes and Standards

Filters

Exam 1: Introduction to Computer Networks

In regards to NAT,what is overloading?

The preamble on the Ethernet packet is used to provide synchronization and negotiation of a data link.

Excessive amounts of broadcasts on a network are called a broadcast storm.

What is PAT?

What is a possible transfer rate in a 802.11ac wireless network?

Which OSI layer is considered the media access control layer?

You need to troubleshoot the wireless settings for your adapter in a Windows 8 environment.What section of Control Panel do you use?

The acronym TCP/IP stands for Transmission Controller Protocol/Intercommunication Protocol.

There are 34 bits and 4 octets in an IPv4 address.

Which OSI layer is responsible for the mechanical connection to the network?

Which OSI layer combines messages or segments into packets?

The OSI layer responsible for data compression and encryption is which of these?

What is the goal of WPS in wireless networking today?

Your Windows 8 system Control Panel has been left in the default configuration.What major grouping would you enter in order to manipulate the Network Interface Card settings?

What is the purpose of a wireless router?

MAC is the acronym for multimedia access controller.

What frequency band is used by 802.11ac?

Which OSI layer is responsible for adding a header that includes information used in routing?

What is the Wi-Fi Alliance?

What is the purpose of a range extender?

Physical Layer Cabling: Twisted Pair

Physical Layer Cabling: Fiber Optics

Wireless Networking

Interconnecting the Lans

Tcp/Ip

Introduction to Router Configuration

Introduction to Switch Configuration

Routing Protocols

Internet Technologies: Out to the Internet

Troubleshooting

Network Security

Cloud Computing and Virtualization

Codes and Standards

Filters